Page 8 of 17 FirstFirst ... 678910 ... LastLast
Results 141 to 160 of 327

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: [GUIDE] Jailbreak 1.1.3 for AT&T Users

  1. #141
    Quote Originally Posted by iPhoneHero View Post
    i did the whole thing flawlessly....but i have no signal at all. D:
    scrap it and start over?
    yeah, if it doesn't work, i'd say to just start over....it's a real pain, i know =/

    Quote Originally Posted by s14silvia View Post
    i saw the other post about base band and i still done understand the full concept, so what can i do to fix this? or should i just suck it up and upgrade to 1.1.3 legitly and do the whole process?
    s14,

    the baseband is basically what the phone uses to communicate with the outside world. Apple updated our phones with new 1.1.3 firmware and therefore the baseband was updated also, probably because of the new google maps "locate me" feature.

    when you upgrade to 1.1.3, you're updating your baseband to the 1.1.3 feature so that you can use the google maps feature. we first upgrade to 1.1.3 first so that we can update baseband first, and then downgrade to 1.1.1 so that we can hack the main software and jailbreak the phone all the way up to 1.1.3.

    hope that helped =)

    i got a problem of my own though guys.

    my edge works to make phone calls, but NONE of my edge internet functions work such as safari, weather, stocks, youtube, mail, etc.

    does anyone know what the fuk is going on that could cause all the internet stuff to not work but my phone and voicemail features still work? don't worry, i have the iphone data plan and i paid my bill =)
    Last edited by supershick; 2008-02-06 at 06:10 AM. Reason: Automerged Doublepost

  2. #142
    ok i installed the 1.1.1 and did the preping for 1.1.2 and installed 1.1.2 and try and jailbreak with windows bat and it says: This utility can only be used if you already run oktoprep before updating to 1.1.2. but i already did that after i installed 1.1.1 twice and jailbreaked it

    Please Help

  3. #143
    hey guys, got a problem of my own

    i jailbroke my phone to 1.1.3. my phone works but anything related to accessing data with my iphone doesn't work. my voice portion of edge works but my data portion doesn't.

    i've tried doing a reset of the network, i've tried to reset the phone, i've tried resetting the whole phone, but the data portion still doesn't work. i got the iphone data AND i've paid my bill. any thoughts guys?

  4. #144
    i have a big issue!!! i put my phone in recovery mode or whatevr hold down both power and home then releae power and so on ad so forth ten i got to downgrad to 1.1.1 it extracs software hen as soon as it does it says error (1) and does nothing at all! my iphone still show the plug to itunes picture and i have to unplug my iphone then plug it back in for itunes to recognize my phone and its the same over and over!!!! please help!!!!! wont let me downgrad!!!!

  5. #145
    iPhone? More like MyPhone techgirl's Avatar
    Join Date
    Jul 2007
    Location
    Newark, New Jersey
    Posts
    227
    Thanks
    30
    Thanked 15 Times in 10 Posts

    Hey Effextc - Add Error 9 to your list. That is the error for 1.1.3 otb downgrade to 1.1.1. (16gb specific? Unsure) But your guide is perfection. Thanks


    Techgirl at your service... Modding MyPhone since Day 1!

    AIM: lindseycholmes
    Skype: lindseycholmes
    Facebook: lindseycholmes


  6. #146
    Quote Originally Posted by gsxr600wheelin View Post
    i have a big issue!!! i put my phone in recovery mode or whatevr hold down both power and home then releae power and so on ad so forth ten i got to downgrad to 1.1.1 it extracs software hen as soon as it does it says error (1) and does nothing at all! my iphone still show the plug to itunes picture and i have to unplug my iphone then plug it back in for itunes to recognize my phone and its the same over and over!!!! please help!!!!! wont let me downgrad!!!!
    you gotta use ibrickr to boot up your phone. go to page 1 and download ibrickr 0.91 and boot your phone up for 1.1.1.

    make sure you restore twice as per the instructions.

  7. #147
    Quote Originally Posted by supershick View Post
    you gotta use ibrickr to boot up your phone. go to page 1 and download ibrickr 0.91 and boot your phone up for 1.1.1.

    make sure you restore twice as per the instructions.


    i do use ibrickr to reboot but i did it twice like u said and it still boots 1.1.3 !!!! ive read many thread and peeps are having the same problem not being able to put it on dfu mode! and i cant i get the cable and itunes picture!!!!

  8. #148
    Will this work on a 1.1.2 4.6 bootloader that was upgraded to 1.1.3?? Original at&t customer never jailbroken?

  9. #149
    I did the upgrade but one of my fav apps opens then just closes. iradio. Does anybody have this issue?
    HONDA PARTS SPECIALIST!!!

  10. #150
    Quote Originally Posted by dakko View Post
    Will this guide work if I use a AT&T sim card that does not have the legit activation that comes with a 2 yrs contract? IF I wanted to use the existing at&t plan that is not an iphone plan?

    If it does, the Hacktivation will activate the phone without getting the invalid sim card message?

    Thanks

    Great Guide!
    ive got the same exact question. anyone?

  11. #151
    Im on a 1.1.3 iPhone that i restored from 1.1.1
    Can i still use this method to hack my phone?
    And is there any way to downgrade back to 1.1.1?
    Can anyone send me a link or guide?

  12. #152
    I upgraded to 1.1.3 and now my iphone wont activate with itunes. It just gives me the slide for emergency screen and itunes will not activate my phone?!?!? I got uppgraded to 1.1.2 no problems and activatied but after the 1.1.3 it wont activate....any ideas? Thanks in advanced.
    ~Mike
    Last edited by lvballer06; 2008-02-06 at 06:26 PM.

  13. #153
    iPhone? More like MyPhone wgr73's Avatar
    Join Date
    Oct 2007
    Location
    Las Cruces, NM
    Posts
    106
    Thanks
    4
    Thanked 6 Times in 2 Posts

    Nice tut!! I do have another scenario...

    I'm an AT&T user and have a jailbroken 1.1.1 (moden firmware 4.01.13_G). Say I want to start from here instead of going up, then back down. Could I:

    1. Do the "oktoPrep"
    2. Upgrade to 1.1.2
    3. Jailbreak 1.1.2
    4. Install the BSD subsystem 2
    5. Use the installer for 1.1.3 and (*Say no the the hacktivation*) ?

    Would this work? I see no reason in doing more if I don't have to. I have a couple side questions:

    1. Would custom ringtones still work?
    2. Would my apps still work?
    3. Most importantly...would my contacts and SMS still be there? I have the sms.db backed up just in case. But I need my contacts(not sure if there is a file to backup).

    Thanks for your help! Again it looks like you have the best tutorial to date!

  14. #154
    Default wat is final Answer
    wat is the Final Answer for ATT Users Do we have to say Yes On Hachtivate Cus i have tried 3 times saying no to hacktivate . everytime when i jailbreak 1.1.3 everything goes gud but when i restart phone on 1.1.3 . screan comes on emergency call in french so any help will be so gr8 thnx

  15. #155
    Quote Originally Posted by usa_mostwanted007 View Post
    wat is the Final Answer for ATT Users Do we have to say Yes On Hachtivate Cus i have tried 3 times saying no to hacktivate . everytime when i jailbreak 1.1.3 everything goes gud but when i restart phone on 1.1.3 . screan comes on emergency call in french so any help will be so gr8 thnx
    Same here. I said no to hacktivate since it was already jailbroke and at 1.1.2. Thinking everything would be ok with my activation. But now I got 1.1.3 I think...no way to find out. Im stuck at emergency call.....and itunes throughs me a error when trying to activate. Help!!!
    ~Mike

  16. #156
    Default Will it work with the new 16GB version?
    I don't have an iPhone yet but am thinking I'll stick to AT&T and get a new 16GB version since the plans look about the same as I pay with T-Mobile already (I'm month-month with them now). Would I be able to put on any apps like GPS and such? Sorry if this sounds stupid... I'm a newbie here.

  17. #157
    i got to 1.1.1 went to jailbreakme.com and install appsnapp all it does is go to the slide for emergency screen.

    i've tried 5 times and yes i waited 10 mins before even touching it again still nothing.

    please help

    phone was a 1.1.2 not jailbroken then upgraded to 1.1.3 now this is where i'm at.
    if this post help click the thanks

  18. #158
    Default 1.1.3!
    Again, thanks for the guide.
    Did the entire process couple nights ago, and although I needed a few attempts, everything is up and running. Doesn't look like there are any issues for now.

    This is a great guide!

  19. #159
    For those of you having problems with you Phone rebooting into "Slide for Emergency" after doing the JB, just do it again and choose "YES" to lockdownd.

    Again, do NOT choose no, you will just reboot to "Slide for Emergency" again. Ive made the mistake about 3 times myself so I know.

  20. #160
    This is STUPID do not do this or you will end up with a junk phone or stuck on 1.1.3 with out anything but a phone... trust me it didnt work at all .. the jailbreak me thing didnt work at all... and wouldnt go back to a normal 1.1.1 .... when i did the jailbreakme.com it went to the page and i click on intall and it just took me back to the locked screen it wouldnt go any farther then that.
    Last edited by pdconner; 2008-02-07 at 02:50 AM.

Page 8 of 17 FirstFirst ... 678910 ... LastLast
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •