-
04-13-2011, 10:48 PM #1
Gevey SIM: Can't get past airplane step
After pressing accept, waiting, dialing 112, waiting, and then turning on airplane mode, I never recieve a SIM Failure or No SIM Card Installed message. It just sits there.
I suspect this is due to the fact that in order to activate I had to jailbreak the phone. (iOS 4.3.1)
Would restoring to stock 4.3.1 and using a blank AT&T SIM to get past the activation screen make this thing work?
Thanks!
-
04-14-2011, 01:04 AM #2
try to "reset all settings"
it worked for me.
-
04-14-2011, 10:14 AM #3
-
04-14-2011, 03:50 PM #4
-
04-14-2011, 03:54 PM #5
I find that sometimes if you don't wait enough for all the steps, it won't work.
For me, I noticed that I had to have the signal bars come up after the accept message, wait 15 seconds, then dial 112 for 2 secs, and then turn on airplane mode for up to 45 seconds. Once the "no sim detected" message pops up on airplane mode "on", then I switch it back on and get "sim failure". After that, everything is good.
-
04-14-2011, 05:34 PM #6
Last edited by hiddengopher; 04-14-2011 at 05:34 PM. Reason: Automerged Doublepost
-
04-14-2011, 06:32 PM #7
you need to watch applenberry's youtube video..
after you dial 112 and call ended, you need to 'turn on' airplane mode before the 'no sim card' appears.. (if not, repeat the process)
now, after you turn off airplane mode, 'invalid sim appears' don't do anything, wait for it to search for a signal.. that's it!
-
04-14-2011, 07:16 PM #8
-
The Following User Says Thank You to hiddengopher For This Useful Post:
Simonsezwut (04-15-2011)
-
04-14-2011, 08:12 PM #9
-
04-14-2011, 10:14 PM #10
-
04-14-2011, 11:31 PM #11
-
04-15-2011, 12:20 AM #12
-
04-15-2011, 12:59 AM #13
try to reset all settings, and try again..
im using a counterfeit gevey sim, and it works ok, i dont see any reason that it won't work.
-
04-15-2011, 03:53 AM #14
Don't panic....hehe
Don't update anything... Here you go...
T-Mobile Settings: There’s a lot of different settings floating around. Trust me. Use these:
APN: wap.voicestream.com
User Name: blank
Password: blank
APN: wap.voicestream.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy: 216.115.165.50:8080
MMS Max Message Size1048576
MMS UA Prof URI: http://www.apple.com/mms/uaprof.rdf
Watch my video, and turn off your 3g! T-Mobile US is Edge.
Let me know how you made out...
[ame=http://www.youtube.com/watch?v=1RZsffEvHuE]YouTube - Gevy Sim T-Mobile US Working Fine.wmv[/ame]
Comment on your video
1. Your sim card is fine and you're off to a good start
2. Forget about counting.
3. Click Accept
4. Go to your phone app
5. When you see one bar, dial 112 and hang up immediately. (Don't count)
6. Go into Settings and turn on flight mode. (LEAVE IT ON UNTIL YOU SEE THE POP-UP "No SIM card installed"
7. Click "OK"
8. Turn Flight Mode off.
9. Now be patient and just wait.
Do these steps exactly. Don't count, or browse your phone.
Also, you had 3g turned on. Make sure it always stays off.
Cellular Data ON
Data Roaming ON
Good to go...Last edited by Simonsezwut; 04-15-2011 at 03:53 AM. Reason: Automerged Doublepost
-
The Following User Says Thank You to Simonsezwut For This Useful Post:
hiddengopher (04-15-2011)
-
04-15-2011, 03:05 PM #15
I'm trying what you said as we speak!
I'll let you know how I do. Thanks a ton. People like you are what makes forums so great.
edit: for some reason I couldn't access the cellular data settings...so I'm restoring the 4.3.1 ipsw via redsn0w.
UPDATE: Turned airplane mode on, and wiated for the No SIM message, and it never came up. :/Last edited by hiddengopher; 04-15-2011 at 03:20 PM.
-
04-15-2011, 08:02 PM #16
Got gevey working hhaa
Sent from my iPhone using ModMyi
-
04-15-2011, 08:07 PM #17
Sent from my iPhone using ModMyi
Gevey steps
-
04-15-2011, 08:08 PM #18
-
04-15-2011, 08:35 PM #19
-
04-15-2011, 09:43 PM #20



LinkBack URL
About LinkBacks
Reply With Quote
