[tomain]

I also don't have safari, I should have mentioned it in my previous post. I just assumed it was an edge thing. Is anyone experiencing a problem with edge after upgrading to 2.0? Again, I have the Tzone data plan with Tmobile. All worked prior to upgrade???

TIA

[vinko]

Originally Posted by tomain

... Again, I have the Tzone data plan with Tmobile. All worked prior to upgrade???

TIA

I saw that there is a special hack (TZones Hack) in Cydia for the TZone data plan.

Originally Posted by MJedi

Thanks. How about my other concern, that I have a factory-installed 4.6BL? Will this be a problem?

Sorry, I do not have an definite answer to that, but I don't think it should be a problem. I believe the Pwnage Tool replaces the Bootloader with the version that was on the phone. That is probably why the Pwnage Tool requires you to have the two versions of the Bootloader on your Mac during the Pwnage.

[roksta2s]

Originally Posted by Happyperson

I've followed the instructions, but it failz for me every time it trys to write the .ipsw file. Do i need to do somthing that is not in the instructions?


OUTPUT FROM THE LOG FILE:
2008-07-21 14:37:15 - Scanning root filesystem with ASR.
2008-07-21 14:37:34 - FAIL
------------------------------
2008-07-21 14:37:34 - Failed to build custom .ipsw file.

I'm having the exact same problem. Anyone figure this out?

tried it with 1.4 and 2.0 loaded. Fails in the same spot... also it never asks me for the 46 bootloader as in the instructions.

[vinko]

Originally Posted by roksta2s

... tried it with 1.4 and 2.0 loaded. Fails in the same spot... also it never asks me for the 46 bootloader as in the instructions.

The new version (2.0.1) of the Pwnage Tool is able to automatically locate the Bootloader files on your Mac.

I presume you received these Bootloader files were from the link in the guide here.

The possible explanation for your problem is that the original firmware (IPSW) file is not the version Pwnage Tool expects. Did you download that using the link from this guide here? Or did you receive it from Apple via iTunes? Have you confirm this IPSW is in the correct location on your Mac?

[qookhoo]

Dear all,

I remembered that the general request to have prefix allocation of space for the system. What would be recommended? I set only 500mb... Should I reinstall the 2.0 firmware with 1gb allocation?

cheers...

[aussiewal]

Well, I have followed the instruction and have successfully managed to get 2.0 installed and can use everything on the phone except...

When I tap on the Cydia icon it doesn't do anything, do I need to activate it some where, or install something else to get it to work?

[enjoylife]

i did the pownage 2.0.1 upgrade but now can not surf using edge..
- how do we get it to work?
there is no apn settings any more.

[roksta2s]

Originally Posted by vinko

The new version (2.0.1) of the Pwnage Tool is able to automatically locate the Bootloader files on your Mac.

I presume you received these Bootloader files were from the link in the guide here.

The possible explanation for your problem is that the original firmware (IPSW) file is not the version Pwnage Tool expects. Did you download that using the link from this guide here? Or did you receive it from Apple via iTunes? Have you confirm this IPSW is in the correct location on your Mac?

I downloaded both from the links and its in the correct spot. No luck with it.

[aussiewal]

Still can't get Cydia to open on my iPhone, have repwnaged it but still nothing, what am I doing wrong?

Is there something other than Cydia I need to install during the process of upgradeing from 1.1.4 to 2.0? on my 1st Gen iPhone?

Is anyone having he same problem?

All the features on my phone work fine except I have no apps other than what is from the Apple App Store?

Is this correct?

[serickjr]

I've succesfully Unlocked my phone, but now I am getting the error message below and can not sync my phone. Any suggestions?

"iTunes cannot read the contents of the phone "Stans iPhone". Go to the summary tab in iPhone preferences and click restore to retore this iPhone to factory settings"

Help Please.....I can can not get any of my music, photo's, contacts, etc.....onto my phone!

Thanks,
Stan

[Kappa99]

I finally jailbroke my phone ..after many searches and failed attempts the best guide is the following

iClarified - iPhone - How to Jailbreak Your 2.0 3G iPhone (Windows)

[stunna2095]

when im doing the unlock and jailbreak on 2.0 do i have to have a sim card in the phone or can i do it without one....soryy im kinda new at this

[maxx]

I'm so close! I pwned (2.01) my 1st gen iPhone while the old deactivated sim card from AT&T was in the phone. Upon restart Phone said attempting to activate and I clicked dismissed. Replaced it with a T-mobile sim card and the phone went in to recovery (usb/itunes). Itunes said the phone could not be activated with that sim card. I restored and re-pwned the phone with the TMobile sim card inserted. Once again same warning from iTunes. Re-inserted old sim and loaded bootneuter through cydia and checked all boxes "on" and flashed the firmware. Re-inserted the TMobile card again and same warning on phone "bad sim card" with the usb/itunes splash screen and Itunes "cannot activate with this sim card...but the header on the phone now says TMobile! I was able to make an emergency call to another phone which recognized the TMobile number in the caller ID. I just need to break out of recovery with the TMobile sim card installed. please help!

[atrain]

I have an ipod touch, for which the process of jailbreaking seems to be somewhat different (a few steps less, obviously, as i don thave to worry about the 'phone' part). At the end of the process, after having created the custom restore, there is nothing about DFU mode, i simply put it into recovery mode. And as I tried to restore using the custom restore previously created, after extracting the software i got the following allert saying: Ipod couldn't be restored Unknown error (1600)

atm i'm unable to turn on my ipod at all, please help.


EDIT: ok, somehow, my ipod came out of recovery mode (no idea what happend) and yeh, i just updated to the last 'custom FW', so YAY now running 2.0 and please disregard previous statement.

[johny_thirty]

Is it working on 1.1.3 jailbreak iPhone?.Did anyone here actually success upgrading their iPhone jailbroken, unlocked 1.1.4 or previous 1st generation into the new 2.0 firmware?.