Free Unlock running 1.1.1 with a 1.0.2 baseband

**Cody Overcash** · 10-12-2007, 01:23 PM

Originally Posted by bkbiggs

well, I'm not able to get the FLS to take... and the phone does not recognize my Cingular(ATT) sim now.

I know... I know...

you are using this pack right

http://www.modmyi.com/forums/downloa...o=file&id=1085

the one p_f linked to in the first post was crap . . . secpack was not correct, I pulled out secpack from the 1.1.1 f/w and it is included inthe archive I just linked.

oh and the link in the first post to the bad archive has been replaced

**Stevonw** · 10-12-2007, 01:25 PM

PLEASE SOMEONE HELP ME

I'm stuck with the 2nd last part

and yes i had an unlocked v1.02 iPhone unlocked via anySIM and so far everything is working.

I am however stuck on THE BSD PART

Can someone please help me

????????

**bkbiggs** · 10-12-2007, 02:00 PM

I was not using the one from the link - i got corruption messages when I tried to unpack them. I mounted a ramdisk from the unpacked files from the ipsw file, and pulled the eep and fls from there (and gen'd a secpack from the files). I have rebooted my mac, and am still getting a error during extract - I'll try it a couple of different ways...

**Stevonw** · 10-12-2007, 02:10 PM

yay i got the BSD part done following a different guide

**TK1147** · 10-12-2007, 02:11 PM

Thanks Cash great Job !!!

I'm a little stuck on the BSD part, but I'll wait to be complete as the others.

**Cody Overcash** · 10-12-2007, 02:13 PM

yes the bsd and activation guides for osx should be complete tonight (when I get home from work, relax a bit, and work up the energy

)

also a full step by step 1.1.1 unlock guide for osx should be up shortly after that

**bkbiggs** · 10-12-2007, 02:22 PM

Ok, unzipped with a windows box (sorry folks!) and moved the files over, the erase worked much better. flash worked... anySIMing now, as it didn't recognize my ATT sim when I restarted...

and I have my carrier back! Thanks CASH!

**ratik** · 10-12-2007, 02:25 PM

Some one plz help me with the activate stage. all the rest is done but im stuck here. i know ill sound like a fool saying so but i dont know how to perform the following steps:

"Back up v1.1.1's lockdownd:
cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1

Now overwrite the iPhone's copy with your old v1.0.2 copy:

cp /var/root/lockdownd.1.0.2 /usr/libexec/lockdownd"

plz help me im stck here.....

thanku

ratik

**Stevonw** · 10-12-2007, 02:30 PM

Originally Posted by ratik

Some one plz help me with the activate stage. all the rest is done but im stuck here. i know ill sound like a fool saying so but i dont know how to perform the following steps:

"Back up v1.1.1's lockdownd:
cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1

Now overwrite the iPhone's copy with your old v1.0.2 copy:

cp /var/root/lockdownd.1.0.2 /usr/libexec/lockdownd"

plz help me im stck here.....

thanku

ratik

I was at about to ask the exact same thing Ratik, its the final stage for us both and i'm in the same boat as you, clueless on how to do this lol

**bkbiggs** · 10-12-2007, 02:30 PM

Ratik, you need to issue those commands in the ssh terminal window you have opened to your iphone (if I'm not mistaken).

**Gazoo** · 10-12-2007, 02:32 PM

Stevonw

Well, do you have a working 1.1.1 unlock?

**ratik** · 10-12-2007, 02:35 PM

Originally Posted by bkbiggs

Ratik, you need to issue those commands in the ssh terminal window you have opened to your iphone (if I'm not mistaken).

thanx for ritin in bkbiggs but i dont seem to able to know what command to rite in terminal and under what state - hope this makes sense - i mean do i have to change the directory or copy n paste and if it is the latter then i tried that but to no avail.....

**Stevonw** · 10-12-2007, 02:44 PM

Originally Posted by Gazoo

Stevonw

Well, do you have a working 1.1.1 unlock?

I am at the same stage as ratik. At the last stage, where the instructions are vague and i fail to understand them

**ratik** · 10-12-2007, 02:45 PM

Originally Posted by bkbiggs

Ratik, you need to issue those commands in the ssh terminal window you have opened to your iphone (if I'm not mistaken).

this is what my terminal scree looks like on running that command....let me know what am i doing wrong plz

Last login: Sat Oct 13 00:30:06 on ttys001
Macintosh:~ Ratik$ cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1
cp: /var/root/lockdownd.1.1.1: Permission denied
Macintosh:~ Ratik$

**bkbiggs** · 10-12-2007, 02:49 PM

You will need the ip address of your iPhone - check the instructions at the start of this thread. From where you are at you will need to run the command:

ssh -l root

you will get prompted about the fact that you are doing unsafe things and people can sniff you, and other dire warnings... followed by a yes/no prompt. Type "yes" without the quotes.

Then you'll need to enter your root password for the iphone - the default is: dottie

at that point, you should have a terminal session open to the iphone.

If ssh doesn't work, you need to make sure you've already installed the OpenSSH package (I'm assuming you are using apptap to put the installer app on your iphone..) and the BSD Utilities.

Does that help?

**Stevonw** · 10-12-2007, 02:50 PM

Originally Posted by bkbiggs

You will need the ip address of your iPhone - check the instructions at the start of this thread. From where you are at you will need to run the command:

ssh -l root

you will get prompted about the fact that you are doing unsafe things and people can sniff you, and other dire warnings... followed by a yes/no prompt. Type "yes" without the quotes.

Then you'll need to enter your root password for the iphone - the default is: dottie

at that point, you should have a terminal session open to the iphone.

If ssh doesn't work, you need to make sure you've already installed the OpenSSH package (I'm assuming you are using apptap to put the installer app on your iphone..) and the BSD Utilities.

Does that help?

what lol? this is 1.1.1 were talking about - the instructions & methods are dif and the password is now alpine

**ratik** · 10-12-2007, 02:55 PM

ok i did ssh in to my phone and got this

"Macintosh:~ Ratik$ ssh -l root 192.168.2.113
[email protected]'s password:
-sh-3.2# cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1
-sh-3.2#
" now what do i do????

and i have come to this stage after installing the bsd and ssh mentioned in the thread posted here....basically i have jailbreaked just cant activate 1.1.1

**Stevonw** · 10-12-2007, 02:56 PM

Originally Posted by ratik

ok i did ssh in to my phone and got this

"Macintosh:~ Ratik$ ssh -l root 192.168.2.113
[email protected]'s password:
-sh-3.2# cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1
-sh-3.2#
" now what do i do????

and i have come to this stage after installing the bsd and ssh mentioned in the thread posted here....basically i have jailbreaked just cant activate 1.1.1

thats where ive been at for the past 40 mins, not sure if it actually copys or, if it does then where does it go :P ?

**ratik** · 10-12-2007, 02:57 PM

man some images would have been a treat in the activation stage....

**Stevonw** · 10-12-2007, 03:00 PM

Originally Posted by ratik

man some images would have been a treat in the activation stage....

Give cash a break, he said he would do it last tonight if he has time.

He sorted it all out and got us this far

Thread: Free Unlock running 1.1.1 with a 1.0.2 baseband

LinkBack

Thread Tools

Display

The Following User Says Thank You to Cody Overcash For This Useful Post:

Can not Activate

The Following User Says Thank You to bkbiggs For This Useful Post:

The Following User Says Thank You to Stevonw For This Useful Post:

Posting Permissions