Results 1 to 7 of 7

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: Please help with 1.1.2 OTBAL

  1. #1
    Default Please help with 1.1.2 OTBAL
    Alright ive done all of the necessary steps for this to occur. downgrade, then install apps, update, jailbreak.jar etc etc. but it seems whenever i downgrade it allows me to use the phone in whichever way i want, besides it wont activate and connect with AT&T. Has anyone had this problem? and if it helps its a 50th week model.

  2. #2
    My iPhone is a Part of Me Sidetalker's Avatar
    Join Date
    Sep 2007
    Location
    York, PA
    Posts
    902
    Thanks
    7
    Thanked 400 Times in 122 Posts

    Alright ive done all of the necessary steps for this to occur. downgrade, then install apps, update, jailbreak.jar etc etc. but it seems whenever i downgrade it allows me to use the phone in whichever way i want, besides it wont activate and connect with AT&T. Has anyone had this problem? and if it helps its a 50th week model.
    yeah this is because your baseband is still for 1.1.2 (the firmware that your phone came with) and not for 1.1.1 (the firmware that you downgraded to)

    just downgrade to 1.1.1 and using wifi jailbreak and install oktoprep. then upgrade back to 1.1.2 through itunes and jailbreak using the dev team jailbreak...

    if thats what you're already doing explain your problem in a little bit more detail?
    For Help
    Private Message, Email, or AIM
    (My response time might be a little long)

    STATUS: Real busy all the time...

    GUIDES:
    Expect more when I find something guide-worthy.
    PM me and let me know if you need one.

  3. #3
    yeah thats exactly what im doing and everything does what it says its supposed to do EXCEPT... whenever i downgrade to 1.1.1 the phone wont activate with AT&T. i understood its supposed to get service now, i went ahead and upgraded back to 1.1.2 and still no service. any idea whats wrong?

    here is the tutorial i was using:

    http://www.hackint0sh.org/forum/showthread.php?t=18284

  4. #4
    My iPhone is a Part of Me Sidetalker's Avatar
    Join Date
    Sep 2007
    Location
    York, PA
    Posts
    902
    Thanks
    7
    Thanked 400 Times in 122 Posts

    Download 1.1.2 Firmware here
    Download 1.1.1 Firmware here
    Download 1.1.2 Jailbreak Pack here
    Download iBrickr here

    The Process (1.1.2 Out of Box):

    Step 1: If you are on this step you have an Out of Box iPhone with firmware 1.1.2. Enter recovery mode on your iPhone by holding the power and home buttons until the "connect to iTunes" picture appears. Once iTunes recognizes your iPhone, shift-click on "Restore" and navigate to your 1.1.1 Firmware (download here). Allow iTunes to downgrade your 1.1.2 firmware to 1.1.1. When finished iTunes should give you error #1015.

    IF YOU HAVE VISTA! and you experience troubles with iBrickr... On Windows Vista iBrickr will only work after a restart and it will only work once. Restart your computer and open iBrickr and you should be good to go. However, if you close out of iBrickr, you will need to restart again.

    Step 2: If you are on this step you have just downgraded your Out of Box iPhone to firmware 1.1.1 and gotten error #1015. Open iBrickr (download here). One of the options it will give you will say something similar to "reboot phone" (I haven't done this myself but I will as soon as I can and let people know). Click on "reboot phone" (or the similar command) and iBrickr will attempt to reboot your phone. Activate your iPhone through iTunes after it has booted up (at this point don't worry about having no service, it will come back when we upgrade to 1.1.2 again).

    Note: Many people will experience trouble with rebooting the iPhone with iBrickr for various reasons... If you are one of those people hang tight, I will post an alternate method the second I have time.

    Step 3: If you are on this step you have an activated iPhone running firmware 1.1.1. Visit www.jailbreakme.com URL on your iPhone (you need WiFi to do this as the Edge network won't be working). Click "Install AppSnapp". Your iPhone will navigate to another page and briefly show a blue square in the upper corner before Safari crashes. At this point a status HUD should pop-up and display the status of the jailbreak. If you do not see this status HUD, go back to www.jailbreakme.com and try it again. After a successful jailbreak, your iPhone will soft-restart and you will see Installer.app on your homescreen. At this point I find it's best to do a manual restart (hold the power button until the "slide to power off" slider appears. Slide it off, then hold the power button until the iPhone starts back up). This step is optional though.

    Step 4: If you are on this step, you have a jailbroken (if you have Installer.app, you are jailbroken) iPhone running 1.1.1 firmware. Click on Installer on you iPhone homescreen and allow it to check and refresh your sources. If necessary, update Installer (you will see an Installer update in the update tab in Installer if this is necessary). Under the Install tab, navigate to Tweaks (1.1.1) > OktoPrep and download OktoPrep. After the download, click the home button and allow the iPhone to soft-restart. Back in iTunes, shift-click on "Upgrade" (NOT RESTORE!) and navigate to your 1.1.2 Firmware (download here). If iTunes is already prompting you to upgrade to 1.1.2 it is not necessary to shift-click...simply click "Upgrade" and allow your iPhone to be upgraded (NOTE: if you do this, iTunes will automatically download the firmware taking around 5 mins at broadband speeds).

    Step 5: If you are on this step, you have an iPhone at the activation screen running firmware 1.1.2 and had installed OktoPrep on 1.1.1 before upgrading. Close out of iTunes. Unzip and open the folder containing the 1.1.2 Jailbreak (download here). Double-click on windows.bat and hit enter when Command Prompt pops up. A Java window will pop up (I would suggest to check "Install SSH" but that's up to you). Click Jailbreak! A progress bar will pop up and Command Prompt will start displaying code. Let the program run (it should take under 10 minutes). After it's finished it will say "Done! Reboot your device (it will automatically reboot once after you do so)". And wala! JAILBROKEN
    Try using that process...I didn't really read through the guide you used but I don't know anyone that this hasn't worked for.
    Last edited by Sidetalker; 2007-12-21 at 04:19 AM.
    For Help
    Private Message, Email, or AIM
    (My response time might be a little long)

    STATUS: Real busy all the time...

    GUIDES:
    Expect more when I find something guide-worthy.
    PM me and let me know if you need one.

  5. The Following User Says Thank You to Sidetalker For This Useful Post:

    lbjandai (2007-12-27)

  6. #5
    ok i got it!!! thanks a lot man!

  7. #6
    My iPhone is a Part of Me Sidetalker's Avatar
    Join Date
    Sep 2007
    Location
    York, PA
    Posts
    902
    Thanks
    7
    Thanked 400 Times in 122 Posts

    awesome to hear! Glad I could help!!! Don't forget the thanks button
    For Help
    Private Message, Email, or AIM
    (My response time might be a little long)

    STATUS: Real busy all the time...

    GUIDES:
    Expect more when I find something guide-worthy.
    PM me and let me know if you need one.

  8. The Following User Says Thank You to Sidetalker For This Useful Post:

    cantgetagoodsn (2007-12-21)

  9. #7
    well crap. now its messing up. it wont go to the call options screen during a call... so i cant hangup or speaker etc. does anyone have an idea?

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •