Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: [WIN] Install Custom 3.0 FW without downgrading on unjb iPhone

  1. #1
    Default [WIN] Install Custom 3.0 FW without downgrading on unjb iPhone
    Tested with iPhone 3g, Iphone 2g, IPOD Touch 1G

    IF YOU HAVE A CUSTOM FW ALREADY ACTIVATED THIS WILL WORK FOR YOU AS WELL. ON OTHER FORUM A GUY WITH TMOBILE POSTED IT WORKED FOR HIM.

    NO NEED TO DOWNGRADE

    Here is what you need:

    Itunes 8.2


    WinPwn 2.5
    http://rapidshare.com/files/14160704...Setup.zip.html

    iPhone 2.0 FW
    http://appldnld.apple.com.edgesuite....7_Restore.ipsw
    Make sure 2.0 fw is in My Documents

    THANKS TO SMCRACK
    iPhone Custom IPSW

    iPhone 3G
    iPhone 3G.

    Restore has:
    595MB Partition Size
    OpenSSH installed
    SBSettings Installed

    Does NOT have:
    ICY installed. If you want it, just go into Cydia and install it from there.
    There are no custom Boot images


    This firmware will not activate your phone. You have to be a legit ATT user for this firmware

    http://www.megaupload.com/?d=BT9WRLFI
    iPhone 2g
    iPhone 2G.

    It only has Cydia installed. If you want Icy, download it via Cydia.

    Also, this WILL NOT activate or unlock your iPhone. This is only for valid ATT users...
    (im making one that unlocks and activates right now so hold tight if you want that)

    NOTE:
    Have not tested this bc I have an iPhone 3G. Use at own risk

    Make sure your device is already pwned or it will not work.

    http://www.megaupload.com/?d=QDMAGWGC
    iPhone 2G will UNLOCK AND ACTIVATE
    iPhone 2G that will UNLOCK AND ACTIVATE your iPhone2G

    It only has Cydia installed. If you want Icy, download it via Cydia.

    NOTE:
    Have not tested this bc I have an iPhone 3G. Use at own risk

    Make sure your device is already pwned or it will not work.

    http://www.megaupload.com/?d=DHDTBXX0
    iPod Touch 1G
    iPod Touch 1G.

    It has a 1gb root partition size

    Cydia is installed (for Icy, install via cydia)

    http://www.megaupload.com/?d=83P0F4NP
    Step by Step:

    1) Open WinPwn 2.5 make sure you see the Pineapple button at the 3rd button from the top right.

    2) Click the switch to turn Expert on.

    3) Select iPhone 3g

    4) Select 2.0 and click next

    5) Click any up or down thumbs you want it doesnt matter at all.

    6) It will take a few minutes to go through the process. Once you get through everything and get to the DFU portion follow the prompts as it says. Once you put it into DFU and it starts doing its thing again your iPhone screen will turn white. ONCE YOUR SCREEN TURNS WHITE close WinPwn.
    *ONCE YOUR SCREEN TURNS WHITE CLOSE WINPWN

    7) Open up iTunes 8.2 then hold down shift and click restore. Select the CFW and it will do it's thing.

    8) Once it is done leave it plugged in until itunes activates it then unplug and enjoy your jailbroken iPhone!
    Last edited by jivy26; 2009-06-20 at 07:43 PM. Reason: updated to link to ipsw's

  2. The Following 9 Users Say Thank You to jivy26 For This Useful Post:

    bazzazz (2009-06-20), chazrt (2009-06-20), dauidus (2009-06-20), derekthered (2009-06-20), Kiserai (2009-06-20), raafa171 (2009-06-20), TheSoup (2009-06-20), Tyman07 (2009-06-20), wallnutz04 (2009-06-20)

  3. #2
    thanks a bunch bro!
    this is a perfect solution for someone with no mac!

    YOUR FREAKING ROCK

  4. #3
    Retired Moderator stlcaddie's Avatar
    Join Date
    Jul 2007
    Location
    Saint Louis, MO
    Posts
    1,088
    Thanks
    140
    Thanked 128 Times in 90 Posts

    Great find my lil homie, bout to test it out after I get off the shittr. LOL

  5. #4
    It works! I used a different unlocked and activated firmware and we have it running t-mobile!

  6. The Following User Says Thank You to Goallie11 For This Useful Post:

    Kiserai (2009-06-20)

  7. #5

  8. #6
    Can you post a link to that activated fw for me so I can link to it thx

  9. The Following User Says Thank You to jivy26 For This Useful Post:

    wallnutz04 (2009-06-20)

  10. #7
    Hey, thanks for the find!

    Uhm, sorry to be picky but does that CFW have those weird bootlogos? Because I don't want them...

    And just to make sure, does doing this have the exact same result as of doing it with QuickPwn?

    Thanks,

  11. #8
    What's Jailbreak?
    Join Date
    Jun 2009
    Location
    N.Y.
    Posts
    12
    Thanks
    8
    Thanked 1 Time in 1 Post
    jivy it works so far thanks for the help its such a good idea like swap magic for iphone FW

    ice no boot logos and so far it looks the same as w/ quickpwn
    Last edited by wallnutz04; 2009-06-20 at 07:50 AM. Reason: Automerged Doublepost

  12. The Following User Says Thank You to wallnutz04 For This Useful Post:

    Iceflame9 (2009-06-20)

  13. #9
    iPhoneaholic theone77's Avatar
    Join Date
    Oct 2007
    Location
    PlaNeT Earth in the Middle Part
    Posts
    442
    Thanks
    47
    Thanked 276 Times in 112 Posts

    this is a CFW for 3G only where for 2g?
    DoNt ForGeT to Say "THanK You" using tHe THANKS ButToN if you found my post helpful

    Apple iPhoNe 3GS Factory Unlocked 3.1.2 All working flawlessly!!
    .

  14. #10
    Green Apple
    Join Date
    Oct 2008
    Location
    Spokane, WA
    Posts
    86
    Thanks
    39
    Thanked 10 Times in 7 Posts

    Quote Originally Posted by theone77 View Post
    this is a CFW for 3G only where for 2g?
    There are people trading 2g CFWs in other threads. You should be able to find somebody to help you there. Check the iPhone News threads.

  15. #11
    Thanks for the info! Just did it on my iphone3g and it worked perfect!

  16. #12
    I have to admit, I was more than a little skeptical...but it's almost finished flashing. You brought my lil 2G back from the brick!

  17. #13
    "This firmware
    will not activate your phone. You have to be a legit ATT user for this firmware"

    Is this custom Firmware specific to ATT only ? I reside in Australia and I am with optus which whom I am contracted to. Will this Custom firmware work for me?

  18. #14
    yes, it will work with you, or any other legit carrier
    i just finished doing it with optus prepaid, worked perfectly!

  19. The Following 2 Users Say Thank You to Trooper For This Useful Post:

    bazzazz (2009-06-20), Kiserai (2009-06-20)

  20. #15
    Green Apple
    Join Date
    Oct 2008
    Location
    Spokane, WA
    Posts
    86
    Thanks
    39
    Thanked 10 Times in 7 Posts

    Worked for me too. Maybe it's just me but the process for entering DFU seemed a bit different than QuickPwn. Like, the button presses and holds were different. Could just be my imagination though.

    But yeah, worked for me on AT&T just fine. Updating Cydia now.

  21. #16
    Works for me! Good stuff. Thanks

  22. #17
    Quote Originally Posted by Trooper View Post
    yes, it will work with you, or any other legit carrier
    i just finished doing it with optus prepaid, worked perfectly!
    Just Finished installing - worked perfectly on Optus for me also ! thx to all the Guru's ... for this brilliant work .

  23. #18
    would i lose my contacts through this?

  24. #19
    Quote Originally Posted by kvp1192 View Post
    would i lose my contacts through this?
    As long as you sync before hand to back up your phone and then restore from that when you are finished you will have everything you had before back on your phone. Except the cydia apps, you have to reinstall those.

  25. #20
    i have put the 2.0 fw in my docs but the ipsw fle isnt there after extracting and i cant locate it manualy. what am i doing wrong guys

    thanks danny

    edit- sorted, just renamed the .zip file to .ipsw
    Last edited by woody565; 2009-06-20 at 11:10 AM.

Page 1 of 2 12 LastLast
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •