Free Unlock running 1.1.1 with a 1.0.2 baseband

[Sjoho]

I have 1.0.2 and unlocked it with the newest anySim. Where shall I start?

Is Installer.app working under 1.1.1 already?

[joyce]

hey bluegopher,

I had the same situation, this is a brief summary of what i did (using only modmyi.com guides):
1st - Downgraded my firmware to 1.0.2.
2nd - Activate my iphone with a non at&t sim using independence only after you check you have 1.0.2
3rd - Install BSD Subsystem and Open SSH.
4th - downgrade your baseband
5th - unlock iphone using anysim.

right now i have no interest at all to upgrade to 1.1.1 since i am in venezuela and i cannot access wifi itunes.

hope this helps.

hi pls teach me how to activate. ive got an otb i.i.1 phone. did everything smootly up to jailbreak. IM STUCK WITH ACTIVATE. help anyone? thanks

hi can you pls teach me how to activate 1.1.1? thanks

[christianromanelli]

Christian,

Therefore, if I just follow this tuturial it should all be good? You followed this step by step and now your new 1.1.1 iphone has a 1.0.2 baseband with all the apps and calling functions working perfectly? I really don't care for the 1.1.1 update, I just want my iphone working, with which ever version....

Thanks!!

bluegopher,

i followed all the steps in the guide with absolutely no problem until i finished the baseband downgrade, after that i decided i could live with 1.0.2 for a good time then i unlocked the iphone using anysim.

[guyverunit]

and im still confused.....is there a guide to update to 1.1.1 for people that have there phone already unlocked and are still using 1.0.2? or should we not be doing any of this as it's for bricked phones?

*sigh*

[frogmella]

To all those having problems with the activation part of the process:

YOU MUST SWAP YOUR (USELESS) AT&T SIM FOR THE ONE YOU INTEND TO USE BEFORE YOU RUN IASIGN

I was beating my head against a brick wall with this one for a while!

[ratik]

hey can u plz let me know how did u perform the steps in activation before you got to the activation part.....

Back up v1.1.1's lockdownd:

cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1

Now overwrite the iPhone's copy with your old v1.0.2 copy:

cp /var/root/lockdownd.1.0.2 /usr/libexec/lockdownd

And upload the certificate included in this distribution:

scp iPhoneActivation.pem root@[IPHONE IP]:/System/Library/Lockdown/

thnax

[ledude]

Just wanted to let anyone that care know that I have succesfully rolled back to 1.0.2 & unlocked my out-of-the-box iphone with 1.1.1

thanks again for this guide! definately helped me out bigtime!

[diox]

i do all the steps of downgrading!!
i have an iphone here... i think it has problem
when i type ./ieraser
it freeze in waiting for data.. i wait like an hour.. and still there
i've unlocked like 6 1.1.1 to 1.0.2 and it worked for me..
but this phone is giving me problem..
does anyone can help!?

[Zer0]

upgraded Iphone = downgraded again and unlocked successfully
New Iphone with 1.1.1 = downgraded and unlocked successfully

Tools=
Macbook Intel Coreduo
This Guide
30 minutes
3 beers
1 pizza

[diox]

im on win

[solidunit]

i followed the steps to "relock" my phone by reflashing the baseband, and now my phone get 0499999... IMEI whenever i stick my att sim in.

Yes, I unlocked with anysim even though i was an att subscriber just for experimentation purposes.

DO NOT mess with your baseband if you have used anysim to unlock, PERIOD. There should be (more specific) disclaimers on these howtos, dangerous stuff.

[JedixJarf]

i followed the steps to "relock" my phone by reflashing the baseband, and now my phone get 0499999... IMEI whenever i stick my att sim in.

Yes, I unlocked with anysim even though i was an att subscriber just for experimentation purposes.

DO NOT mess with your baseband if you have used anysim to unlock, PERIOD. There should be (more specific) disclaimers on these howtos, dangerous stuff.

Just run anysim again and your phone will work fine with the correct imei.

And for your disclaimer read the first post.

You may not want to try this until the method has been perfected. If you don't know what you're doing don't Try this. It works, but if you mess up at all you will corrupt the baseband beyond repair. If you are patient you can wait until The Dev Team updates anysim to work on the 1.1.1 or another 1.1.1 app is created

[ratik]

hey..

is it ok to activate the iphone v. 1.1.1 using the windows method after having jailbroken and installing ssh and bsd with the mac.

i can not activate with the mac method as i do not know how to execute the following steps:
Back up v1.1.1's lockdownd:

cp /usr/libexec/lockdownd /var/root/lockdownd.1.1.1

Now overwrite the iPhone's copy with your old v1.0.2 copy:

cp /var/root/lockdownd.1.0.2 /usr/libexec/lockdownd

And upload the certificate included in this distribution:

scp iPhoneActivation.pem root@[IPHONE IP]:/System/Library/Lockdown/

Now:

killall lockdownd

thanks for your help

ratik

[solidunit]

Just run anysim again and your phone will work fine with the correct imei.

And for your disclaimer read the first post.

My problem with the disclaimer is that it reads like "if you follow this procedure correctly and to the letter and do not screw up, it should work". It should read more like "if you try this method, your phone may be screwed EVEN if you followed the instructions correctly (ie, if you've previously unlocked via a freely available solution)"

But thats neither here nor there, I took a risk and rightly got burned, completely my fault.

I kind of thought that running anysim again would get me working, but I think i'll wait for a real solution from iphone dev team instead of further possibly corrupting my baseband.

[mdiersma]

I managed to go through all steps... but 1
Now i'm on 1.1.1 and activated. But the baseband firmware is 4.x
I wanna downgrade the baseband to 3.14 but ieraser gives me a hard time.
It sais, waiting for data.

Does anybody know what to do next ?
I would like to have an 1.1.1. unlocked

[mofolo]

Its been days and there is still no noobie guide!

By the time we get a one click jailbreak/unlock method it'll be 1.1.2 time!

[the_unknown]

It's not that hard to follow the guide... I've virginized my phone, upgraded to 1.1.1, jailbroke, installed SSH an BSD, but the activation part is what kills it for me, the guide is vague is where to execute those commands and such. I've repeated the process 4 times and I just can't activate the thing with those set of instructions...

[dale1v]

I'm in the same boat as unknown. Activation steps are not specific enough

[mdiersma]

Try to copy back the 1.1.1 lockdownd in the end. It worked for me.

Regards,

Martijn

[jeetu610]

A simple question: Is it possible to use this guide to upgrade an unlocked (iUnlock) iphone from 1.0.2 to 1.1.1 and then just downgrade the baseband to have a 1.1.1 unlocked phone.

Has anyone had any success?