T-Mobile Logo Problem

[gamer765]

its the same thing as Make it Mine.

[keepit4real]

Same problem here. I am using rebel sim adapter, 2.1 but i have not been able to change logo. There are too many tmobile folder when trying to ssh to iphone.

[GHOSTYAIRO]

I'm with T-Mobile US but it seems that carrier bundle folder is not present in System/Library/Carrier Bundles

[GHOSTYAIRO]

OK here is the solution for those who are with T-Mobile US
Not only you'll have the logo but also I'll edit the carrier.info so you will have the T-Mobile services settings under Settings/Phone.

0.1 Start removing/deinstalling any other logo you installed before (if you did) so there is not conflicts.

1. Download This
2. Unzip it.
3. Open your favorite ssh application (I recommend WinSCP for Windows And CyberDuck for Mac)

google it if you don't have it yet

4. Browse /System/Library/Carrier Bundles/
5. Upload the recently file unzipped it above.
6. Open a command based program (Putty for Windows Although I think WinSCP has a built in one) (the built in Terminal for Mac will do the work)
7. ssh into the iPhone and write this command down

in -s /System/Library/Carrier Bundles/TMobile_US.bundle /System/Library/Carrier Bundles/310260

8. write reboot.
9. Wait till your iPhone boots up and enjoy your brand new T-Mobile logo.

If that helps I think I deserve a Thanks. If that didn't work for you, I'll try to help better.

[gamer765]

Doesn't work. I don't think anything will work with a SIM adapter since it makes the phone able to recieve any SIM (it's a universal sim. no MCC-MNC for it so that's why it points to the unknown.bundle)

[BLASTphemus]

"Make it mine" app from cydia .
install it
open it
Type something like "myphone"
save it
close app
open again
clear what you put. leave blank.
close app
you should now have T-Mobile
install tmobile logo graphic from cyndia
restart phone if changes dont take effect


just did it yesterday and it's working
the graphic look really good. Good quality logo.
good luck

I tried this and when I was halfway Dloading it gave a me Source Error: subprocess pre-intallation script returned error exit status 1

It didn't work for me.

I've been using MIM and it's ok I guess.

OK here is the solution for those who are with T-Mobile US
Not only you'll have the logo but also I'll edit the carrier.info so you will have the T-Mobile services settings under Settings/Phone.

0.1 Start removing/deinstalling any other logo you installed before (if you did) so there is not conflicts.

1. Download This
2. Unzip it.
3. Open your favorite ssh application (I recommend WinSCP for Windows And CyberDuck for Mac)
4. Browse /System/Library/Carrier Bundles/
5. Upload the recently file unzipped it above.
6. Open a command based program (Putty for Windows Although I think WinSCP has a built in one) (the built in Terminal for Mac will do the work)
7. ssh into the iPhone and write this command down

in -s /System/Library/Carrier Bundles/TMobile_US.bundle /System/Library/Carrier Bundles/310260

8. write reboot.
9. Wait till your iPhone boots up and enjoy your brand new T-Mobile logo.

If that helps I think I deserve a Thanks. If that didn't work for you, I'll try to help better.

I want to try this but I don't have WiFi so is there a way to do this via a wired connectoin??

[GHOSTYAIRO]

I

I want to try this but I don't have WiFi so is there a way to do this via a wired connectoin??

Sure There is a way:

1) Install OpenSSH (through Cydia)
2) Download and installLatest version of. Net Framework (If you don't have it yet)
3) Download and Install iPhone Tunnel Suite - Download
3. Installation took place, then you can run the suite. Launch SSH in iPhone / iPod as well.
4. You will find a screen that shows only 3 buttons, first launch "iPhone Tunnel" that will establish a connection to your iPhone / iPod via the USB cable, then make sure to have it connected via USB. If you have not connected the iPhone close the tunnel screen (which is entitled "Launcher.exe"), connect the equipment and launch it again.
5. You can now use WinSCP client and Putty respectively for the file transfer and use of terminal line (Recommended). Within WinSCP there is already a profile called iPhone for the connection, then just click on connect (accedi Italian) to start the communication between the computer and the device.
Note: The WinSCP Client in the program is in Italian , but you can use your own, just set up as follows:
• IP Address: 127.0.0.1
• Port: 22
• Username: root
• Password: alpine
5. Now you are Connected. using WinSCP as if you were connected via WiFi , have fun!
The Credits for this guide should be to "iMakkie" in Italian , and lhinds7 from ipod fansOne more thing, it works even if your iPhone is in sleep mode.

[gamer765]

This doesnt work though. I tested it already. It only shows the text like before, no logo.

[glitchman]

ok, this isnt working at all in 2.2... is there a new way to get this working in 2.2? the carrier bundle works fine, its just the logo that does not show up. Thanks in advance! (PS i am using t-mobile US)

[BLASTphemus]

Why is it that under System/Library/Carrier Bundles/ you can practically see every kind of Tmobile carrier folder for other countries but not a single one that says US.