[revroy]

I get QuickPwn-GUI.exe - Application Error. The application failed to initialize properly (0xc0000135). Click ok to terminate the application.

What gives?

[speedemonV12]

i want mac Version!!

[PhoneLine]

Originally Posted by speedemonV12

i want mac Version!!

Strange seeing that posted.....

This is almost like waking up in the Twilight Zone with the Windows versions coming out before the Mac.

I'm sure it'll be out soon for you guys.

Or you could buy a PC Sorry I had too

[jrentzke]

Originally Posted by revroy

I get QuickPwn-GUI.exe - Application Error. The application failed to initialize properly (0xc0000135). Click ok to terminate the application.

What gives?

I also got that. The fix is to download the latest .NET Framework v3.5

Microsoft .NET Framework 3.0 Community (NetFx3)

Originally Posted by speedemonV12

i want mac Version!!

I successfully did this on my mac using Parallels.

The important thing to do though is to kill the iTunes Helper on the mac side using /Application/Utilities/Activity Monitor.

If you don't, iTunes on the mac side will kick in as soon as Quickpwn tries to do its thing and you'll have to start over again.

But it works!!!!

[cadsii]

dont need to this this anymore...

official jailbreak is out

www.iphone3g-mods.com : GUIDE for Dev's 2.0.2 Jailbreak

[jrentzke]

uhm, your link shows using quickpwn - that's what this thread is about...

[fastcharlie]

Hi guys,

reading through the posts here and at the dev team blog, I *think* I almost figured out what will happen if I use this tool, but I'd like someone who already knows best to give me an answer to a question. Right now, I have a 2G already pwned and neutered (using a different carrier than the original one) with pwnage tool for v2.02 (the version that came out a week ago).

Question:
- as far as 2G phones go, this iTunes 2.02 update doesn't touch the baseband? If the phone is already unlocked (via pwn tool) to any network, this 2.02 update doesn't mess with that?
- If the answer to the above question is "yes", then I believe I fully understand what's going on and will update since quickpwn with give me back the jailbreak and activate the phone.

I hope my doubt is clear and that someone can answer it.

Oh, one final question:
- after upgrading to 2.02 and running quickpwn, since the iphone is jailbroken, all 3rd party apps will (in theory) run ok, right?

Thanks in advance and thanks once again to the dev team!

[kurrupt_1]

Originally Posted by fastcharlie

Hi guys,

reading through the posts here and at the dev team blog, I *think* I almost figured out what will happen if I use this tool, but I'd like someone who already knows best to give me an answer to a question. Right now, I have a 2G already pwned and neutered (using a different carrier than the original one) with pwnage tool for v2_01.

Question:
- as far as 2G phones go, this iTunes 2.02 update doesn't touch the baseband? If the phone is already unlocked (via pwn tool) to any network, this 2.02 update doesn't mess with that?
- If the answer to the above question is "yes", then I believe I fully understand what's going on and will update since quickpwn with give me back the jailbreak and activate the phone.

I hope my doubt is clear and that someone can answer it.

Oh, one final question:
- after upgrading to 2.02 and running quickpwn, since the iphone is jailbroken, all 3rd party apps will (in theory) run ok, right?

Thanks in advance and thanks once again to the dev team!

If you read it correctly then you would understand the implications. But here it is again:

Using QuickPwn does not update the firmware itself, this tool is designed to ‘Pwn’ (the ability to install future custom non-Apple firmwares) , ‘Jailbreak’ and install Installer or Cydia on a given device. If your device is running 2.0.1 and you QuickPwn it, it’ll still be running 2.0.1, although it will now be Pwned and Jailbroken, similarly if your device is running 2.0.2 and you QuickPwn it, it will then be running 2.0.2 but the device will now be Pwned and Jailbroken. It will also activate (not unlock) devices that are being used outside of their intended territories and cannot be activated using iTunes.

If you want to update to 2.0.2 then use the normal iTunes update to get to 2.0.2 and then use QuickPwn to Pwn, Jailbreak and Activate, remember that the 2.0.2 update includes a baseband update for the 3G iPhone, so depending what your long term intentions are for the phone, update wisely, of course in the upcoming PwnageTool application you’ll be able to create a custom ipsw without the baseband update enabled.

[revroy]

Originally Posted by jrentzke

I also got that. The fix is to download the latest .NET Framework v3.5

Microsoft .NET Framework 3.0 Community (NetFx3)



I successfully did this on my mac using Parallels.

The important thing to do though is to kill the iTunes Helper on the mac side using /Application/Utilities/Activity Monitor.

If you don't, iTunes on the mac side will kick in as soon as Quickpwn tries to do its thing and you'll have to start over again.

But it works!!!!

thanks

[fastcharlie]

Originally Posted by kurrupt_1

If you want to update to 2.0.2 then use the normal iTunes update to get to 2.0.2 and then use QuickPwn to Pwn, Jailbreak and Activate, remember that the 2.0.2 update includes a baseband update for the 3G iPhone, so depending what your long term intentions are for the phone, update wisely, of course in the upcoming PwnageTool application you’ll be able to create a custom ipsw without the baseband update enabled.

I admit that with english not being my native language, sometimes its hard to fully understand some stuff, but I'll try harder

Back on subject:
I did read what you included in your post, but when it states that the "2.0.2 update includes a baseband update for the 3G", does that mean it doesn't include a baseband update for the 2G phone? (so it would not touch the network unlock work that bootneuter already applied to my phone)

If so, it means I can simply apply the itunes update, quickpwn and I'll have the phone still unlocked, activated and jailbroken and with 2.02 running?

(my main concern - because of the technical terms - is to ensure I don't end up with a phone locked again to O2 when my network is a portuguese one).

Thanks for your help

[stunna2095]

i did my 3G..this works great. upgraded to the 2.0.2 then quikpwned with 2.0.1 and it works great

[RealRitzcracker]

You know that the iPhone has been permently hacked?
Every new firmware that comes out will be able to be jailbroken.
The PWNAGETOOL and QUICKPWN use a hack at the hardware level.
So the only way to stop it is by making a new iPhone model and revision of the hardware or device software firmware drivers.
So pretty much we will be able to jailbreak 2.0.3 2.0.4 2.5 3.0.0 3.0.1 ALL FUTURE FIRMWARES.
Though phone unlocks could be hard to unlock.
See all the trouble with the 3G?

[fastcharlie]

Originally Posted by stunna2095

i did my 3G..this works great. upgraded to the 2.0.2 then quikpwned with 2.0.1 and it works great

And are you using a different carrier than the one originally associated with your iPhone?

[kurrupt_1]

Originally Posted by fastcharlie

I admit that with english not being my native language, sometimes its hard to fully understand some stuff, but I'll try harder

Back on subject:
I did read what you included in your post, but when it states that the "2.0.2 update includes a baseband update for the 3G", does that mean it doesn't include a baseband update for the 2G phone? (so it would not touch the network unlock work that bootneuter already applied to my phone)

If so, it means I can simply apply the itunes update, quickpwn and I'll have the phone still unlocked, activated and jailbroken and with 2.02 running?

(my main concern - because of the technical terms - is to ensure I don't end up with a phone locked again to O2 when my network is a portuguese one).

Thanks for your help

I have my phone on T-Mobile's network and upgraded to 2.0.2 and it is still unlocked.

[fastcharlie]

Originally Posted by kurrupt_1

I have my phone on T-Mobile's network and upgraded to 2.0.2 and it is still unlocked.

That's exactly what I was hoping to hear Thanks a lot for your comments and help on this

Just updated, no problems whatsoever Everything is running smoothly!

Thanks again.