Results 1 to 10 of 10

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: otb 1.1.2 downgrade/jailbreak/activation/turbo sim / windows user guide

  1. #1
    iPhone? More like MyPhone blazingangel1986's Avatar
    Join Date
    Dec 2007
    Location
    Nassau, Bahamas
    Posts
    153
    Thanks
    4
    Thanked 13 Times in 10 Posts

    Default otb 1.1.2 downgrade/jailbreak/activation/turbo sim / windows user guide
    Windows-Version adopted and done by nikimere - with some little update by iMasoHOW TO JAILBREAK/ACTIVATE A 1.1.2 OTB (USA, Bootloader 4.6) and USE IT WITH TURBOSIM覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧-STEP 1 - DOWNGRADE YOUR 1.1.2 OTB to 1.1.11. download 1.1.1 firmware here:http://appldnld.apple.com.edgesuite.a_Restore.ipsw2. Connect your iPhone to your PC and do the following: press both, sleep and home button for 10 seconds, around the 8th second the screen will turn black, still hold the two buttons and the iPhone will turn back on. When it turns on, release the sleep button but still hold the home button until you see a screen with the cable. You are now in restore-mode. DO NOT unplug the iPhone3. start iTunes 7.5; iTunes will report that it found an iPhone in recovery mode; press the restore button WHILE holding the SHIFT-key; in the upcoming filechooser just choose the 1.1.1-firmware-file (iPhone1,1_1.1.1_3A109a_Restore.ipsw) you just downloaded; iTunes will now downgrade the iPhone to 1.1.1 (which may take a while) and then report the errorcode 1015 or 1011, which is not important and can be dismissed.4. shut down iTunesSTEP 1 - DONE!覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧-STEP 2 - JAILBREAK and ACTIVATION1. download iBrickr here:http://ibrickr.com/downloads/ibrickr_v0.91.zip2. Unzip it to a folder of your choice on your PC3. start iBrickr it will prompt you on how to get your phone out of recovery mode.4. (jailbreak) Assuming that you got the 殿ctivate screen close iTunes and slide to unlock to the emergency keypad, dial *#307#, the phone will ring, then press backspace to clear the numbers, then press 1, then dial, the phone will ring again, press answer, then press hold, the phone will ring again, press dismiss, then go to contacts, add 2 contacts, one is: name p and url prefs://1F and the other is name j and url http://jailbreakme.com, save them and go to contact p and click on prefs://1F, this will take to set up your Wi-Fi, make sure you are connected to Wi-Fi and press home button, this will take you to the 殿ctivate screen, slide to unlock, then dial 1, the phone will ring, answer and then press hold, it will ring again, then press dismiss, that will take you to contacts, select contact j and click on url http://jailbreakme.com. this will open the browser to AppSnapp Webapp site, just choose Install AppSnapp at the bottom of the site, safari wil crash and then you will have to wait about 2 minutes, the phone will restart and you have a jailbroken 1.1.1.5. on your iPhone click Installer and check if you are prompted to update the installer / if an update is available, if yes, just do so (after it is done click the home button and wait for the iPhone to do a soft reset then slide to unlock.), if no, proceed to next step.6. (oktoprep) Open iTunes, sync or setup if you have to and make sure you are on the main screen with update and restore buttons available. NOW on your phone click Installer (blue icon) and install Oktoprep, it is under Tweaks 1.1.1., and wait for it to say it is ok blah blah blah, then press home button and wait for a soft reset. (( do not restart phone ))7. (update to 1.1.2) On iTunes press UPDATE. it will update your phone to 1.1.2 without errors, wait for it to finish, a picture of a plug will appear on the iPhone and it will tell you to slide to unlock in Gibberish, on iTunes it will tell you, that you need iTunes 7.5 or higher to activate you phone.(do an UPDATE, NOT a restore! OF COURSE ONLY DO THIS WHEN IT IS 1.1.2 YOU ARE PROMPTED FOR! AS SOON AS APPLE RELEASES e.g. 1.1.3 or 1.2 or anything else HIGHER THAN 1.1.2, THIS STEP WONエT BE POSSIBLE ANYMORE! at least not this way.)8. shut down iTunes9. download and unpack this:http://conceitedsoftware.com/iphone/...ailbreak.zip10. open 屠ailbreak.jar (JAVA has to be installed) and wait til the process is finished, iPhone will reboot twice during this(if jailbreak.jar does not work, try windows.bat)STEP 2 - DONE! Your iPhone is now jailbroken and activated running 1.1.2覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧-STEP 3 - PREPARING and INSTALLING THE TURBOSIM1. on your iPhone, go to Settings -> General -> Auto Lock -> Never2. connect your iPhone to your WLAN (write down the IP your iPhone will have in your WLAN!) IMPORTANT: Only proceed further on in a WLAN-environment that will insure that the phone will retrieve the SAME IP via DHCP AGAIN AFTER THE NEXT REBOOT! Otherwise you will get stuck at STEP 3/15, cause the IP might have changed, e.g. in huge WLANs. If you are unsure then do this: on your iphone, after it acquires its IP address through DHCP, change the mode from DHCP to Static before you go on with the tutorial.3. on your iPhone, start the Installer and install the following: BSD Subsystem / CommunitySources / openSSH4. download and unzip these files to your PC:http://rapid_share.com/files/7197445...zip.html(maybe in the domainname there is a _ which needs to be removed.)5. download and open WinSCP (if you donエt have it already) here:http://winscp.net/download/winscp405setup.exe6. with WinSCP connect to your iPhone; Protocol: SFTP / Port:22 / Server: your iPhonesエ IP (see above) / Username: root / Password: alpine7. use WinSCP to copy the file 殿pplesaft.trb (from the folder turbosim_rev2) to the iPhone-folder /private/var/root8. use WinSCP to copy all OTHER files (except 殿pplesaft.trb) (from the folder turbosim_rev2) to the iPhone-folder /bin9. mark the copied files in the folder /bin, right-click them, select 撤roperties (or similar) and give them 0755-rights (owner: RWX / group: RX / others: RX)10. close WinSCP, then download PuTTy here:http://the.earth.li/~sgtatham/putty//x86/putty.exe11. cut out both SIMs, the original one supplied with the phone and your own, so they will fit perfectly into the TurboSim - do it carefully!12. put the original SIM supplied with the iPhone (not your own!) onto the TurboSim and carefully insert it into your iPhone13. start PuTTy and connect using your iPhone IP address as the host name.14. PuTTy should ask for a username, so type 途oot, then it asks for the root-password, which is 殿lpine - so type 殿lpine and hit Enter15. type 斗aunchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist16. type 鍍urbo-info and hit Enter - some numbers should appear (also maybe some 兎rror blah blah), but in the end finally followed by an 徹K. no errors17. type 鍍urbo-app /private/var/root/applesaft.trb - so the file you copied to that location via SFTP will now be executed; after that an 徹K should appear18. type 斗aunchctl load /System/Library/LaunchDaemons/com.apple.CommCenter.plist19. restart your iPhone20. on your iPhone go to Settings -> Phone -> SIM Applications -> Apple Saft -> Set -> Accept21. remove TurboSim and original SIM from the iPhone (carefully!)22. replace the original SIM with your own and put TurboSIM and your own SIM back into the iPhone (carefully!)23. restart your iPhoneSTEP 3 - DONE! Your iPhone should now be fully operational, Links: http://www.hackint0sh.org/forum/show...156#post134156

  2. The Following User Says Thank You to blazingangel1986 For This Useful Post:

    jhamster67 (2007-12-28)

  3. #2
    Retired Moderator DoerrFan's Avatar
    Join Date
    Jul 2007
    Location
    Boston
    Posts
    2,290
    Thanks
    143
    Thanked 461 Times in 229 Posts

    Nice guide.

  4. The Following User Says Thank You to DoerrFan For This Useful Post:

    blazingangel1986 (2007-12-28)

  5. #3
    can i still use this method if i have already activated my phone with at&t? What's the worst that could happen if I can't do it the right way?

  6. #4
    iPhone? More like MyPhone blazingangel1986's Avatar
    Join Date
    Dec 2007
    Location
    Nassau, Bahamas
    Posts
    153
    Thanks
    4
    Thanked 13 Times in 10 Posts

    If you already activated with at&t i think you may have to restore you phone so it asks to be activated so you can jail break and activate then unlock, or maybe you can just use ibricker it will ask to install a few files along the way but it should work im not sure, but if not me somebody else will have the answer here

  7. #5
    iPhone? More like MyPhone sLevin1fo's Avatar
    Join Date
    Sep 2007
    Location
    F**K YOU, IM FROM TEXAS (So Original, HUH?)
    Posts
    104
    Thanks
    16
    Thanked 5 Times in 5 Posts

    Hey the 1.1.1 restore file doesnt work. I havent been able to find it any where. I think Im going to start a thread. I need it.
    8GB 2G 1.0.2v 3.14.08_G AT&T RIP
    16GB 3G 2.0.2v 2.02.01 AT&T RIP
    8GB 3G 3.0 04.26.08 AT&T RIP
    16GB 3GS 3.0.1 04.26.08 AT&T RIP
    16GB 3GS 3.1.3 5.12.01 AT&T RIP
    16GB iPhone4 3.10.01 4.2.1 Fancy iPod



  8. The Following User Says Thank You to sLevin1fo For This Useful Post:

    blazingangel1986 (2007-12-29)

  9. #6
    iPhone? More like MyPhone blazingangel1986's Avatar
    Join Date
    Dec 2007
    Location
    Nassau, Bahamas
    Posts
    153
    Thanks
    4
    Thanked 13 Times in 10 Posts

    Last edited by blazingangel1986; 2007-12-29 at 09:38 AM. Reason: links werent working

  10. #7
    iPhone? More like MyPhone sLevin1fo's Avatar
    Join Date
    Sep 2007
    Location
    F**K YOU, IM FROM TEXAS (So Original, HUH?)
    Posts
    104
    Thanks
    16
    Thanked 5 Times in 5 Posts

    I found it. Thanks

    But Jailbreakme.com isnt not working for me. It just does not Jail Break!
    8GB 2G 1.0.2v 3.14.08_G AT&T RIP
    16GB 3G 2.0.2v 2.02.01 AT&T RIP
    8GB 3G 3.0 04.26.08 AT&T RIP
    16GB 3GS 3.0.1 04.26.08 AT&T RIP
    16GB 3GS 3.1.3 5.12.01 AT&T RIP
    16GB iPhone4 3.10.01 4.2.1 Fancy iPod



  11. #8
    7. (update to 1.1.2) On iTunes press UPDATE. it will update your phone to 1.1.2 without errors, wait for it to finish, a picture of a plug will appear on the iPhone and it will tell you to slide to unlock in Gibberish, on iTunes it will tell you, that you need iTunes 7.5 or higher to activate you phone.(do an UPDATE, NOT a restore! OF COURSE ONLY DO THIS WHEN IT IS 1.1.2 YOU ARE PROMPTED FOR! AS SOON AS APPLE RELEASES e.g. 1.1.3 or 1.2 or anything else HIGHER THAN 1.1.2, THIS STEP WONエT BE POSSIBLE ANYMORE! at least not this way….)
    Now how can i do this? the iTunes now have the 1.1.3 update!

  12. #9
    you have to downgrade the base bands too because ur still on 1.1.2 instead of the 1.1.1
    only the firmware was downgraded

  13. #10
    Livin the iPhone Life sziklassy's Avatar
    Join Date
    Jan 2008
    Location
    Iowa (ISU for Vet School!)
    Posts
    3,920
    Thanks
    69
    Thanked 310 Times in 264 Posts

    How many of these threads that explain the same exact jailbreak and turbosim process are we going to see? I mean thanks for taking the time to make the guide, but it is already out there.
    ------------------------------------------------------------------------------------------------------------------------------------------------------------------
    I once prayed to God for an iPhone, but quickly found out He didn't work that way...so I stole an iPhone and prayed for His forgiveness.

    A dog is the only thing on earth that loves you more than you love yourself. - Josh Billings

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •