+ Reply
Page 5 of 11 FirstFirst ... 34567 ... LastLast
Results 81 to 100 of 207

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: Ultimate Jailbreaking Guide for All Firmwares

is a discussion within the

iPod Touch Jailbreak / Upgrade / Downgrade / Restore

forums, a part of the

iPod Touch

section;
cheers mate. didn't know about the source. thank you very much. it worked like a charm
...
  1. #81
    What's Jailbreak?
    Join Date
    May 2010
    Posts
    5
    Thanks
    1
    Thanked 0 Times in 0 Posts

    cheers mate. didn't know about the source. thank you very much. it worked like a charm

  2. #82
    What's Jailbreak?
    Join Date
    Aug 2008
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts

    is it possible to Jailbreak my neighbors itouch on my computer she needs help
    if so what do I need to know and do, she has a 2gen 3.1.2 MBversion I believe.
    Thanks
    Last edited by Isquirt; 06-26-2010 at 08:17 PM.

  3. #83
    Green Apple
    Join Date
    Jan 2010
    Posts
    67
    Thanks
    4
    Thanked 4 Times in 4 Posts

    hi, i got a problem here with my itouch 3g. last night, i fell asleep with it on so i think it ran out of battery. anyway, when i woke up, it was off, and upon turning it on it went to the recovery screen (note: its blackra1ned on 3.1.2) and i ran blackra1n on it to tethered boot. geohot's picture came, went super bright, and the screen went black...im thinking it turned off. i turned it on again and tried again, but to no avail. i even tried redsn0w 9.2 and 9.4 and the recovery pic went super bright and then just off like with blackra1n. please help me with this ASAP, cuz u r the experts.

  4. #84
    What's Jailbreak?
    Join Date
    Jul 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default please please help.... ipod touch 3g
    Dear All,

    I just bought an ipod tpouch 3g 32gb, it came with 3.13 firmware i did a jailbreak with spirit, and when opened up CYDIA, i selected the CYDIA option "MAKE MY LIFE EASIER". and after that i updated to ios 4.0 and now i am stuck, need a JAILBREAK VERY BADLY. PLEASE ADVICE.....

    WILL BE VERY HIGHLY APPRECIATED.

    REGARDS
    RONNIE SEN


    Dear All,

    I just bought an ipod tpouch 3g 32gb, it came with 3.13 firmware i did a jailbreak with spirit, and when opened up CYDIA, i selected the CYDIA option "MAKE MY LIFE EASIER". and after that i updated to ios 4.0 and now i am stuck, need a JAILBREAK VERY BADLY. PLEASE ADVICE.....

    WILL BE VERY HIGHLY APPRECIATED.

    REGARDS
    RONNIE SEN
    Last edited by ron2k_in; 07-08-2010 at 06:59 AM. Reason: Automerged Doublepost

  5. #85
    What's Jailbreak?
    Join Date
    Nov 2009
    Posts
    22
    Thanks
    0
    Thanked 5 Times in 5 Posts

    Search on google how to downgrade from 4.0 a website should give u a some sort of a code that will link to the Cydia sever

  6. #86
    Green Apple
    Join Date
    Jan 2010
    Posts
    67
    Thanks
    4
    Thanked 4 Times in 4 Posts


  7. #87
    What's Jailbreak?
    Join Date
    Jul 2010
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Hi I have an iPod Touch 2nd gen MC model, and i never jailbroke it before. Is it possible to downgrade the firmware to 3.1.2, save the SHSH blobs, then upgrade again to jailbreak my iPod? If it's possible please tell me what to do and which jailbreak to use
    Thanks

  8. #88
    What's Jailbreak?
    Join Date
    Jul 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Hi! I recently updated my ipod Touch 3rd generation to the new 4th version and wonder if its still possible to jailbreak it and wuth what program? Thx
    Last edited by Penetrator; 07-12-2010 at 05:34 PM.

  9. #89
    What's Jailbreak?
    Join Date
    Jun 2010
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Hi had to restore and now have to jailbreak stressed. Big time need help

    How do u add source

    Where do u get *******

    How do u add source
    Last edited by ipmat; 07-21-2010 at 05:34 PM. Reason: Automerged Doublepost

  10. #90
    Green Apple salvadoranaya's Avatar
    Join Date
    Jul 2010
    Posts
    32
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Hi guys can i jailbreake my ipod 3g i just apgrade. Software to 4.0 and i cant find the rigth jailbreaker

  11. #91
    The Gem of your Mind MindGem's Avatar
    Join Date
    May 2010
    Posts
    1,307
    Thanks
    229
    Thanked 198 Times in 154 Posts

    Is it untethered?

  12. #92
    iPhone? More like MyPhone Timka21105's Avatar
    Join Date
    Nov 2009
    Posts
    102
    Thanks
    7
    Thanked 5 Times in 5 Posts

    Yes

    Quote Originally Posted by Penetrator View Post
    Hi! I recently updated my ipod Touch 3rd generation to the new 4th version and wonder if its still possible to jailbreak it and wuth what program? Thx
    "the new 4th version"?
    you mean the one that isn't even announced yet?
    Last edited by Timka21105; 08-08-2010 at 08:24 PM. Reason: Automerged Doublepost
    Tima Kudinov

  13. #93
    Green Apple
    Join Date
    Jan 2010
    Posts
    67
    Thanks
    4
    Thanked 4 Times in 4 Posts

    4th version meaning ios4
    go to jailbreakme.com

  14. The Following User Says Thank You to akash86 For This Useful Post:

    Dancergirl (08-26-2010)

  15. #94
    Green Apple
    Join Date
    Aug 2010
    Posts
    46
    Thanks
    2
    Thanked 0 Times in 0 Posts

    Can OP update this sticky with 4.0 and 4.0.1? Yes, I know, but everyone else is starting to ask questions again and this IS what this post was intended to prevent.

  16. #95
    What's Jailbreak? richyrich79's Avatar
    Join Date
    Jul 2010
    Location
    Oklahoma
    Posts
    8
    Thanks
    0
    Thanked 2 Times in 1 Post
    I have a iPod Touch 2G with 3.1.3(7E18) on it.
    The serial is 8M0229XXXXX and the model is MC086LL.

    Can I jailbreak this device??
    If so, what steps do I need to take?

    Any help is greatly appreciated.

  17. #96
    What's Jailbreak?
    Join Date
    Aug 2010
    Posts
    6
    Thanks
    0
    Thanked 8 Times in 2 Posts

    Do you have any jailbreak for iPod touch 4.2. ?
    I don't know how to downgrade it and tiny umbrella is hard to use for downgrade.

  18. The Following User Says Thank You to Cough2day For This Useful Post:

    Makmendes (08-23-2010)

  19. #97
    What's Jailbreak?
    Join Date
    Aug 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    nead help 2 downgrade my ipod help?

  20. #98
    Green Apple holygamer22's Avatar
    Join Date
    Dec 2009
    Location
    somewhere warm and wet
    Posts
    33
    Thanks
    47
    Thanked 2 Times in 2 Posts

    Quote Originally Posted by bteamer View Post
    This guide will end all need for another jailbreaking guide everytime a new firmware comes out. It encompasses the jaibreaking process for every firmware using PwnageTool or WinPwn. I will try to update as soon as a new firmware comes out, but it may take me a couple days with school and everything. I am going to say iPod throughout this guide since it is in an iPod Touch forum, but I'm pretty sure all of these will work with iPhones.

    Jailbreaking 1.1.1
    This is the most simple jailbreak of all the firmwares. Simply navigate to JailbreakMe on your iPhone or iPod Touch.

    Jailbreaking 1.1.2
    1. Navigate to here on your computer.
    2. Download the file and open it (You need winRAR to extract it).
    3. Close iTunes
    4. Right click on the bottom bar and choose task manager.
    5. click on the processes tab and close all processes having to do with apple. (iTunes Helper, AppleMobileDeviceService, iPodervice)
    6. Connect iPod to computer (if iTunes opens, close it)
    7. Open that folder that you downloaded
    8. If you are a windows user, click on windows.bat. If you are a mac user, jailbreak.jar.
    9. Then follow the onscreen instructions.
    Your iPod/iPhone is now jailbroken.

    Jailbreaking 1.1.3
    The easiest way to jailbreak your 1.1.3 iPod Touch is with Ziphone. I think that there are ways to jailbreak it, but they involve downgrading to 1.1.2, jailbreaking, and then using iBrickr. You may be able to use iBrickr to jailbreak it straight, but I dont know. Sorry. I dont like Ziphone either.
    Steps for Ziphone:
    1. Navigate to ziphone.org on your computer
    2. Scroll down and click on download Ziphone (Main)
    3. Then if you are on windows, click the beg windows sign. Mac, click the big apple. Not that hard.
    4. If you have an iPod touch, then plug it in and click on jailbreak.
    5. Follow the onscreen instructions. (There really shouldn't be any.)
    Steps for downgrading and using iBrickr:
    1. Downgrade to firmware 1.1.2 and jailbreak it with the guide right above.
    2. Download iBrickr. (Google for the download)
    3. Open the folder and run the program iBrickr
    4. Click Check my Phone (WARNING: Can take up to 30 minutes on a reaaally slow computer)
    5. Then follow all onscreen instructions.
    6. After that is finished, open Installer on you iPod.
    7. Open All Packages
    8. Click on 1.1.3 Soft Upgrade and install it
    9. Then youre jailbroken 1.1.3!
    P.S. If you want the app pack for free, those are warez so we can't talk about them here, but I will say one thing. Google is powerful.

    Jailbreaking 1.1.4
    There are many ways of doing this. I am going to cover the main one for windows and the main one for Apple.
    Windows:
    1. Download WinPwn. MAKE SURE IT IS LESS THAN 2.5. 2.5 IS ONLY FOR FIRMWARE 2.0 AND UP.(Google.)
    2. Download the 1.1.4 iPod Touch firmware somewhere off the internet. (Once again. Google.)
    3. Connect you iPod and close iTunes.
    4. Open WinPwn
    5. Click Browse .ipsw
    6. Find and select your previously downloaded .ipsw file
    7. Once it says ready, make sure your iPod is connected. Do not disconnect after this step.
    8. Then click iPwner. This unmounts your filesystems and enables it for read/write access (so basically installing apps)
    9. White text will appear on your device. This is normal
    10. After that, winpwn will say your device is succesfully pwned. Now its time to make custom firmware
    11. Click Custom .ipsw
    12. If they aren't already, add these packages: BSD Subsystem, Installer, and Cydia.
    13. If you want custom boot logos, you can change those, if not, leave em alone.
    14. Then click build custom .ipsw. This should take about 15 to 20 minutes.
    15. After it's done, open iTunes, shift+click on restore, and select the custom .ipsw file you just created.
    16. It should restore with custom firmware
    IMPORTANT!!! Before you open installer or Cydia, open contacts, type some random contacts and numbers, open notes, type random stuff, and open safari. Then your iPod is good to go. You freeze your iPod if you open Installer first.
    Apple:
    1. Download PwnageTool
    2. Extract it and launch it.
    3. Tell it yes to automatically check for an update
    4. Download the 1.1.4 ipsw file from somewhere on the internet.
    5. Click browse for .ipsw
    6. Find the file you just downloaded and click on it.
    7. After it's done, click iPwner
    8. When it asks, put your iPod in recovery mode. Do this by turning it off. Hold the home button while connecting it to your computer. Hold it until the cable pops up.
    9. Wait for iPwner to work.
    10. After your iPod has rebooted, click build custom ipsw
    11.This should take about 15 to 20 minutes.
    12. After it's done, open iTunes, shift+click on restore, and select the custom .ipsw file you just created.
    13. It should restore with custom firmware
    IMPORTANT!!! Before you open installer or Cydia, open contacts, type some random contacts and numbers, open notes, type random stuff, and open safari. Then your iPod is good to go. You freeze your iPod if you open Installer first.

    Jailbreaking 2.0
    With this, there are different ways you can go. Winpwn 2.5 for windows, or PwnageTool for Macs. Also, you can use Quickpwn for both. Since Quickpwn is kinda self explanatory, I'm going to do a guide on Winpwn and Pwnagetool.
    Winpwn:
    1. Download Winpwn 2.5
    2. Download the 2.o iPod .ipsw file off the internet
    3. Open Winpwn

    4. Click on Expert Mode to turn it on.
    5. Choose the device you are using (iPod Touch in our case)
    6. Click on the firmware file you downloaded and then continue (2.0 for us)

    7. Thumbs up to the Youtube Activation

    8. Thumbs up to Cydia

    9. Thumbs up to Installer

    10. Thumbs up to resize partition data

    10. Thumbs down wipe data

    11. thumbs up to custom boot logos

    11. Move the slider to 600 mb partition size for iPod

    12. Choose your custom boot logos

    13. Then save the custom .ipsw where you will be able to find it again
    14. It will now start searching for the original firmware file you downloaded

    15. If it can't find it, you have to manually browse for it.
    16. Then it will start to create you're custom firmware.




    16. Then connect via USB and turn off
    17. Then click the green OK to start Pwnage
    18. Then it will show you the steps for DFU mode. Follow these EXACTLY
    19. Then it will Pwn your iPod.
    20. When it's done, iTunes will say it's in recovery mode.
    21. Shift+Click on Restore, and find where you saved your CUSTOM .ipsw file. Open it.


    22. Now it's jailbroken!
    Apple:
    1. Download PwnageTool
    2. Extract it and launch it.
    3. Download The 2.0 iPod Touch firmware off the internet.
    4. Click on iPod Touch
    5. Select the iPod touch 2.0 Firmware
    6. Click yes
    7. Wait while it builds the file...
    8. If you have pwned your iPod before, click yes
    9. If no or you dont know, click no
    10. Follow the instructions if no
    11. When it says it is finished, put iPod in recovery mode and open iTunes
    12. Apple+click on restore and select the custom firmware file you just made.
    13. Wait for it to restore and VOILA! jailbroken 2.0!

    Jailbreaking 2.0.1/2.0.2
    2.0.1 and 2.0.2 are so similar, I'll just use them together. Wherever I write 2.0.x, use the number of your firmware where I put the x. I'll use Pwnagetool and WinPwn again. I'm too lazy to put all of the screenshots in, so follow the screenshots above if you need help. Please use common sense and substitute 2.0.x in for 2.0.
    Windows:
    1. 1. Download Winpwn 2.5
    2. Download the 2.o.x iPod .ipsw file off the internet
    3. Open Winpwn
    4. Click on Expert Mode to turn it on.
    5. Choose the device you are using (iPod Touch in our case)
    6. Click on the firmware file you downloaded and then continue (2.0.x for us)

    7. Thumbs up to the Youtube Activation
    8. Thumbs up to Cydia
    9. Thumbs up to Installer
    10. Thumbs down wipe data
    11. Move the slider to 600 mb partition size for iPod
    12. Choose your custom boot logos
    13. Then save the custom .ipsw where you will be able to find it again
    14. It will now start searching for the original firmware file you downloaded
    15. If it can't find it, you have to manually browse for it.
    16. Then connect via USB and turn off
    17. Then click the green OK to start Pwnage
    18. Then it will show you the steps for DFU mode. Follow these EXACTLY
    19. Then it will Pwn your iPod.
    20. When it's done, iTunes will say it's in recovery mode.
    21. Shift+Click on Restore, and find where you saved your CUSTOM .ipsw file. Open it.
    22. Now it's jailbroken!
    Apple:
    1. Download PwnageTool
    2. Extract it and launch it.
    3. Download The 2.0.x iPod Touch firmware off the internet.
    4. Click on iPod Touch
    5. Select the iPod touch 2.0.x Firmware
    6. Click yes
    7. Wait while it builds the file...
    8. If you have pwned your iPod before, click yes
    9. If no or you dont know, click no
    10. Follow the instructions if no
    11. When it says it is finished, put iPod in recovery mode and open iTunes
    12. Apple+click on restore and select the custom firmware file you just made.
    13. Wait for it to restore and VOILA! jailbroken 2.0.x!

    Jailbreaking 2.1
    Right now, you can only use quickpwn on windows. So...yeah.
    Windows:
    1. 1. Download quickpwn
    2. Download the 2.1 iPod .ipsw file off the internet
    3. Open quickpwn
    4. It should immediately begin searching for you're firmware


    5. Check Cydia
    6. Check Installer
    7. Check custom boot logos

    8. Make sure you're connected

    9. Then it will show you the steps for DFU mode. Follow these EXACTLY (Be ready, the steps move quickly)

    10. Then it will Pwn your iPod.



    11. Then it will say that you're device has been succesfully pwned.

    12. Now it's jailbroken!
    Apple: (sorry I dont have a mac so this is the best I could do.)
    1. Download QuickPwn 2.1
    2. Download youre 2.1 firmware file off the internet
    3. Open Quickpwn
    4. Follow the onscreen instructions
    It should be easy. Look above to the other guides to see how to do the custom firmware and ipwner stuff.

    2.2
    This one will be mainly for a mac using quickpwn. You can use PwnageTool too. Windows can use Quickpwn or Jailbird.

    1. Download and open quickpwn

    2. Click OK, connect your device, then click OK again.

    3. If it does not automatically do it, then select your device and click continue.
    4. Quickpwn will search for the firmware that you are trying to jailbreak. If you downloaded it through iTunes, then it will find it.
    5. If it can't find it, then browse and find it manually.
    6. Then choose your install options. You will be prompted to put your device into DFU mode. Follow the instructions exactly
    7.It will jailbreak, and reboot
    8. Wait for it to finish its processes. You may have to reboot again.
    Congratulations! (Sorry for the lack of screenshots, didn't want to repwn and lose my stuff)

    2.2.1

    1. Download Quickpwn for Mac here
    2. Connect your device to iTunes
    3. If you are not on 2.2.1, click restore, and it should restore your device and update it to 2.2.1 at the same time
    4. Open Quickpwn
    5. Click OK
    6. Select your device and hit the blue arrow
    7. Quickpwn should automatically detect the firmware if you downloaded it through iTunes
    8. Browse and select it if you downloaded it to a seperate location and hit the blue arrow
    9. Then Quickpwn will give you the options to remove Installer and Custom Boot logos
    Note: Cydia is mandatory, cannot be unchecked. I personally recommend unchecking Installer and custom boot logos too. Installer is useless and you can use LogoMe after jailbreak to change boot logos.
    10. It will now create your custom firmware.
    11. After it is done, it will ask you if your device has been pwned before. If you are unsure. CLICK NO. However, if you are confident that you have used pwnagetool/quickpwn before, hit no.
    12. If you hit no, then place your device into DFU mode
    13. Then in iTunes, press option+click on restore, then find the custom firmware that you saved from quickpwn.
    14. Select it and it should restore to custom firmware. And you're done!
    15. If you clicked yes then:
    A. Make sure your device is connected via USB cable
    B. Now the most important step. Follow the instructions to put your device into DFU mode exactly. Here are the instructions:
    i. Turn your device off
    ii. Hold the home button for 5 seconds
    iii. Hold home and sleep buttons for 10 seconds
    iiii. Release sleep and hold home button until a popup appears in iTunes saying an iPhone/iPod has been connected in restore mode and must be restored.
    IMPORTANT NOTE:
    YOU CANNOT PUT YOUR DEVICE INTO DFU MODE IN MAC OS X LEOPARD 10.5.6. You can follow the one persons instructions here on how to fix it. Not for the beginning jailbreaker. Make sure you know something about computers.
    16. Then you can option+click restore in iTunes, and choose your custom firmware that quickpwn built.
    Then you're done!

    Jailbreaking 3.0
    3.0 is a tad different than the other firmwares. If you used quickpwn before, you now have to use Redsn0w 3.0. (PwnageTool is the same, just newer version). This guide is for Redsn0w. Dunno if I'll get around to PwnageTool. :/
    1. Download redsn0w 3.0 from the dev-team's blog.
    2. Download the 3.0 iPod Touch firmware either through iTunes or off the internet.
    3. Start RedSn0w.
    http://www.grabup.com/uploads/862f51...5fc0ba5486.png
    4. Browse for the firmware you downloaded
    http://www.grabup.com/uploads/b622e9...1807063095.png
    5. Your .ipsw should be identified properly. If it's not, you've got issues.
    http://www.grabup.com/uploads/8db0e0...8fe7a058a4.png
    6. It should run through a few quick processes by itself.
    http://www.grabup.com/uploads/63560c...d07a03138f.png
    7. The oldish version of RedSn0w should only have one option, which is to install Cydia. If you installed the newer redsnow, then you should have another option to add ultrasnow.
    http://www.grabup.com/uploads/cb0d98...ba7f922dea.png
    8. Then it'll tell you to make sure your phone/ipod is off and connected. Guess what. Turn off your phone and connect it. :P
    9. Follow the steps for DFU EXACTLY.
    "http://www.grabup.com/uploads/22c1299ad7dd2cb0ac2ae0cca0718b2a.png
    http://www.grabup.com/uploads/9fc985...69d74cf186.png
    http://www.grabup.com/uploads/915679cc9500bc9e87b5e49a12219369.png"
    10. It should run through steps, and you should be done!
    IMPORTANT:
    There are a couple of known bugs. If your phone/iPod gets stuck at the FIRST "Waiting for reboot" step, then cancel the process, unplug your device, plug it back it, and run the program again. If it gets stuck at the SECOND "Waiting for reboot", then quit the program and re run it. At the end of the steps for DFU, KEEP HOLDING THE HOME BUTTON. Hold it all the way through till it says "updating ramdisk". Then you should be good.
    If I forgot anything, please post to let me know.
    you should update this to support the latest FWs

  21. #99
    Super Moderator Cer0's Avatar
    Join Date
    Apr 2008
    Location
    MN/WI
    Posts
    14,005
    Thanks
    388
    Thanked 1,141 Times in 891 Posts

    Quote Originally Posted by holygamer22 View Post
    you should update this to support the latest FWs
    There updated:

    Jailbreaking 4.0 & 4.0.1 & iPad 3.2.1
    This is the most simple jailbreak of all the firmwares. Simply navigate to JailbreakMe on your iPhone, iPod Touch, or iPad.


  22. #100
    What's Jailbreak?
    Join Date
    Sep 2010
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    How to jailbreak 4.0.2

+ Reply
Page 5 of 11 FirstFirst ... 34567 ... LastLast
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts