Page 7 of 18 FirstFirst ... 5678917 ... LastLast
Results 121 to 140 of 345

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: Unlock OTB 1.1.2 and 1.1.3 via Installer

  1. #121
    Quote Originally Posted by gferreira View Post
    I know I've said this before but I'll repeat...
    My problem is that as soon as option/shift click on restore and choose the firmware 1.1.1 to it to restore, either on windows or mac, before restoring to the 1.1.1 firmware (downgrading) it gives me an error message...

    It's not the error message at the end, which should be ignored... I'm not that dumb *lol*...

    It doesn't even start downgrading...

    tryed dowloading the firmware again, tryed with other firmwares (1.0.2, 1.1.2) but all it allows me to is restore when I choose the 1.1.3 firmware, which is not quite usefull

    The error message is "The iPhone "iPhone" could not be restored. An unknow error occurred (2001)."
    gferreira, I have exactly the same problem. It says extracting files (firmare 1.1.1 or 1.1.2) and immediately after gives me an unknown error. I have tried all firmaware versions and the only one it accepts is 1.1.3. Did you try downgrading using the latest version of Itunes? I was about to do that. This is so very frustrating. I hope we find a solution. Any help out there would be appreciated. Many thanks

  2. #122
    So with this method, I can jailbreak an OTB 1.1.3 iPhone and have phone functionality?

  3. #123
    Quote Originally Posted by shugni View Post
    gferreira, I have exactly the same problem. It says extracting files (firmare 1.1.1 or 1.1.2) and immediately after gives me an unknown error. I have tried all firmaware versions and the only one it accepts is 1.1.3. Did you try downgrading using the latest version of Itunes? I was about to do that. This is so very frustrating. I hope we find a solution. Any help out there would be appreciated. Many thanks
    I tryed it with both iTunes 7.5 and 7.6 in a mac
    and with itunes 7.6 on windows (running under parallels on my mac)..

    still no luck

  4. #124
    Hey this is the way I did to down grade it connect your phone to the mac or pc after it popsup on iTunes hold the top button and the home button till it shuts off once you see it disappear from iTunes let go of the top button but still hold the home button after a while iTunes will say iPhone in recovery or something like that now if you look at the phone the screen is black now click on recover select the firmware 1.1.1 when it updates it will give you an error15 but this time the phone shows the connect phone to iTunes follow the steps from above but don't do holding buttons to shut off part just the recovery part. Now again you will get the error15 just use ibrike to get out of recovery or independence to get out of recovery now you have 1.1.1 you will get a massage saying invalid sim card this is normal untill you get to1.1.3

  5. #125
    Quote Originally Posted by xxdanielxx View Post
    Hey this is the way I did to down grade it connect your phone to the mac or pc after it popsup on iTunes hold the top button and the home button till it shuts off once you see it disappear from iTunes let go of the top button but still hold the home button after a while iTunes will say iPhone in recovery or something like that now if you look at the phone the screen is black now click on recover select the firmware 1.1.1 when it updates it will give you an error15 but this time the phone shows the connect phone to iTunes follow the steps from above but don't do holding buttons to shut off part just the recovery part. Now again you will get the error15 just use ibrike to get out of recovery or independence to get out of recovery now you have 1.1.1 you will get a massage saying invalid sim card this is normal untill you get to1.1.3
    Daniel, thanks for trying to help but as I said in a previous message I'm not that dumb *LOL*
    I read the instructions I know that AT THE END there will be a error message...

    But we are getting an error message BEFORE restoring/recovery

  6. #126
    to downgrade from 1.1.3 you HAVE TO be on a PC..i tried a million different times with my mac in the past and no luck. tried once with my pc and it worked like a charm.
    The Future of Mobile

    http://www.mobitureblog.com

  7. #127
    Quote Originally Posted by gferreira View Post
    Daniel, thanks for trying to help but as I said in a previous message I'm not that dumb *LOL*
    I read the instructions I know that AT THE END there will be a error message...

    But we are getting an error message BEFORE restoring/recovery
    Can you please read it again sorry if I said it wrong look at the first part you have to pit it in a special recovery mode try then post please thanks

  8. #128
    so i have a 8GB iphone on tmobile with 1.1.3 firmware and baseband and 3.9 bootloader.

    i kinda want a 16GB..does anysim 1.3 work with a 1.1.3 OTB?
    and once you do geohots unlock can you upgrade the baseband to 1.1.3 baseband with baseband upgrader??
    The Future of Mobile

    http://www.mobitureblog.com

  9. #129
    Quote Originally Posted by xxdanielxx View Post
    Can you please read it again sorry if I said it wrong look at the first part you have to pit it in a special recovery mode try then post please thanks

    I already did the home + power buttom... this is called DFU mode

    Quote Originally Posted by ryan christopher View Post
    to downgrade from 1.1.3 you HAVE TO be on a PC..i tried a million different times with my mac in the past and no luck. tried once with my pc and it worked like a charm.
    HAVE to be a PC?
    coz I'm trying on windows under Parallels and it's not working either :s

    I'll try on a PC tomorrow...
    Last edited by gferreira; 2008-02-09 at 07:36 AM. Reason: Automerged Doublepost

  10. #130
    I have an OTB 1.1.3 iPhone with bootloader 4.6, how can i jailbreak it and maintain iphone functionality? I am under the impression from this post that it is possible

  11. #131
    okay when you do the DFU mode is your screen completely black but still recognized on itunes?

    what i did was hold the sleep button and home button and look at my phone recognized on itunes. as soon as the phone disappeared off the screen let go of the sleep button and continue to hold the home button until the phone is recognized in itunes again. if the connect to itunes logo is on then try again. keep trying until you have a phone with a black screen that is recognized in itunes
    The Future of Mobile

    http://www.mobitureblog.com

  12. The Following 2 Users Say Thank You to ryan christopher For This Useful Post:

    gferreira (2008-02-09), shugni (2008-02-09)

  13. #132
    Quote Originally Posted by ryan christopher View Post
    okay when you do the DFU mode is your screen completely black but still recognized on itunes?

    what i did was hold the sleep button and home button and look at my phone recognized on itunes. as soon as the phone disappeared off the screen let go of the sleep button and continue to hold the home button until the phone is recognized in itunes again. if the connect to itunes logo is on then try again. keep trying until you have a phone with a black screen that is recognized in itunes
    black screen? never seen that

    i'm getting the connect to itunes screen with cable and itunes logo

    still... nothing I do lead me to black screen :s
    Last edited by gferreira; 2008-02-09 at 07:47 AM. Reason: DFU

  14. #133
    After reading all these posts I am still confused. I am currently running a jailbreaked 1.1.2 iPhone with a firmware of 04.02.13_G (Bootloader 4.6). If I want to upgrade to 1.1.3 do I need to upgrade my firmware to 04.03.13_G and if so how? I tried running the 1.1.2-1.1.3 OTB G-Unlock but that said I had to be on 1.1.1. Ultimately what I want to do is upgrade to 1.1.3 and be on the latest firmware, so that I can get the google map locator to work.

  15. #134
    Has eveyone try on the software unlock 1.1.2 OTB provided by http://www.iphoneunlockuk.com
    They offer at 39.99 for a license....
    Do you think is it worth to buy?

  16. #135
    Quote Originally Posted by ryan christopher View Post
    okay when you do the DFU mode is your screen completely black but still recognized on itunes?

    what i did was hold the sleep button and home button and look at my phone recognized on itunes. as soon as the phone disappeared off the screen let go of the sleep button and continue to hold the home button until the phone is recognized in itunes again. if the connect to itunes logo is on then try again. keep trying until you have a phone with a black screen that is recognized in itunes
    Ryan, you are a star.... many thanks... Tried it until the screen went black and it is now restoring to 1.1.1. Thank you!!

  17. #136
    iPhone? More like MyPhone sLevin1fo's Avatar
    Join Date
    Sep 2007
    Location
    F**K YOU, IM FROM TEXAS (So Original, HUH?)
    Posts
    104
    Thanks
    16
    Thanked 5 Times in 5 Posts

    WOW. I see you guys have come a long way. I haven't been to MMi in a while. I had to cancel atnt. Sold the iPhone. Im no longer a Modder. I am now a Stacker! Ha!

    Thanks for everything guys. I killed a lot of hours because of this page. I screwed up my phones so many times. In the end it was priceless!

    Viva La iPhone!
    8GB 2G 1.0.2v 3.14.08_G AT&T RIP
    16GB 3G 2.0.2v 2.02.01 AT&T RIP
    8GB 3G 3.0 04.26.08 AT&T RIP
    16GB 3GS 3.0.1 04.26.08 AT&T RIP
    16GB 3GS 3.1.3 5.12.01 AT&T RIP
    16GB iPhone4 3.10.01 4.2.1 Fancy iPod



  18. #137
    iPhone? More like MyPhone rvlyssup's Avatar
    Join Date
    Jun 2007
    Location
    Just outside of Los Angeles...
    Posts
    138
    Thanks
    12
    Thanked 14 Times in 14 Posts

    This is what I did to jailbreak and unlock my OTB 1.1.2, updated to 1.1.3 via version 7.6 itunes, week 51, 4.6 bootloader, and 4.03.13 baseband 8GB iPhone.
    *Please note that tutorial will indicate that you will loose phone functionality if you have the 4.6 bootloader. Don't worry cuz there is a solution*

    I. (For 4.6 BL only) Go to the link below and follow steps 1 and 2. Read the instructions, it tells you everything.

    http://www.hackthatphone.com/113/iph...grade_113.html

    It tells you how to download to firmware 1.1.1, errors you will encounter, and how to recover from it. Skip steps 3 and 4, that is for iPhones with the 3.9 bootloader only. 4.6 BL will NOT allow you to downgrade your baseband.

    II. Next, upgrade to 1.1.2. Follow the following steps.

    On a 1.1.1 phone, open Installer and install OktoPrep located in the Tweaks 1.1.1 category.

    Download the 1.1.2 firmware file from Apple: iPhone1,1_1.1.2_3B48b_Restore.ipsw (right click link and save target)

    Connect your phone to your computer and open iTunes on the "summary" page.

    Hold down the SHIFT key (Windows) or Option/ALT-key (Mac) on your keyboard while clicking on the Upgrade button (not the restore button!). A file browsing dialog should appear, and you must select the firmware file you downloaded in the previous step.

    While the phone is upgrading, download the 1.1.2 jailbreak archive and extract the files to your computer.

    If you don't already have Java on your computer, you need to download and install Java runtime first. If you are unsure, check the jailbreak.jar file in the archive you extracted previously - it should have an icon with a coffee cup

    *If you get the error 1015 message putting the phone in recovery mode, just run iBrick Classic, follow the prompts and your good to go.*

    When your phone is done upgrading, and shows the Slide for emergency screen, you need to launch the jailbreak java application on your computer. Windows users double click on the windows.bat file, while Mac users can double click on jailbreak.jar file.

    An application should appear, with a "Jailbreak" button - click on it and wait while it's jailbreaking. This will take a few minutes, and your phone will restart a few times at the end.

    Your phone should now show "Slide to unlock" instead of emergency. If it does, everything was successfull.

    III. Upgrading to a Jailbroken 1.1.3 firmware.

    This requires that you already have jailbroken 1.1.2 iPhone. Open Installer, and Install Official 1.1.3 Upgrader found in the System category. This will download the entire 165MB firmware over Wi-Fi, patch it, and upgrade your phone automatically. So it may take some time - normally 10-30 minutes. When done your phone should reboot directly to a jailbroken 1.1.3firmware.

    IV. The following are added steps if you have no cellular service after the upgrade to a Jailbroken iPhone with 1.1.3 Firmware.

    *If you're an AT&T/O2/etc. customer then you've probably noticed that you aren't connected to your cellular network. To fix this, there's just a few more steps left (and you'll need that wireless network again.)

    Post-jailbreaking - Restoring your phone service in 1.1.3

    Download the following file, and place it on your Desktop:
    Original /usr/libexec/lockdownd file
    On your iPhone, go to Installer.app and install the "BSD Subsystem" and "OpenSSH" packages if they are not already installed.
    Open up your iPhone settings and join your wireless network. Once you have joined, click the blue arrow next to your network and write down your IP Address.
    If you are a Mac OS X user...
    On a Mac connected to the same wireless network, open up Terminal and type in the following commands:
    "chmod +x ~/Desktop/lockdownd"
    "scp ~/Desktop/lockdownd [email protected]<IPADDRESS>:/usr/libexec" where <IPADDRESS> is the IP Address of your iPhone (minus the curved brackets) that you just wrote down. When it asks for a password, type in "alpine" and press Enter (nothing will appear as your type in the password - this is normal).
    Note: If your computer complains about something having to do with a known_hosts file (you'll see "@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @"), run the command "rm ~/.ssh/known_hosts" and try the 'scp' line again.
    If you are a Windows user...
    You must be on a PC connected to the same wireless network as your iPhone. Download this file and save it to your Desktop (if you haven't already):
    PCSP for Windows (by the maker of PuTTY)
    PuTTY for Windows (SSH Client)
    Now open a command window by going to your Start menu, clicking Run, and typing in 'cmd'.
    Type the following commands:
    "cd desktop"
    "pscp lockdownd [email protected]<IPADDRESS>:/usr/libexec" where <IPADDRESS> is the IP Address of your iPhone (minus the curved brackets) that you just wrote down. When it asks for a password, type in "alpine" and press Enter.
    "putty -ssh [email protected]<IPADDRESS>" with same <IPADDRESS> replacement and password as above
    "chmod +x /usr/libexec/lockdownd"

    Restart your iPhone by holding down the top Sleep/Wake button and sliding the red slider. When the phone restarts, you should have a 1.1.3 iPhone that is jailbroken and with your cellular service working.

    *And many THANKS to the following sources in helping me with my iPhone which I though was unlockable. They also contain links for firmware, tools, applications, etc.*

    http://iphone.unlock.no/#how-to-down...1.1.2-or-1.1.3
    http://theidoctor.blogspot.com/2008/...3-iphones.html
    http://guides.macrumors.com/Jailbrea...ating_to_1.1.3

    Once in Installer, go to Sources and refresh the page. (Just in case the package list has not yet updated) You will see "GeoHotz' 1.1.2 / 1.1.3 OTB iPhone Unlock". Just install, sit back, and enjoy an unlocked 4.6 B.L iPhone.

    ****PLEASE FOLLOW INSTRUCTIONS, THIS IS NOT FOR 3.9 BOOTLOADER iPHONES! BBiNFO SHOWED 4.03.13 BEFORE I USED THE UNLOCKER. IT NOW SHOWS 4.02.13 AND I DID NOT ENCOUNTER ANY ERROR MESSAGES OR FAILED INSTALLATION. YOU ARE ALSO DOING THIS AT YOUR OWN RISK. NO ONE IS HELD RESPONSIBLE EXCEPT THE USER OF THESE GUIDES!****
    Last edited by rvlyssup; 2008-02-09 at 08:41 AM. Reason: spelling

  19. #138
    Quote Originally Posted by gferreira View Post
    black screen? never seen that

    i'm getting the connect to itunes screen with cable and itunes logo

    still... nothing I do lead me to black screen :s
    look at your phone on the itunes screen.
    now hold the sleep/wake button and home button down.
    release the sleep/wake button AS SOON AS the phone disappears from your computer screen and keep holding the home button.
    hold it till itunes recognizes your phone.

    if your have the connect to itunes logo keep trying this step over till you get a black screen. its kinda tricky and all about timing but you will get it
    The Future of Mobile

    http://www.mobitureblog.com

  20. #139
    I recommend you guys to try this:

    http://www.iclarified.com/entry/index.php?enid=649

    That's all I did to my iPhone and now I have a wonderful 1.1.2 OTB unlocked!

    good bye stealthsim

    Cheers!

  21. #140
    iPhoneaholic
    Join Date
    Sep 2007
    Location
    Australia
    Posts
    353
    Thanks
    3
    Thanked 48 Times in 38 Posts

    Quote Originally Posted by ryan christopher View Post
    to downgrade from 1.1.3 you HAVE TO be on a PC..i tried a million different times with my mac in the past and no luck. tried once with my pc and it worked like a charm.
    No... you do not have to be on a PC. There are a ton of guides for downgrading 1.1.3 from a Mac. I've done so twice using a mac. Try: http://www.google.com/search?q=1.1.3...ient=firefox-a

    Quote Originally Posted by wgooi2332 View Post
    Has eveyone try on the software unlock 1.1.2 OTB provided by http://www.iphoneunlockuk.com
    They offer at 39.99 for a license....
    Do you think is it worth to buy?
    $39.95??? This thread is a about a FREE unlock. So of course it's not worth it. They are trying to simply rip you off. What makes it worse is they are taking the work done by other, given to the community for free... and then making a profit from it. Bottom feeders...
    Last edited by imode; 2008-02-09 at 08:13 AM. Reason: Automerged Doublepost

Page 7 of 18 FirstFirst ... 5678917 ... LastLast
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •