Results 1 to 2 of 2

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: Walmart iVoice working w/vnotes

  1. #1
    Smile Walmart iVoice working w/vnotes
    I got the $25 Walmart ipod iVoice to work with vnotes which means the touch will work with voip when it comes out 1-1-08. The mod to the unit is not too hard. U4 is a Max9812 like the one the mic project boys have been working on. The 'secret' is to remove R24 (a 0 ohm) resister near the very edge of the board. One side is connected to pin 1 of U4. That is the amp chip enable pin. The pin is low via other hardware on the board.
    Now wire from where the R24 U4 was to one side of the LED. That will put 3.3 VDC on pin 1 of U4 turning it ON ! Now the mic amp is on and working.
    The beauty of all this is the mic is available at Walmart for $25 and it has a line in plug to boot !
    I hope this helps further the voip project by making the mic available nearly everywhere.
    Earl
    http://macally.com
    It is the iVoice III

  2. #2
    Owner / Founder - ModMyi
    aka cash7c3
    Cody Overcash's Avatar
    Join Date
    May 2007
    Location
    Denver, CO
    Posts
    11,920
    Thanks
    339
    Thanked 15,254 Times in 649 Posts

    yeah you are starting to post this repeatedly. one is enough the rest is considered spam

    pretty sure walmart doesnt carry this. obviously "macalley.com" does, you appear to have some affiliation with them. stop spamming or you will be removed.
    Last edited by Cody Overcash; 2007-12-26 at 01:52 AM. Reason: Automerged Doublepost

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •