[Pre-Guide] UNLOCK 1.1.2 (windows) long

[brent91055]

I bought an out of the box firmware 1.1.2 pre-installed. it has that 4.0.6 bootloader on it. I paid for iphonesimfree and I kept getting a baseband communication error. I unlocked it by downgrading back to 1.0.2, and using my Turbo Sim. I'm now back on T-Mobile...the only thing I don't have is the Wi-Fi store. I recommend if you have a Turbo Sim...use it.

[Fresh]

Brent, Turbosim should be working with 1.1.1 and you'll have the iTunes store!
1.1.1 is quite easly to jailbreak. No need for you to run anysim, am I correct?

Fresh...

[brent91055]

That is correct. Can you please tell me how to do it. I've been racking my brain and I still can't figure it out. Thanks

[Fresh]

From what I read is that you only need to jailbreak and activate 1.1.1 and your ready to go with a Turbosim. It might even work on 1.1.2.

If it doesn't work, your iPhone probably need to be virginized, because it was software unlocked in 1.0.2?

Fresh....

[brent91055]

Ok fresh, I'm gonna give it a shot. Thanks for the tip

[Fresh]

Let me know, if you need help PM me.

Fresh...

[Penduboy]

GOOOOOOOOOOOOOOOOOOOOOOOD Work Brof
You have done it
But there is only one problem is on the step 5
- The first page has to be exactly: prefs://1F (not pref://1F)
and every thing is coooooooooooooooooooooool

Chers

you can simply type Prefs: instead of Prefs://1F

pendu

[nikunj]

Hello
I hav recently upgraded my phone from 1.0.2 to 1.1.1
right now the status is as follows:
version: 1.1.1(3A109a)
IMEI 0113xxxxxxxxxxxxxx
modem firmware 04.01.13_G

Now please guide me if in the process i really need to downgrade it to 1.0.2 again.?
please help
thankyou

[Fresh]

There's no need to downgrade all the way to 1.0.2.

[nikunj]

thankyou

Hey
thanx for your reply.
I was successful to jailbreak the 1.1.2 and use it .
Now after instaling anySim1.2 when i slided it to start after few mins it got hanged showing the white ring. after few time the phone got restarted i guess and then it got stucked on silver apple and after few time the white ring keeps on coming and goin.

Wht should be the problem ?
I tried restorin 1.1.1 and did the comelete process twice. but no luck.
What should i Do?
You mentioned i should do it on Flight Mode. Is it very necessary? Wht i did is putting my NON-At&t sim and tried unlocking.
please help
Thankyou
nik

Hey finally i got through.
Just few points you must take care of :

1: When you jailbreak 1.1.2 got to installer > Tweaks1.1.2
and install IWorld. And when installed open it and select your country and do the setting . This will avoid the Crash and hanging problem while AnySim Works.

2: After installing AnySim and before you run it , Turn You phone on flight mode and then use Anysim.

with the help of the above points i managed to get my phone working with non at & t sim.
Thanks to the thread starter! Saltey!

[jomanjy]

Thank you ,,

waiting to unlock OTB 1.1.2

[veenuj]

Can I use the files mentioned in Download pack http://rapidshare.com/files/69848230/1.1.2pack.zip method on Windows rather than OSX OS, as I have windows PC

[nikunj]

yeah

[darkmatter]

So, then Finally someone can confirm that this guide works on the iPhone with 1.1.2 OTB ?

[Fresh]

sigh...

[Shaymichel]

hi my iphone runs a script in a black screen i try to boot it but now it just run like a starting computer and in turns off then again it opens. runing this scrippt and turn off damn

can you help me

[jomanjy]

thankyou

Hey
thanx for your reply.
I was successful to jailbreak the 1.1.2 and use it .
Now after instaling anySim1.2 when i slided it to start after few mins it got hanged showing the white ring. after few time the phone got restarted i guess and then it got stucked on silver apple and after few time the white ring keeps on coming and goin.

Wht should be the problem ?
I tried restorin 1.1.1 and did the comelete process twice. but no luck.
What should i Do?
You mentioned i should do it on Flight Mode. Is it very necessary? Wht i did is putting my NON-At&t sim and tried unlocking.
please help
Thankyou
nik

Hey finally i got through.
Just few points you must take care of :

1: When you jailbreak 1.1.2 got to installer > Tweaks1.1.2
and install IWorld. And when installed open it and select your country and do the setting . This will avoid the Crash and hanging problem while AnySim Works.

2: After installing AnySim and before you run it , Turn You phone on flight mode and then use Anysim.

with the help of the above points i managed to get my phone working with non at & t sim.
Thanks to the thread starter! Saltey!

good .. congratulation

was your iPhone OTB 1.1.2?

can you please tell us waht exactly you did from step 1 till you get it unlocked?

Thanks,

[nikunj]

Hey
nope it was not.
I had 102 then i upgraded to 111 and then 112 finally!
if you need any help message me

Hey
nope it was not.
I had 102 then i upgraded to 111 and then 112 finally!
if you need any help message me on msn

hi my iphone runs a script in a black screen i try to boot it but now it just run like a starting computer and in turns off then again it opens. runing this scrippt and turn off damn

can you help me

hey try restoring it

[kunalc]

i just bought a new 1.1.2 version phone so wanted to know when is the unlock coming out for this version....i cant wait anymore....i heard it is coming out this week is this true??

[jvicent]

Still unclear to me... has anyone unlocked an OTB 1.1.2 iphone?????? does this really work?