Anyone working for AT&T fixing SwirlyMMS anymore?

[Tohsh]

Searched every Swirly thread for a possible fix. Called about 20+ representatives with no luck. Was wondering if anyone out there is still providing fixes for this that work for AT&T. Every post I've found on it is either dead or they are no longer doing it. I am willing to donate a decent amount as long as you have the proof to back your work up. Hit me up through a PM if possible.

[sinner1649]

i work for AT&T but I'm not going to risk my job for someone to have mms...I have posted in a few different posts numerous ways to get it done. Most of the time just resending all ota's and clearing the vlr will do it. Good luck!

[Tohsh]

as I said in my post I've tried numerous times with no success (20+). Finally got a tech to enable WAP Push for me and send and OTA reset which did not solve the problem. I then called another tech and had her do an OTA reset which has still not fixed the problem. I have followed every guide to the letter with no success.

[bschucher]

as I said in my post I've tried numerous times with no success (20+). Finally got a tech to enable WAP Push for me and send and OTA reset which did not solve the problem. I then called another tech and had her do an OTA reset which has still not fixed the problem. I have followed every guide to the letter with no success.

Im with ya.. Ive tried it all.

[Plotkin35]

Could use help too. Talked to many a mean and many a nice agent. Customer service/tech support, teir 2 tech support. The teir 2 lady finally turned evrything on for me, switched me from an iphone messaging plan to an unlimited text messaging plan (non-iphone). So I receive a message while I'm on the phone with the woman, but I can't open it. I get the 403 error. I can't sent messages either. She told me I have the correct settings (even though she wouldn't give me the proper MMSC information. When I read her what I had she said those should be correct.

So long story short....I have an MMS message sitting in m inbox, but I can't check it. Anybody out there working for AT&T that would be willing to check my setting on my account for me? I could pay a few $ for this?

Thanks,
Plot

[gQstatus05]

Here are the correct settings you should have on your phone PLOTKIN (given that everything is enabled)

wireless.cingular.com
mmsc.cingular.com:80

apn: leave it blank
username: leave it blank
password: leave it blank

Size: medium
User Agent: nokia n95

if that works then you're all set.

Good luck.

[Poseidon79]

Could use help too. Talked to many a mean and many a nice agent. Customer service/tech support, teir 2 tech support. The teir 2 lady finally turned evrything on for me, switched me from an iphone messaging plan to an unlimited text messaging plan (non-iphone). So I receive a message while I'm on the phone with the woman, but I can't open it. I get the 403 error. I can't sent messages either. She told me I have the correct settings (even though she wouldn't give me the proper MMSC information. When I read her what I had she said those should be correct.

So long story short....I have an MMS message sitting in m inbox, but I can't check it. Anybody out there working for AT&T that would be willing to check my setting on my account for me? I could pay a few $ for this?

Thanks,
Plot

A temporary fix to get your messages is to put your SIM into a non-iPhone until it does the IMEI sweep.. usually takes about 10-20 mins tops. Then pop into your iPhone and you'll have MMS for a few mins. I have CHEAP AT&T Go Phone... i put my SIM in there an ope up Media Net.... at first I get the same 403 error but keep trying till it opens up. Then pop it back into the iPhone.

[monchy36]

I'm in the same situacion have to switch my sim to my old phone to maked work... everything is enable ATT keep sending messages telling me to change my media data to iphone data to not get overcharge! to leave the MMS enable do i need to keep using media data? or can i get the iphone data and only use normal unlimited messaging?

[bhz1]

i work for AT&T but I'm not going to risk my job for someone to have mms...I have posted in a few different posts numerous ways to get it done. Most of the time just resending all ota's and clearing the vlr will do it. Good luck!

I dont wonder if ATT caught on because in the last day or two a few people have requested their Swirly MMS help threads to be deleted.

[Tohsh]

I dont wonder if ATT caught on because in the last day or two a few people have requested their Swirly MMS help threads to be deleted.

I think so as well. Had my friend check all my settings and they are all correct. My MMS will work if I put it in another phone for about 5 minutes then back into the iPhone, but will only Send/Receive for a few minutes until the IMEI's number sync again. I have a family text messaging plan as well. Dunno what else to do.

[Plotkin35]

Here are the correct settings you should have on your phone PLOTKIN (given that everything is enabled)

wireless.cingular.com
mmsc.cingular.com:80

apn: leave it blank
username: leave it blank
password: leave it blank

Size: medium
User Agent: nokia n95

if that works then you're all set.

Good luck.

gQ,

First thank you for the help. Here is what I'm getting.

I used those settings (above) and get the following error:

when receiving: Fetch Error: unexpected http response....

send sending: Failed to send MMS, Possible incorrect mmsc setting. Unexpected http response (HTTP/1.1 403 Invalid MSISDN number received.)I used what you put in your post quoted above.

Any other ideas? I called AT&T again and they said I have everything on, on their end.

[xknurdssip]

ok here is my story...i have had mms working for 2 months perfectly fine after days and days and hours of calling..and than before 2.2 came out it got wiped and stopped working..i used the same settings listed above...now i uodated and cant get it to work...i told att i was using blackjack and switched to pda plan no visual voice mail and it worked before...now all settings r same and everything..swapped to different phone and still nothing im gettin could not connect to proxy unable to connect to host...some one any help??