Results 1 to 3 of 3

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: Unbrick the iPhone 3G - Store only version of iTunes?

  1. #1
    Default Unbrick the iPhone 3G - Store only version of iTunes?
    Store Setup Requirements for iPhone

    This document outlines the initial store setup requirements that you must fulfill in order to effectively sell the iPhone in store. To ensure customers can leave with a fully functional iPhone, it must be first be "unbricked". This process involves using the tether (a USB cable: see below) to connect/sync the iPhone to a unique 'Activation Only' version of iTunes via a computer. More information about the unbricking process will be provided in training (found on Fast Track and Sales Central) and you will be informed when the job aid is available.

    Glossary:
    Bricked: Default state of the iPhone, only emergency calls allowed.
    Unbrick: Enabling the phone for services.
    Tethering: Connecting an iPhone to a computer running iTunes.
    Activation: Customer account setup and CTN provisioning which is completed in-store and is immediate. This is identical to today's process for other wireless products.

    Requirement 1) Download/Install 'Store only version' of iTunes

    * In order to unbrick the iPhone in store (which is a requirement of the iPhone Sales Process), you must have iTunes version 7.6.3b4. Installed on your computer. This version has a special 'Activation Only Mode' that must be enabled and used in store.

    * The iTunes version that is currently available on the Apple website is version 7.6.2. This version does NOT have the activation only mode and as such please action the following steps to complete the installation of version 7.6.3b4:

    1) Download and install 7.6.3b4 from the following link. Do not attempt to use any other version of iTunes as V7.6.3b4 is a specific activation only module designed for in-store use.
    https://attache.apple.com/AttacheWeb...QNmUHPjRZRI%3D
    2) When you enter the link above you will be asked if you want to 'open' or 'save' the file. Select 'Open'. The file is 102mb and may take 5 to 15 minutes to download, depending on your connection speed.
    3) Once downloaded you will see a window containing two files. One file is for a Mac and the other is for Windows. Please double-click the Windows.exe file.
    4) A small 'warning' window will pop-up that advises you to extract all files –Please do so.
    5) An 'Extraction Wizard' will start. Click 'Next'.
    6) You will be asked where you want the files to be extracted to. The default location (a temporary file) is ok, so select 'next'. You will then be advised that the extraction has finished. Click 'Finish'.
    7) A new window will appear with the extracted files in (both Mac and Windows). Double click on the Windows.exe file. You may be presented with a Windows security warning. If so, select 'Run' as the files are safe. There may be a delay before the next step starts.
    8) Pop-up windows and instructions will guide you through the rest of the installation process. You must close MS Outlook (if it's open) before completing the installation.
    9) During the installation process you will be asked if you would like an iTunes shortcut on your desktop – Please do so.
    10) You may be asked to restart your computer – Please do so if asked.
    11) Once you have restarted you will see an iTunes shortcut on your desktop.
    12) The download process is complete – you must now follow the following steps to complete the process.

    * You MUST now enable the 'Activation only Module' within iTunes.

    13) Create a shortcut on your desktop by right clicking on a blank space on your desktop and selecting 'new' and then 'shortcut'.
    14) A 'Create a shortcut' wizard window will appear. In the box within the window marked 'Type the location of the item', please type or copy and paste the following bolded text in this EXACT format.
    15) Please ensure you use the whole of this text with all punctuation/grammar exactly as specified:
    "CProgram Files\iTunes\iTunes.exe" /StoreActivationMode 1

    16) Click 'Next'. You will be asked to enter a name for the shortcut. use:
    iTunes Activation Module

    17) Click 'Finish'. You will now see a new iTunes shortcut on your desktop with this name.
    18) This shortcut is the Activation Module and should be used to unbrick the iPhone. When you first start this version of iTunes there will be a terms and conditions agreement that you will need to "accept' in order to proceed.

    Note: Unbricking the iPhone should only be completed after activating the iPhone on Sales Central. Full instructions on how and when to activate and unbrick will be provided in a training job aid on fast track and sales central. You will be informed when this Job Aid is available.

    Note: As of July 11 2008, an updated version of iTunes (7.7) will be publicly available from Apple Canada. It will have the activation only mode built in (like 7.6.3b4) so you will not need to use unique Weblinks to download it. As it is a publicly available version of iTunes it still needs to be configured for store use. Therefore you MUST 'enable' version 7.7 in the same way as you did for version 7.6.3b4 that is detailed above.
    1) To update your current version (7.6.3b4) to V7.7 to benefit from software updates; Open iTunes, select 'help' and 'check for updates' or go to Apple Canada and download iTunes from the 'downloads' section. You do not have to uninstall previous versions first.
    2) You MUST still enable the activation only mode, using the shortcut creation method above.

    Requirement 2) Tethering the iPhone
    Ÿ Every iPhone box contains its own tether (USB cables to connect the iPhone to the computer) which is required to complete the unbricking process and for customers to sync their iPhone's at home.
    Ÿ In order to speed up the in store process you will receive 2 tethers for your store as part of your Demo unit docking station shipment.
    Ÿ Attach each tether via a USB port (ideally USB 2.0) to separate computers. There is no need to remove the tethers; they can remain connected at all times. If the tether is not long enough, you can extend it with a USB extension lead purchased from many electronics stores
    Ÿ The iPhone will need to be connected at the other end of tether for unbricking - only after the activation has been completed in SC (see training module on SC and Fast Track for details).


    Requirement 3) Sales Central Training and IDs
    Ÿ iPhone should only be activated via Sales Central and through the call centre in an emergency.
    Ÿ An iPhone Sales Process job aid will be available on Fast Track and SC. It details all the related sales process discussed in this document and others, including Sales Central.
    Ÿ Please ensure all store reps have their own unique and active Sales Central ID and have reviewed the job aid.
    Ÿ The iPhone product will be made available through DOAT in due course (you will be advised when this happens) and no other special permissions are required in order to activate the iPhone.

    Additional Information:

    * Product training is now available on Fast Track – Please sign up as soon as possible!
    * Mosaic Representatives will be visiting select stores in the lead-up to Launch
    * Launch day plans will soon be available. In the interim please do not modify your store opening hours, speculate onlaunch plans, contact the media or create any form of waitlists or advertising related to the iPhone.


    RapidShare: Easy Filehosting
    RapidShare: Easy Filehosting

    Found on ***Rogers iPhone 3G In-Store Activation Process Explained*** - iPhone in Canada Forums - The Canadian iPhone Online Community

    Sry for the wrong forum.
    Last edited by benne; 2008-06-29 at 07:45 PM. Reason: Automerged Doublepost

  2. #2
    Retired Moderator iphonejeff's Avatar
    Join Date
    Jul 2007
    Location
    Los Angeles
    Posts
    1,339
    Thanks
    18
    Thanked 70 Times in 62 Posts

    interesting....moved to the right section tho

  3. #3
    hmm the iphone 3G havent been released yet so this does not really help and besides you cannot leave the store with an Activiated iPhone so how does this process work?

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •