[Linux4me]

problem is its only beta. Not the full application. So if your not a pro or know what u are doin don't dl it.

[cajun1689]

i have used this on the 2.0 software but i cant get the app store or i tunes to show. plz help

[iJuice]

Originally Posted by Argo_Rei

try doing a clean restore first, then pwning

almost forgot...fantastic work guys!!!

*bows down before the dev team*

My iPhone is 1.0.2 Unlocked and Jailbroken.
I assume I have to clean restore to use the PwnageTool. However I'd like to be sure I'd be doing it correctly. I've looked around the Guides on this site and have not been able to find one that specifies 1.0.2 clean restore.

The end result I'd like is to upgrade from 1.0.2 (jailbroken and unlocked) to a clean, jailbroken, unlocked 1.1.4.

Can anyone point me in the right direction?

[Linux4me]

Originally Posted by iJuice

My iPhone is 1.0.2 Unlocked and Jailbroken.
I assume I have to clean restore to use the PwnageTool. However I'd like to be sure I'd be doing it correctly. I've looked around the Guides on this site and have not been able to find one that specifies 1.0.2 clean restore.

The end result I'd like is to upgrade from 1.0.2 (jailbroken and unlocked) to a clean, jailbroken, unlocked 1.1.4.

Can anyone point me in the right direction?

Are u goin to use the mac version of pwnage or winpwn? Need to know before I can answer you question. But really basically no matter what one you use just update your firmware to 1.1.4 no jailbreak nothin like that unless you are using another carrier but still you can run bootneuter and what ever to unlock the phone. Throw more info at me I can get u up and running

Originally Posted by cajun1689

i have used this on the 2.0 software but i cant get the app store or i tunes to show. plz help

You have go to the parental controls turn them all off then back on should work

[jimbeam4581]

mount disks01 failed. I keep getting this dooring the initial pwning proses. I get this and then it reboots like nothing even happened.

Im on a mac using pwnagetool 1.1. any ideas?

[iJuice]

Originally Posted by Linux4me

Are u goin to use the mac version of pwnage or winpwn? Need to know before I can answer you question. But really basically no matter what one you use just update your firmware to 1.1.4 no jailbreak nothin like that unless you are using another carrier but still you can run bootneuter and what ever to unlock the phone. Throw more info at me I can get u up and running

I'm on a Mac, so I'd be using the Mac pwnage. Also, I'm going to need to unlock as I'm on a different carrier. As well, I'd like to have it jailbroken so I can use 3rd party apps.

When you say to "just update your firmware to 1.1.4". are you saying to just use the straight up iTunes firmware upgrade to 1.1.4? I thought that would brick a jailbroken/unlocked phone?

[jtesnani]

press option and click restore and select 1.1.4 firmware restore .ipsw (you need to download this first if you don't have it)

it doesn't brick your phone. it just brings your phone back to factory settings

[iJuice]

Originally Posted by jtesnani

press option and click restore and select 1.1.4 firmware restore .ipsw (you need to download this first if you don't have it)

it doesn't brick your phone. it just brings your phone back to factory settings

So I just use the "1.1.4 firmware restore .ipsw" that is mentioned in the PwnageTool Guide? Pressing option "restore" in iTunes?

http://www.modmyi.com/wiki/index.php...e_Guide_PWN_It

[jtesnani]

yes, and once your phone is on 1.1.4, you can use pwnage to pwn your phone

oh i just saw that you're at 1.0.2. you should probably revirginize your phone first. i read that depending on your method of unlock while on 1.0.2, like you said, you may brick your phone if you upgrade without revirginizing. you can refer to i.unlock.no for more information on how to revirginize. you may also be able to use ziphone for revirginizing but i'm not 100% certain on that

[imbuggin]

where do you get a user name and password to put in?

[jtesnani]

username and password for what?

[imbuggin]

page "2" after you save you custom .ipsw. The instrustion say the Pwnage tool will start the process of creating a custom Ipsw."When it asks for your user name and password type it and select ok"

where do you get this?

[iJuice]

Originally Posted by jtesnani

yes, and once your phone is on 1.1.4, you can use pwnage to pwn your phone

oh i just saw that you're at 1.0.2. you should probably revirginize your phone first. i read that depending on your method of unlock while on 1.0.2, like you said, you may brick your phone if you upgrade without revirginizing. you can refer to i.unlock.no for more information on how to revirginize. you may also be able to use ziphone for revirginizing but i'm not 100% certain on that

Ok, so I restored to the 1.1.4 firmware and I'm following the Pwnage guide and I've successfully made it to the step where you have to boot iTunes and restore to the custom 1.1.4 firmware. However, instead of getting this screen
http://www.modmyi.com/images/pwnagetool/pwn14.png

I'm getting a screen that says:
"The SIM card inserted in this iPhone does not appear to be supported."

I can't seem to get to the screen to restore....do I have to put the AT&T SIM in to do this?

[jtesnani]

Originally Posted by imbuggin

page "2" after you save you custom .ipsw. The instrustion say the Pwnage tool will start the process of creating a custom Ipsw."When it asks for your user name and password type it and select ok"

where do you get this?

you have a mac, correct? it's your username and password for your mac, like how it always asks you for a password when you install an update, etc

Originally Posted by iJuice

Ok, so I restored to the 1.1.4 firmware and I'm following the Pwnage guide and I've successfully made it to the step where you have to boot iTunes and restore to the custom 1.1.4 firmware. However, instead of getting this screen
http://www.modmyi.com/images/pwnagetool/pwn14.png

I'm getting a screen that says:
"The SIM card inserted in this iPhone does not appear to be supported."

I can't seem to get to the screen to restore....do I have to put the AT&T SIM in to do this?

you need to put your phone in recovery mode so itunes detects it in recovery and asks you to restore

[iJuice]

Originally Posted by jtesnani

you need to put your phone in recovery mode so itunes detects it in recovery and asks you to restore

I believe it is in recovery mode. It's the screen that looks like the usb cable and itunes logo and the slide for emergency slider.

Is that not the recover mode? If not....how to I put it into recovery?