Results 1 to 16 of 16

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: "ERROR" After doing the AT+CLCK="PN",0,"00000000" command

  1. #1
    Default "ERROR" After doing the AT+CLCK="PN",0,"00000000" command
    help, it went through fine the first time, then I restored my phone and I am trying to do it again and I am getting error after the AT+CLCK="PN",0,"00000000" command I have exited out of minicom and back in but same issue

  2. #2
    Yeah, same problem for me

  3. #3
    1) all you have to do is restore your iphone
    2) complete process again
    3) type AT+CLCK="PN",0,"00000000" command (note you will still get error)
    4) follow by AT+CLCK="PN",2 command
    5) exit minicom and run the disable baseband command
    6) run bbupdater -v
    7) for last (enable the baseband)
    8) your UNLOCKED!!! enjoy

  4. #4
    Quote Originally Posted by zoelis22 View Post
    1) all you have to do is restore your iphone
    2) complete process again
    3) type AT+CLCK="PN",0,"00000000" command (note you will still get error)
    4) follow by AT+CLCK="PN",2 command
    5) exit minicom and run the disable baseband command
    baseband is already down if you had get into minicom.

    Quote Originally Posted by zoelis22 View Post
    6) run bbupdater -v
    7) for last (enable the baseband)
    8) your UNLOCKED!!! enjoy
    Nothing to do. phone doesn't work.

  5. #5
    Quote Originally Posted by RANE2001 View Post
    help, it went through fine the first time, then I restored my phone and I am trying to do it again and I am getting error after the AT+CLCK="PN",0,"00000000" command I have exited out of minicom and back in but same issue

    i have gotten that a couple times. easiest way i found was to back out of the wifi settings on the phone once you get the ip address , but honestly it doesnt affect the phone if you run the last at command and you get 0

  6. #6
    same issue here.

    second command shows: 0, but SIM is still Locked.

    Any ideas?

    iphone is already restored ...

    1.02

    my minicom output:

    AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
    OK
    AT
    OK
    AT+CLCK="PN",0,"00000000"
    ERROR
    AT+CLCK="PN",2
    +CLCK: 0

    OK

    But SIM is still locked....
    Last edited by madman1234; 2007-09-19 at 08:39 AM. Reason: Automerged Doublepost

  7. #7
    make sure you run the load command at the end. and when you run minicom make sure your screens on home

  8. #8
    I ran into the same problem.

    I ran the iunlock once. Still Locked. got the error after the 1st command in minicom.
    I restored and ran the iunlock again. Still Locked. got the erro after the 1st command in minicom.
    I proceeded on with the rest of the process and performed a restart. The phone unlocked after that.

  9. #9
    Livin the iPhone Life SundayDuffer's Avatar
    Join Date
    Aug 2007
    Location
    Northern California
    Posts
    1,503
    Thanks
    32
    Thanked 181 Times in 164 Posts

    You could also just start minicom with "minicom -s" and change serial port from "/dev/modem to "/dev/tty.baseband" manually...then exit.
    Continue on with the process...you should finished with the 1 instead of 0.

    AT+CLCK="PN",0,"00000000"
    OK
    AT+CLCK="PN",2
    +CLCK: 1

    You're done..it is now unlocked. I did it last night.

  10. #10
    Quote Originally Posted by SundayDuffer View Post
    AT+CLCK="PN",2
    +CLCK: 1
    You're done..it is now unlocked..
    +CLCK:1 means iPhone is locked, not unlocked.

  11. #11
    Livin the iPhone Life SundayDuffer's Avatar
    Join Date
    Aug 2007
    Location
    Northern California
    Posts
    1,503
    Thanks
    32
    Thanked 181 Times in 164 Posts

    Quote Originally Posted by MuscleNerd View Post
    +CLCK:1 means iPhone is locked, not unlocked.
    hmmm...that's weird...I did that last night with a friend..after that, he popped in his TMobile, and voilaaaa it worked.

  12. #12
    the minicom config file set it automaticly to tty.baseband.

    I was in my home Screen, but the same error.

    It is very frustrating, because I am only one step away from having a unlocked iphone.

    I would like to use it with vodafone germany......

    Please advice.

    I guess my problems are caused by anySIM, which did not work the first time. Then there came the error message, can
    't locate bytes for patch...

    Thanks!

  13. #13
    I get that same error with anysim and now everytime I "unlock" the iphone i just got the no service signal.

    please help

  14. #14
    I finally tried this and it worked

    ---snip
    http://smxy.org/iphone-apps/info/Unlock.html
    ---snip

    -Madman

  15. #15
    1) all you have to do is restore your iphone
    2) complete process again
    3) type AT+CLCK="PN",0,"00000000" command (note you will still get error)
    4) follow by AT+CLCK="PN",2 command
    5) exit minicom and run the disable baseband command
    6) run bbupdater -v
    7) for last (enable the baseband)
    8) your UNLOCKED!!! enjoy


    I'm stuck on #5. I'm on Windows XP and using PuTTY. Do you disable baseband on PuTTY when you exit minicom and what is the exact command you type to disable baseband?

  16. #16
    You need to download the older version of anysims (1.0) as a pxl file. then use ibrickr and choose install pxl the choose anysims. works great!! it took me 9 hours straight to get my phone back to normal. I was getting the "CLCK 1 error.

    Hope it helps
    Last edited by kapril1905; 2007-10-18 at 10:41 AM.

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •