[mbaharvard]

Originally Posted by PStuLovesCrackk

removed

I think you love crack TOO much! Change happens - get used to it. If you did not JB and you are on AT&T all you have to do is update and sync!! There is no conspiracy against you and Apple will do what Apple does despite your immature protests. Only 10 album arts? Have you heard of the internet?

Oh, and find a way to use discourse WITHOUT profanity! IF your pea brain can muster it I only mention this because this is the way you choose to present yourself - grow up!

[Brainless83]

@mbaharvard : Ok now step by step, First i tried to pwn my iphone from 1.1.4. to 2.0.2. using winpwn 2.5 beta, i created the custom firmware, tried to upload it via itunes on my phone but i got the 1603 error message, how ever, my iphone stayed in DFU mode. So i restored it to the original apple 2.0.2 firmware and of course it was locked on at-t.

Then i created a custom firmware again, usin winpwn in expert mode, i did not use quickpwn...

After the custom firmware was created winpwn crashed, with the usual send or dont send error report message, however the custom firware was in my documents folder.

Until this point my iphone was left hooked on to the usb and the screen was completly white, like i turned on the flashlight app if you know what i mean.

So i started itunes 8.0 and simply tried to upload the custom firmware and a couple of minutes later it was pwned, and unlocked, with cydia and installer on it and of course appstore.

I dunno what i did right or wrong i just tried it out and it works perfectly, youtube works, edge works, wifi works, calender, all my contacts and album coovers were restored, everything was on it like when i had my 1.1.4. firmware, nothing was lost.

[mbaharvard]

Originally Posted by JK1234

Had the same exact problem dont know why apple is being faggotish but anyways i just upgraded and quickpwned just no huge selection of boot logos or partition size I guess

Boot Logos are all there. You just do not have the partition size option but Boss Prefs takes care of that.

[howardlr]

I found the same thing! Connect your iphone as if just syncing and option click on the restore button, select your custom firmware and it works

Originally Posted by reznor9

UPDATE!!!: You dont have to downgrade back to iTunes 7.7
I also am using a mac... I also upgraded to iTunes 8.0... I also was getting the error(1600) when trying to restore a custom pwnage firmware in DFU mode... was getting frustrated and then decided to try it while NOT in DFU mode, and guess what, it worked! Well it did for me, tell me if it does for you please

So there you have it, you do not have to enter DFU mode. Infact in my case the only way to get the custom firmware to install was to do it out of DFU... just in regular mode.
Step my step:
1) Turn on your iPhone
2) Plug it into your computer and allow iTunes to detect it as normal.
3) Now hit option/restore and select the custom firmware
thats it!

If your stuck in DFU mode and dont know how to get out, just hold the sleep and home button at the same time for about 10 seconds... then release both buttons and just hit the sleep button. The phone should power on like normal

[mbaharvard]

Originally Posted by Brainless83

@mbaharvard : Ok now step by step, First i tried to pwn my iphone from 1.1.4. to 2.0.2. using winpwn 2.5 beta, i created the custom firmware, tried to upload it via itunes on my phone but i got the 1603 error message, how ever, my iphone stayed in DFU mode. So i restored it to the original apple 2.0.2 firmware and of course it was locked on at-t.

Then i created a custom firmware again, usin winpwn in expert mode, i did not use quickpwn...

After the custom firmware was created winpwn crashed, with the usual send or dont send error report message, however the custom firware was in my documents folder.

Until this point my iphone was left hooked on to the usb and the screen was completly white, like i turned on the flashlight app if you know what i mean.

So i started itunes 8.0 and simply tried to upload the custom firmware and a couple of minutes later it was pwned, and unlocked, with cydia and installer on it and of course appstore.

I dunno what i did right or wrong i just tried it out and it works perfectly, youtube works, edge works, wifi works, calender, all my contacts and album coovers were restored, everything was on it like when i had my 1.1.4. firmware, nothing was lost.

Hmmm - a ray of hope for those who have a lot of patience! I am glad you responded with your experience and maybe just perseverance pays off in this matter (it usually does in everything else)! I tried the restore a number of times with the pwned firmware and continued to get the 1600 error until I quickpwned. Let me give your method a try and I'll report back. Were you on a freshly restored iPhone from iTunes 8.0 with the 2.0.2?
iTunes will not let you restore unless you are unlocked and activated from a fresh install of the stock firmware unless you are in DFU mode which, in my experience. iTunes 8.0 doesn't support with pwned firmware (unless y'all know something I don't).

[spaxx]

What if you have a brand new iphone that is now yet pwned? There's no problem with a pwned iphone then restore it in normal way. If you are going to pwned the iphone using itunes 8 for the first time, you need to dfu the phone but there is an error 1600

[Jay316]

Basically, as long as Quickpwn gets updated then there are no problems with iTunes 8.

[spencer785]

Everybody this method works heres what to do run winpwn 2.5 and do a custom firmware then continue with winpwn and do the pwnage button pressing and then winpwn will crash and your iphone screen will turn white go to itunes and then click restore select custom firmware and thats it

[btdesigns]

i had no problem using quickpwn it was great

[A.T]

Has anyone tried restoring a custom firmware on a stock iPhone in recovery mode?
I can't try this as my internet connection is down for next two weeks so until then I'm on iTunes 7.7 and fw 2.0.2.
The dev team will obviously find a new way to pwn iTunes 8.0 or maybe install the firmware through pwnage tool itself.
Btw, Quickpwn will not work on an iPhone that has apps installed from App Store, my iPhone failed to boot at the end of quickpwning every single time when I tried Quickpwning w/ apps but when I quickpwned w/o apps my iPhone was jailbroken in minutes , well that happens to me anyway. Only 5 minutes later Cydia gives my iPhone the " ALOD" *sigh*.

[shivamp]

I knew all along this would happen!

[yoko666]

if u get a 1600 error u just need to re-pwn ur itunes. go into the device support folder and delete anything thats in there. open pwnage/winpwn and pwn itunes again. now it should work.

vista: c:/users//appdata/roaming/%APP%/ITUNES/DEVICE Support
XP: C:/Documents and Settings//Application Data/Apple Computer/iTunes/Device Support
mac: ~/Library/iTunes/Device Support
(Where  is your login-user name)

im not entirely sure about the vista path but it will be something close to that

[Ma5ter]

Or actually you can delete all files in Lockdown folder and no error problems with iTunes8.

CUsers\username\AppData\Roaming\Apple Computer\Lockdown

[luiz]

thats odd... i restored with a custom ipsw with my first gen pwned 2.0.2 to another pwned 2.0.2 ipsw... worked without problems

[applestar]

No, no, no.

Solution is much easier:

Judt delete one file and create a new custom .ipsf file with PwnTool.

Read here:

iTunes 8 and Error 1600 while restoring: Solution! | TwiPhone.com