Page 9 of 17 FirstFirst ... 7891011 ... LastLast
Results 161 to 180 of 337

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: We haz Windows Quickpwn 2.1!!!

  1. #161
    Well had 1g 2.0 and just used quickpowned to 2.1 no problem. I did a clean restore with itunes then used quickpown. Its unlocked and jailbroken and now Im restoring all my info from my old backup.

    WHOA wtf? It wont restore my old backup, it says its corrupt or incompatible? Uh anyone?
    Last edited by DamianMavis; 2008-09-20 at 04:23 PM.

  2. #162
    am I the only one that after i load the 2.1 ipsw file nothing else happens..the arrow doesnt turn blue to proceed to the next step it just stays gray

  3. #163
    Again I have a 1st gen iPhone still with a at&t contract but want it unlocked so I can use my T-Mo simcard. I went through the whole process on the quickpwn to unlock and then installed bootneuter and the settings in bootneuter show already what it should be to be unlocked but when i put the other simcard in I get that emergency screen and it's telling me to connect to itunes. I can still make calls but can't get rid of that annoying emergency screen. Can anyone recommend anything? Or is it because I don't have a custom firmware with an unlocked version.

  4. #164
    Quote Originally Posted by franklinromeo View Post
    I've got a 2g Iphone with 1.1.4
    How to I go about jailbreaking/unlocking with this quickpwn?
    I'm completely new to this.
    Do i restore and lose my apps and stuff or what?
    Do I need to update to latest itunes?
    Thanks for all the help
    hit update in itunes, then use quickpwn

    Quote Originally Posted by andrunious View Post
    where can i get the 2.1 firmware? its not in the downloads section
    download it trough itunes

    Quote Originally Posted by Bernard iPHONE View Post
    Dudes u all confusing me!! Ok, all I want to know is if I can unlcok my 3G iphone with this amazing software. I have already updated it to 2.1. How to install QuickPwn on to the iphone? Do I have to do a backup? If so how do I do that? Can this software run on Vista or Win XP?

    Thank you
    NO 3G UNLOCK YET, JUST JAIL BREAK

    not just pointing it out to you, to everyone with a 3g, that keeps asking the same question, read the first post

    Quote Originally Posted by nico_swd View Post
    Check Cydia, there's an upgrade for Snapture which works with 2.1. (Haven't tried it yet, but that's what the changelog says at least.)
    hadnt seen that, its a new update must have been done early this morning, last time i checked it was 2 am and it was still version 2.0, now 2.1
    Last edited by drloco149; 2008-09-20 at 05:56 PM. Reason: Automerged Doublepost

  5. #165
    So I fudged my upgrade by not taking everything off (winterboard, makeitmine, etc) eventually did a full restore to 2.1 and then QuickPwned. It somewhat works? The wireless refuses to connect to any wireless access point unless I manually enter it, and that only works half the time.. Any ideas on how to fix this?

  6. #166
    What's Jailbreak? aboudiiiiii's Avatar
    Join Date
    Jul 2008
    Location
    Dearborn, MI
    Posts
    29
    Thanks
    14
    Thanked 1 Time in 1 Post
    Default It sucks!
    Quickpwn 2.1 sucks! It doesn't give the ability to do a wipe all date. I installed customize and it still recognize all my previous packages in terms of themes and other stuff, but can't use'em, uninstall'em, or reinstall'em. Can't wait for winpwn

  7. #167
    im gonna go back to 2.0.2 and then do the upgrade selection in itunes.

    This is not making any sense to me. its not working.

    wtf?

    so if i upgrade to 2.1, then quickpwn and JB my 2g iphone, i then plug it into my computer and hit restore to backup...

    it acts like its going to work and then i get the apple logo, get all excited thinking it will work, and then BAMM!!! i get the loading circle thing and it sits there and vibrates every few seconds (and let me tell ya thats freaking annoying)

    How do i get my restore on there? i need some of the contacts that are on the restore that arent on the sim card.

    Thanks


    p.s. If my restore is not compatible with the iphone... how do i fix it? i need those contacts....

    i can unlock the phone and use my sim card, i just cant do a restore on it. im not sure about syncing either but i will give it a shot.

    someone please help.
    Last edited by Kluak; 2008-09-20 at 06:47 PM.

  8. #168
    I used quickpwn 2.1 on a 2Generation iPhone and it unlocked but didn't jailbreak so the phone now has on its screen the following message: Different SIM detected; please connect to itunes.
    Any suggestions on how to rectify this? Thanks in advance

  9. #169
    Quote Originally Posted by ronnz View Post
    I used quickpwn 2.1 on a 2Generation iPhone and it unlocked but didn't jailbreak so the phone now has on its screen the following message: Different SIM detected; please connect to itunes.
    Any suggestions on how to rectify this? Thanks in advance
    you should probably just restore it (unless youre wanting to keep your apps then follow the guide)

    put it in DFU mode and restore it in itunes then re quickpwn it and do the jailbreak and it should work for you.

    you'll have to get bootneutor from cydia to unlock it and everything should work out just fine.
    Last edited by Kluak; 2008-09-20 at 07:46 PM.

  10. #170
    Quote Originally Posted by Mozzy View Post
    Just A Quick Reply Please ...
    Does The Quickpwn Activate The 3G iPhone..?
    As, I Dont Want To Install iTune 8.0 ...!!
    If your iphone is activated now, it will be activated after quickpwn, however if you want to run 2.1, you will need itunes 8.0.

  11. #171
    Quote Originally Posted by cpjr View Post
    If your iphone is activated now, it will be activated after quickpwn, however if you want to run 2.1, you will need itunes 8.0.
    odd thing was, i got a choice to download and install 2.1 when i was on itunes 7.7 o-o.

  12. #172
    I downloaded, installed and jailbroke my iPhone in under 15 minutes. It's a great day!

    Thanks to cpjr and the dev team!

    Now lets see what apps are compatible

    P.S. the GUI is waaaaay better than what i used for 2.0.2. I swear my 8 year old son could do it.
    Last edited by evolutionarymc; 2008-09-20 at 09:29 PM. Reason: Automerged Doublepost
    I would have my URL here so you could hear our music but apparently that's sig spam. WTF?

  13. #173
    iPhone? More like MyPhone mastuul's Avatar
    Join Date
    Sep 2008
    Location
    Big D
    Posts
    100
    Thanks
    9
    Thanked 7 Times in 4 Posts

    Been waiting since last weekend for this and it works great! I was on a jailbroke and unlocked phone w/2.0.2 firmware. Here's what I did.

    Synced my phone, updated to firmware 2.1 from 2.0.2 on iTunes (it kept it's unlock afterwards!), ran Quickpwn 2.1 without a custom firmware, opened Cydia, installed AptBackup, opened AptBackup, pressed "restore" (you need to have had it on your phone and have "backedup" your apps prior to updating for it to work), and all my Cydia apps were back and working. Thank you Dev Team!

  14. #174
    its not working for me at all..
    when i unzip the file and try to open it it gives me back an error... it says the application failed to initialize properly (0xc0000135)
    can anyone help me please??????????
    (i dont have vista)
    Like what I said? Hit the Thanks button!!!

  15. #175
    Ok so I have pwned my phone but for some reason my default boot logos are displaying. Everything else is working fine (JBroken and everything, I already made a lot of changes to my phone) but is there a way to change the boot logos without having to do a restore from iTunes? I thought i selected them to be changed to the pinapple and cartoon pic of steve jobs but I still have the apple and itunes/cord logo?

    Thanks

  16. #176
    WOW.. this was so fast and easy.. if your having problems with this... then... ummm.. wow i really dont know what to say..

  17. #177
    quickpwnd with already updated 2.1, went without a hitch, works perfectly. Kudos!

  18. #178
    Quote Originally Posted by bebex View Post
    its not working for me at all..
    when i unzip the file and try to open it it gives me back an error... it says the application failed to initialize properly (0xc0000135)
    can anyone help me please??????????
    (i dont have vista)
    I am assuming your speaking of the "Quickpwn.exe" file, I would try re-downloading it, maybe you get a bad copy.

  19. #179
    Previously Known as A.T MetallicaFan1991's Avatar
    Join Date
    Apr 2008
    Location
    Manchester, UK
    Posts
    1,584
    Thanks
    188
    Thanked 111 Times in 94 Posts

    Quote Originally Posted by ThinkTank View Post
    Either someone is getting paid for it not to come out or we need to beg the Dev and Zibiri to work together. They are all stuck.
    Actually I know a Canadian guy who has a software unlock for his iPhone 3G but he's not going to make it public, personal use only.

    His iPhone 3G will only work on Rogers but when he uses the software on the 3G, it accepts any sim, he has to use the software every time the iPhone 3G gets updated as it gets locked to Rogers.

    So there is a software unlock for 3G but the Dev Team haven't found it. Geohot will be the only one out of zibri, dev team and himself to figure out the 3G unlock. He unlocked the first iPhone, fw 1.1.2 and a way to downgrade the bootloader to 3.9 and he probably will be the first to release an unlock for 3G.

    MBP 15" 2.66Ghz Core 2 Duo Nvidia 9400M 9600GT 256MB OS X 10.6.4 Windows 7 June 2009
    iPhone 4 August 28th

  20. #180
    Thanks!!!!!!!!11

Page 9 of 17 FirstFirst ... 7891011 ... LastLast
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •