Page 13 of 15 FirstFirst ... 31112131415 LastLast
Results 241 to 260 of 291

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: 1.1.4 iPhone Unlock, Jailbreak, and Activation!!!! [OS X | Independence]

  1. #241
    Quote Originally Posted by Bugs16 View Post
    I believe I followed all the instructions. Independence appears to have worked correctly and my iphone shows jailbroken & activated. SSH was installed and (I thought) the Installer app was installed (the icon shows and it runs), but every application I try to install results in the "Main Execution Script Failure" error. When I connect via SSH (see? it did install) and open a terminal session there is no Applications directory. There are no basic unix binary files (ls, mkdir, etc.) in any of the directories I can access so I can't even list the directories. all I get is the basic stripped bash shell (as sh) and the ability to chmod and cd around but there appear to be very few files in the directory structure. Any idea how I recover from this and get my filesystem back?

    Did I mention that other than this, all the normal functions of my iPhone seem to work fine? I can sync and move files with iTunes, etc., make and receive calls and SMS, and access the net from wifi and EDGE. I just don't have any files and I can't install any files via Installer or via SFTP (it starts and fails when it tries to stat the directory because ls isn't available).
    I had to restart my iphone a couple times, then I stopped getting those errors.

  2. #242
    Quote Originally Posted by phungy View Post
    You both should have used this method to install Installer. Worked like a charm
    Thanks. I was having the same problem w/ my OTB 1.1.1 and I just ran the terminal commands and it works now!!!

    THANKS A LOT!
    +1

  3. #243
    What's Jailbreak?
    Join Date
    Feb 2008
    Location
    Kuwait, Farwaniya
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Actually i used the same software to unlock my iphone using windows. all you have to do is to access that file, thru command prompt. then just follows the steps and your good to go. good luck...

    most of the third party application wont run on 1.1.4 firmware. but thier is a patch for it, that you can install 1.1.3 on your 1.1.4 iphone.

  4. #244
    Quote Originally Posted by pro_viruz View Post
    Actually i used the same software to unlock my iphone using windows. all you have to do is to access that file, thru command prompt. then just follows the steps and your good to go. good luck...

    most of the third party application wont run on 1.1.4 firmware. but thier is a patch for it, that you can install 1.1.3 on your 1.1.4 iphone.
    Where is that patch?? I have been looking for it.

  5. #245
    Hi,

    I am fairly new to this forum and was hoping I could get some instructions/help.

    I have a 1.0.2 iphone (3.9BL) software unlocked (do not know which one). I want to upgrade to a 1.1.4 jailbroken and unlocked phone. Could anyone give me some basic step by step guidelines to follow.

    I have been searching through so many forums and sites and spend a lot of time but could not find anything concise, just bits and pieces from various replies.

    I tried to start the process from what I read here, but when i connect my iphone and load iTunes and press Shift+Restore it opens an windows dialog box ??? No clue what to do from here onwards.

    Could somebody help me with the steps. I shall be very thankful !!!

  6. #246
    Quote Originally Posted by kpavery View Post
    An apple phone for apple computers.
    you're an Apple computer?

  7. #247
    Quote Originally Posted by iPhoneWriter View Post
    On the chance it might help someone else, here are the steps I followed to successfully upgrade to the v1.1.4 firmware release.

    Scenario Particulars:
    • Apple MacBook, latest version of operating system/updates (Leopard 10.5.2)
    • Latest version of iTunes
    • Day One iPhone w/3.9BL, v1.1.3 with the latest Baseband and Unlock'd to run on T-Mobile (T-Mobile SIM installed the entire time.)


    Steps Followed:

    1. Used iTunes to Synch/Backup the iPhone, before beginning
    2. Once synched and backed up:
    3. Restored to v1.1.4 using iTunes
    4. Once restored to v1.1.4, closed iTunes
  8. Downloaded "ZiPhone-1.1.4_by_JBLP.zip" (a modified version of ZiPhone) from this link right here.
  9. Unzipped downloaded file, and executed "./ziphone -a -j" to Activate, Jailbreak and install the Installer application. NOTE: This process took about one (1) minute to complete.
  10. Set "Auto Lock" to never in Settings.
  11. Configured / Established Wi-Fi access.
  12. Installed requisite software packages:
  13. Launched Installer application and refreshed "Sources" to ensure most recent applications.
  14. Once "Sources" successfully refreshed, applied any/all available "Updates" and exited Installer application, to ensure updates applied.
  15. Re-Launched Installer application and confirmed no additional updates were available.
  16. Installed BSD Subsystem and exited Installer application, to ensure updates applied.
  17. Re-Launched Installer application and confirmed BSD Subsystem is installed and that no additional updates were available.
  18. Added http://installer.iClarified.com to "Sources" and relaunched the Installer application, to installation/updates applied.
  19. Re-Launched Installer application and refreshed "Sources" to confirm that the iClarified source is installed and that no additional updates were available.
  • Unlocked the iPhone, for use on networks other than the Death Star.
  • Launched Installer application and the 'iClarified" folder from the Install tab/page
  • Installed "Unlock (1.1.4) application. NOTE: During this process, I received a popup asking me which Wi-Fi network to join. I simply selected my Wi-Fi network (the one previously setup in step #6 above) and the process completed without issue. This process took about five (5) minutes to complete.
  • Exited Installed application and rebooted phone.


  • Scenario Results:

    iPhone Particulars:



    There is a little redundancy built-in, if you read/follow each step as outlined, but I consider this to be a good thing as it errors on the side of caution.

    As always, I hope this helps more than it hurts! I just follow step by step and works like charm

    thanks
    Reply With Quote Reply With Quote

  • The Following User Says Thank You to gilprado For This Useful Post:

    majagama (2008-03-02)

  • #248
    How abt the windows users?

  • #249
    Default Will this work with any bootlader
    I have an 1.1.2 iphone with bootloader 3.9 does anyone know if it will unlock it too?
    Has anybody tested it?

  • #250
    Quote Originally Posted by gilprado View Post
    I just follow step by step and works like charm

    thanks
    Glad to help!
    - iPhoneWriter.com

  • #251
    I was able to get around the youtube error "Cannot access youtube" after using "Do it all" on ZiPhone 2.5.

    Since I'm an AT&T customer, I really don't have to activate or unlock. I instead did the just the jailbreak and youtube worked (woo hoo), but being the nerd that I am I did want my phone unlocked, so I went back to ZiPhone 2.5 and under the advanced features just checked unlock and it worked! And youtube still works! I didn't try activate but if you're on another carrier you might want to try jailbreaking then under advanaced features use the unlock and activate.

    Hope this helps some frustrated people out there.

  • #252
    iPhone? More like MyPhone
    Join Date
    Oct 2007
    Location
    United States
    Posts
    194
    Thanks
    5
    Thanked 21 Times in 15 Posts

    Quote Originally Posted by tntmorgan View Post
    I was able to get around the youtube error "Cannot access youtube" after using "Do it all" on ZiPhone 2.5.

    Since I'm an AT&T customer, I really don't have to activate or unlock. I instead did the just the jailbreak and youtube worked (woo hoo), but being the nerd that I am I did want my phone unlocked, so I went back to ZiPhone 2.5 and under the advanced features just checked unlock and it worked! And youtube still works! I didn't try activate but if you're on another carrier you might want to try jailbreaking then under advanaced features use the unlock and activate.

    Hope this helps some frustrated people out there.
    mmh, that is very interesting that doing them "out of order" that it may as well fix things. Weird, but whatever works.

    I did the "Do it all" and everything works fine. No problems, no mail crashing, YouTube, SMS, everything works perfect like a charm.

  • The Following User Says Thank You to cWanja For This Useful Post:

    majagama (2008-03-02)

  • #253
    Thanks a lot gilprado.

    Guys,

    I looked up a few videos on youtube which seemed to have lesser steps : [ame="http://youtube.com/watch?v=U5U_0qJ5mkQ"]YouTube - ZiPhone 2.4 GUI33 Complete Walkthrough[/ame]

    I had a question on this :
    Do you think with my version software unlocked 1.0.2 (3.9BL) needs to be virginized before I do a restore to 1.1.4 ?

    Does that/would that make any difference (as some say that software unlocks for 1.0.2 were not too clean) or does restoring through iTunes automatically reset/clean any issues with 1.0.2 software unlock ?

    Thanks again !

  • #254
    Ok, so I've downloaded the file, opened the folder and before I was using all of my brain power, stared the app directly from the file instead of copying it to my hard drive. I read in the read me file to not do this because it won't work. when downloading the firmware it looked as tough it was stuck so I force quit it. I'm sure this was the absolutely smartest thing that I could do and reopened it from the dmg and copied it to my hard drive and opened it from there. seemed to be working fine, but instead of it trying to download the firmware when I ask it to jailbreak it, it immediately tries to create a RAM disk and fails saying "couldn't extract firmware file contents." I've tried deleting the app and its folder and the dmg and downloading it again, and I've tried restoring my iphone.

    Sorry for the epic post, but got any suggestions?

    ~h

  • #255
    this worked for me like a charm

  • #256
    the Independence tool is very handy,
    one problem I encounter is that Installer App. does not work anymore, even after instaling it over Indepenence, wenn I want to install a package it give me an ERROR: Main script execution failed.
    Somebody know how to solve this problem?

  • #257
    Quote Originally Posted by mdhulst View Post
    the Independence tool is very handy,
    one problem I encounter is that Installer App. does not work anymore, even after instaling it over Indepenence, wenn I want to install a package it give me an ERROR: Main script execution failed.
    Somebody know how to solve this problem?
    You don't want to install Installer via independence. Use this method to install Installer via Fugu. Worked like a charm and installer works!
     15" Macbook Pro T8300 | 4GB RAM | 200GB
     24" iMac T7700 | 3GB RAM | 320GB
     iPhone 8GB | 2.2 | T-Mobile

  • #258
    Anyone knows if MiM (Make it Mine) of Erica Sadum is updated to work with Firmware 1.1.4??...

  • #259
    hey guys.. im pretty new at this. so i dl the independence and everything works fine. according to the info on the independence.. my phone has been jailbreak.

    now i cant see any changes or software on it.

    any help would do.
    thanks.

  • #260
    can anybody help me, I have an unlocked 1.11 iphone, already jailbroken. If anybody has the time to walk me through this, hit me up on AIM. Kean0885 and Oh, Im a windows user and a tmobile customer.

  • Page 13 of 15 FirstFirst ... 31112131415 LastLast
    Posting Permissions
    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •