[ReVan]

Originally Posted by Sylv

hi
sorry i have been in weekend with family
i;ll try
thank you

No luck so far, did it about 4 times and it did not work.

the base band now is 04.01.13 and the verginizer is not working
i tried to update it to 112 then downgrade it to 1.1.1 to verginize the it and its complete successefully but when i finish the phone saied incorrect sim, and after restoring to 111 the phone say activate and it stell say INCORRECT SIM and the IMEI is 004999010640000 it sems this way not working do you know another way to fix the seczone and the corrupted IMEI?


thenk you for ur time

ReVan Edit: Try this:
HAVE THE AT&T SIM CARD IN YOUR PHONE AT ALL TIMES DURING THE ENTIRE PROCESS
1). Restore your phone to v1.1.2
2). Downgrade to v1.0.2 via DFU mode, upon receiving an error 1013, use the 1.1.2 jailbreak software and click Boot from Recovery
3). This should make your WiFi working. Now you can jailbreak and activate your phone (Windows users use: AppTappInstaller & PACAY)
4). Add this to your Installer source: i.unlock.no and refresh the sources.
5). Set your Auto-Lock to Never
5). Install BSD 1.5 via Installer
6). Under the Unlocking Tools category in Installer, install The Virginizer
7). After its done check your About and see that your IMEI should be original along with your modem firmware to be 3.14
8). Feel free to upgrade to v1.1.2 following the guides on this forum.

Originally Posted by lkatzis

please help I try to upgrade from 1.1.1 to 1.1.2 with this guide but in the step that I must run the jailbreak I take the message 'the ipod/iphone can't connect...' My operating is win vista please I don't have anymore phone

Hope you've iTunes v7.5, try disconnecting and re-connecting your phone to iTunes.

[hozay09]

This worked out awesome for me.. i thought I was doomed stuck with a default 1.1.2 iphone.. thanks a million guys

[Sylv]

Originally Posted by ReVan

ReVan Edit: Try this:
1). Upgrade your phones to v1.1.2
2). Downgrade to v1.0.2 via DFU mode, upon receiving an error 1013, use the 1.1.2 jailbreak software and click Boot from Recovery
3). This should make your WiFi working. Now you can jailbreak and activate your phone (Windows users use: AppTappInstaller & PACAY)
4). Add this to your Installer source: i.unlock.no and refresh the sources.
5). Set your Auto-Lock to Never
5). Install BSD 1.5 via Installer
6). Under the Unlocking Tools category in Installer, install The Virginizer
7). After its done check your About and see that your IMEI should be original along with your modem firmware to be 3.14
8). Feel free to upgrade to v1.1.2 following the guides on this forum.

.

Hi

thank you for ur guide but it stll 004999********* and incorrect sim, please help me to find a solution fo my iphone

i've did all the procedures my modem firmware is 3.14
and my version is 1.0.2 and the IMEI is stell wrong.
any help please
Actually i dont know how this satart, but i think the problem start when i stop the CommCenter and then update to 1.1.2 and after it stat to say incorrent sim.

[lkatzis]

please help I have I Tunes 7,5 and Java runtime but in my vista the windows batch of jailbreak dont run (only open and close console) help

Originally Posted by ReVan

ReVan Edit: Try this:
1). Upgrade your phones to v1.1.2
2). Downgrade to v1.0.2 via DFU mode, upon receiving an error 1013, use the 1.1.2 jailbreak software and click Boot from Recovery
3). This should make your WiFi working. Now you can jailbreak and activate your phone (Windows users use: AppTappInstaller & PACAY)
4). Add this to your Installer source: i.unlock.no and refresh the sources.
5). Set your Auto-Lock to Never
5). Install BSD 1.5 via Installer
6). Under the Unlocking Tools category in Installer, install The Virginizer
7). After its done check your About and see that your IMEI should be original along with your modem firmware to be 3.14
8). Feel free to upgrade to v1.1.2 following the guides on this forum.



Hope you've iTunes v7.5, try disconnecting and re-connecting your phone to iTunes.

[ReVan]

Originally Posted by Sylv

Hi

thank you for ur guide but it stll 004999********* and incorrect sim, please help me to find a solution fo my iphone

i've did all the procedures my modem firmware is 3.14
and my version is 1.0.2 and the IMEI is stell wrong.
any help please
Actually i dont know how this satart, but i think the problem start when i stop the CommCenter and then update to 1.1.2 and after it stat to say incorrent sim.

Why are you stopping the CommCenter to Restore to v1.1.2??? You dont need to stop the CommCenter

Editted by ReVan Try this:

HAVE THE AT&T SIM CARD IN YOUR PHONE AT ALL TIMES DURING THE ENTIRE PROCESS

1. Restore your phone to v1.1.2
2. Downgrade to v1.0.2 via DFU mode, upon receiving an error 1013, use the 1.1.2 jailbreak software and click Boot from Recovery
3. This should make your WiFi working. Now you can jailbreak and activate your phone (Windows users use: AppTappInstaller & PACAY)
4. Add this to your Installer source: i.unlock.no and refresh the sources.
5. Set your Auto-Lock to Never
6. Install BSD 1.5 via Installer
7. Under the Unlocking Tools category in Installer, install The Virginizer and let it complete.
8. After its done check your About and see that your IMEI should be original along with your modem firmware to be 3.14
9. Feel free to upgrade to v1.1.2 following the guides on this forum.

*Optional*

If the above steps still do not restore your IMEI to it's original number, then do the following after Step 6 :-

1. Install and run Erica's Unlock.app (found in the Downloads section of this board) takes approx. 20mins to complete.
2. Under the Unlocking Tools category in Installer, install Virginizer v0.3 and let it complete.
3. Reboot your phone and check your IMEI again.

[kevinmscs]

Works like a champ for me. One note to all though. Once you're done, make sure you install Tweak 1.1.2 - AudioAmp. Otherwise your audio level would be very minimal.

Thanks OP et al.

[un4]

Hi. For some reason i get this message when i jailbreak:
"an unrecoverable error was encountered during the jailbreak"
Anyone know why? I've got JAVA intalled..

[kegedean]

Thanks for writing a great and detailed guide.

I have a 1.1.1 iPhone unlocked using anySIM. I am an AT&T customer, I've been using this iphone with my AT&T Sim card without activation or 2 year contract. It works fine.

When I tried to upgrade to 1.1.2, I found something strange. After I did Phase 2 Step 5 (Jailbreak 1.1.2), my iphone picks up reception right after it reboot. I can also make a call using this iphone. I dont understand why. I thought my iphone still locked and I have to go through the end (Phase 3 - Unlocking using AnySIM 1.2.1.u) to make this phone works. Now I have 1.1.2 iphone that works fine without activation/contract.

Is this normal for AT&T customer without activation?

Thanks in advance guys

[saru96]

i have a question using this guide...do you have to re install all your apps? or will everything still be there?
thanks!

[cbrluv]

PLEASE HELP..I UPDATED TO 1.1.2 AND WANT TO DOWNGRADE TO 1.1.1 FOR THE APPS. I GOT TO THE STAGE WITH THE ERROR 1015 AND NOTHING ELSE WILL WORK , WINDOW BAT OR INDEPENDENCE.. I DONT KNOW WHAT IPHUC COMMAND IS OR HOW IT WORKS. WAS I SUPPOSE TO EXCTRACT THE FILES BECAUSE I RAN THEM BUT NOTHING WORKS. WHAT IS THE KEY? VERSION 1.1.2 (3B48b) firmware 04.02.13_G.

[xandili]

Originally Posted by cbrluv

PLEASE HELP..I UPDATED TO 1.1.2 AND WANT TO DOWNGRADE TO 1.1.1 FOR THE APPS. I GOT TO THE STAGE WITH THE ERROR 1015 AND NOTHING ELSE WILL WORK , WINDOW BAT OR INDEPENDENCE.. I DONT KNOW WHAT IPHUC COMMAND IS OR HOW IT WORKS. WAS I SUPPOSE TO EXCTRACT THE FILES BECAUSE I RAN THEM BUT NOTHING WORKS. WHAT IS THE KEY? VERSION 1.1.2 (3B48b) firmware 04.02.13_G.

Just restore again to 1.1.1 and iNdependence will kick you out of recovery mode nicely! The error is normal because of the higher baseband not matching the Firmware version 1.1.1, so don't worry!

[saru96]

For those of you who have owned an iPhone prior to November 9th, then you can skip this step. If you don't otherwise know any better, you might want to verify what bootloader you have on your iPhone right now.

First you will need to have bbupdater installed in your /usr/bin folder.


Code:

launchctl remove com.apple.CommCenter
bbupdater -v

i have owned a iphone since the 1st week of October. I used the guides here on MMI to upgrade from 1.0.2 to 1.1.1. Now i would like to upgrade to 1.1.2. It says since i have owned an iphone prior to 11/9 that i can skip this step, regardless of what my bbupdater is? So i just update without checking the bbupdater cause it should be okay?

i looked in the /usr/bin folder and there is no bbupdater there is that a problem?

Thank you for all your help

Rudy

[xandili]

Originally Posted by saru96

i have owned a iphone since the 1st week of October. I used the guides here on MMI to upgrade from 1.0.2 to 1.1.1. Now i would like to upgrade to 1.1.2. It says since i have owned an iphone prior to 11/9 that i can skip this step, regardless of what my bbupdater is? So i just update without checking the bbupdater cause it should be okay?

i looked in the /usr/bin folder and there is no bbupdater there is that a problem?

Thank you for all your help

Rudy

The bbupdater is the file you need to copy manually into your iPhone to /usr/bin to be able to execute the command bbupdater -v and check your bootloader version, it means you can skip this step regardless of what your bootloader not bbupdater is!
What it basically means is that your phone when purchased before 11/9 will have the old bootloader 03.09. and you can proceed with the guide. Phones purchased after 11/9 will have the new bootloader 04.06. what is not unlockable as of right now!

[cbrluv]

i tried independence and it didnt work.

[xandili]

Originally Posted by cbrluv

i tried independence and it didnt work.

After you got the error in iTunes what did you do? Did you restore again? Did you set up iNdepedence to work with iTunes 7.5?