+ Reply
Page 1 of 2 12 LastLast
Results 1 to 20 of 30
  1. #1
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default 3Gs After 06.15 Baseband Unlock

    Hey guys so I have a little problem with my friends 3GS that I unlocked.

    First of all this is how I did it.

    1) It was on 4.1 so I updated to 4.2.1
    2) Then flashed with the iPad baseband for unlock
    3) installed ultrasn0w

    ok so the unlock was working for 2-3 days however during those 2-3 days the phone sometimes kept on restarting and giving me error "restore needed iphone cant make or receive calls" a simple reset would fix it.

    Now this is what i am seeing on the phone all the time
    so since I am on the 6.15 baseband I cant restore to stock firmware so okay I resotred with custom firmware and everytime I look on the top of the phone I see "searching...." I have read a little that it might be corrupted firmware? but how would this happen by itself ?

    one more thing is that my wi fi and bluetooth are greyed out and when I go to about I cannot see the baseband version...

    someone who is smart with this please help me out

  2. #2
    Super Moderator Poseidon79's Avatar
    Join Date
    Jan 2008
    Location
    Austin, TX
    Posts
    8,261
    Thanks
    819
    Thanked 1,665 Times in 1,156 Posts

    Use redsn0w to flash the baseband again then restore to a custom firmware.

  3. #3
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Thank you for your reply. But how would I do that since I have no WI-Fi it's greyed out ?

  4. #4
    Superbad Moderator Simon's Avatar
    Join Date
    Nov 2007
    Location
    Bermuda
    Posts
    38,300
    Thanks
    1,933
    Thanked 5,991 Times in 4,294 Posts

    You dont need wifi to flash the ipad baseband again. Just use redsnow.

  5. #5
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Well for some reason it always gets stuck on flashing iPad baseband only any solution to this ?

  6. #6
    Superbad Moderator Simon's Avatar
    Join Date
    Nov 2007
    Location
    Bermuda
    Posts
    38,300
    Thanks
    1,933
    Thanked 5,991 Times in 4,294 Posts

    Your baseband may be corrupt then unfortunately

  7. #7
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    it gets stuck exactly on Uploading ram disk

    is there anyway to reflash? or only way is to wait for new firmware which can take months... ?

  8. #8
    Livin the iPhone Life
    Join Date
    May 2009
    Posts
    1,270
    Thanks
    43
    Thanked 277 Times in 239 Posts

    Use pwnage tools to create a custom firmware with the iPad baseband built into it. Try to restore to it, let us know the exact error it gives you.

  9. #9
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Babyblue Pimp I do not own a mac if you have a mac would you mind making that custom FW for me ? with being activated ? I would really apperciate

  10. #10
    Superbad Moderator Simon's Avatar
    Join Date
    Nov 2007
    Location
    Bermuda
    Posts
    38,300
    Thanks
    1,933
    Thanked 5,991 Times in 4,294 Posts

    If you want a custom 4.2.1 just PM me

  11. #11
    Livin the iPhone Life
    Join Date
    May 2009
    Posts
    1,270
    Thanks
    43
    Thanked 277 Times in 239 Posts

    Thanks x98, I'm in school and an upload like that would take half the day.

  12. #12
    Superbad Moderator Simon's Avatar
    Join Date
    Nov 2007
    Location
    Bermuda
    Posts
    38,300
    Thanks
    1,933
    Thanked 5,991 Times in 4,294 Posts

    It's cool, I have a few uploaded already

  13. #13
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    please help me too. i have exactly the same problem. i upgraded my iphone 3g to ios 4.2.1 with the new baseband, it worked fine for a few days. Then i got
    'restore needed - iphone cannot make or receive calls. connect to itunes'
    also the wifi is greyed out and bluetooth just displays 000000000000000000000 and there is no IMEI number. I restored my iphone and got error when i tried to restore. so i had to restore it to 4.1 and the used rec boot to get rid of the error and get me out of recovery mode, i then jailbroke it with red snow. My phone loaded again but i am still getting the same message.

    I really don't know what to do i feel like i have screwed my iphone. PLEASE HELP

  14. #14
    Superbad Moderator Simon's Avatar
    Join Date
    Nov 2007
    Location
    Bermuda
    Posts
    38,300
    Thanks
    1,933
    Thanked 5,991 Times in 4,294 Posts

    That sounds like your baseband is corrupt. Dont know if there is much you can do about that sorry. You can maybe try reflashing the iPad baseband onto it again but its a long shot.

  15. #15
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    YouTube - HELP..Iphone 3g ios 4.2 baseband 06.15. cannot make or receive any calls, and no wifi/bluetooth

    what about downgrading the baseband. i heard the dev team are working on doing this, but it hasn't been released yet. when it's released do you think that will work?
    Last edited by lucy18; 12-10-2010 at 10:56 PM. Reason: Automerged Doublepost

  16. #16
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Quote Originally Posted by lucy18 View Post
    please help me too. i have exactly the same problem. i upgraded my iphone 3g to ios 4.2.1 with the new baseband, it worked fine for a few days. Then i got
    'restore needed - iphone cannot make or receive calls. connect to itunes'
    also the wifi is greyed out and bluetooth just displays 000000000000000000000 and there is no IMEI number. I restored my iphone and got error when i tried to restore. so i had to restore it to 4.1 and the used rec boot to get rid of the error and get me out of recovery mode, i then jailbroke it with red snow. My phone loaded again but i am still getting the same message.

    I really don't know what to do i feel like i have screwed my iphone. PLEASE HELP
    So far on my friends 3GS I tried everything however I did not try yet going to 4.1

    so I tried using custom 4.2.1 with ipad baseband = no work still it says searching and wi fi etc is greyed out

    I tried flashing ipad baseband onto the 3gs but it always gets stuck on uploading data (in redsn0w)

    so I am really running out of ideas on what to do

  17. #17
    Superbad Moderator Simon's Avatar
    Join Date
    Nov 2007
    Location
    Bermuda
    Posts
    38,300
    Thanks
    1,933
    Thanked 5,991 Times in 4,294 Posts

    Are you running redsnow in windows xp sp 2 compatibility mode?

  18. #18
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    x89car thanks so much for your help. i am going to see if it works

  19. #19
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts

    so I restored the 3GS to 4.1 and I am getting the same thing "searching..."

    and when trying to flash with iPad baseband it always gets stuck in redsn0w in uploading ramdisk after fetching baseband message is gone. Is there any hope for this iPhone ?

  20. #20
    What's Jailbreak?
    Join Date
    Dec 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts

    i have the same problem. maybe when we can downgrade the baseband, we can then fix it. but we are still waiting for the downgrade to be com;pleted

+ Reply
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts