[Muggz5]

Originally Posted by jjsevilla

plz some help with error (1)

Someone already has, look backwards a few posts, whats up with not reading? We are here to help, but the same redundant questions from people who arent reading isnt holding up your end of the bargain.

[jjsevilla]

I read it and has nothing to do whith my problem , my phone is on DFU but keep saying error (1)

[Muggz5]

I guess I should have asked, are you putting your phone into DFU before you pwn itunes or after? You should have your phone on the locked home screen when you pwn itunes (itunes shuts down). Then you want to put it into DFU mode and reopen itunes and go from there.

[jcrod73]

Originally Posted by jjsevilla

I read it and has nothing to do whith my problem , my phone is on DFU but keep saying error (1)

I use to get ERROR (1) when i was jailbreaking with the last version of winpwn...I was using the wrong firmware version...i have a 3G iphone and i was trying to pwn with iPhone1,1_2.0_5A347_Restore.ipsw when i was suppose to use iPhone1,2_2.0_5A347_Restore.ipsw (again, that was for the last winpwn)...

For those stuck in RECOVERY MODE...I was stuck there too ...luckily i still had my 1st gen iPhone and i swapped my SIM cards...just for the heck of it i tried to just do a normal apple 2.0.1 restore with both iPhones...yea they failed but when i swapped them back i was able to restore my 3G with the normal apple 2.0.1 firmware...i was just glad to have my phone and functionality back ...i had everything backed up so i didn't care if it was wiped...anyways...i was finally able to do a successful winpwn when i did it from a computer that didn't have iTunes or winpwn installed...did a fresh install of iTunes and winpwn...did a fresh custom ipsw file with a 555mb partition and it worked fine...then i just reconnected it with my normal computer and resynced...

Yea...didn't go so smooth this time but i'm just happy i don't have a brick now...

[Vaddy]

I can now confirm that putting my previously pwned(not by ziphone),1.1.4/T-Mobile in recovery mode and doing a shift+click restore to a custom 2.0.1 firmware does indeed work, quick and painless, my iTunes was never pwned either.

[Muggz5]

Originally Posted by Vaddy

I can now confirm that putting my previously pwned(not by ziphone),1.1.4/T-Mobile in recovery mode and doing a shift+click restore to a custom 2.0.1 firmware does indeed work, quick and painless, my iTunes was never pwned either.

Hehehe I hate to say I told you so, but....... anyway way to go!
Ok here are my instructions again I posted, just in case you want to make sure It works and here are the links I promised.


Ok this might help some of you:

This was another phone from a friend we wanted to experiment with.
itunes 7.7.1 , Vista Home, TMobile, 1st Gen 8GB iphone

We took a jailbroken 1.1.4 shift + restore (with phone in normal restore) to factory 1.1.4
Then used winpwn 2.0.0.3 and pwned itunes with a custom 2.0 (already built)
Then shift + restore in DFU (not normal restore) to custom 2.0 (already built)
Then shift + restore (phone in normal restore) to custom 2.0.1 (already built)
Phone is running great, no bugs, cydia and installer working normal.

We still havent had to use the most current winpwn, because we had previously pwned iphones on 2.0 and a simple normal restore mode to custom 2.0.1 we downloaded has worked just fine. Here is the custom 2.0.1 file we have been using I uploaded it last night for these purposes.

All of these files I used mentioned above were either files we created in the past and/or downloaded them via search engines.

Edit: Stay with me on this one, the wrong file(s) were uploaded last night, give me about 4 Hours now Ill get all the files I used uploaded. I am uploading all files I used in this post. So if you have some of these already and can track down the rest try it, I will post them here first thing in the morning.
Re Edit: Here are those files I promised

Custom 2.0.1 2G TMobile
Factory 2.0 2G
Custom 2.0 2G TMobile
Factory 1.1.4 2G

If this works for anyone let others know. This has worked for us with 12 phones.

[jjsevilla]

my iphone is a 3G and I havent use the iPhone1,2_2.0_5A347_Restore.ipsw i was using the last one , this is probably why , thanks a lot , I will let you guys know.

[chus]

I used the new Pwnage Tool (2.0.0.4) yesterday to rise my 1st gen iPhone to the 2.0.1 and everything works great.... I was in 2.0 allready pwnaged with the 2.0.0.3.

I just want to say "thanks" to everybody, is just great to read everybodys experiences to avoid dangerous problems....

The only thing is not working is the Palringo messenger aplication that I´ve downloaded from the AppStore... I´ll try to remove the app and install it again....

I´ll tell you....

[Muggz5]

Originally Posted by jjsevilla

my iphone is a 3G and I havent use the iPhone1,2_2.0_5A347_Restore.ipsw i was using the last one , this is probably why , thanks a lot , I will let you guys know.

Well the file you mentioned above is just firmware 2.0 not the most current-> 2.0.1 keep that in mind.

[Rustynuts]

Well iv never used winpwn before iv always used Ziphone.. was on 2.0 since it was made public, and today id been getting a weird error message, so i thought feck it ill give this winpwn a go. And whay hey first time bish bash bosh unlocked jailbroken, and i have installer back


Just like to say top banana to the dev team...

[jjsevilla]

thanks alot is working now

[lente]

Once again, upgrade to 2.0.1 was completed without a hitch. I dunno about u guys but I never had any of the problems you're mentioning. I followed all the instructions listed to the word and I got it working (calls, sms, youtube, internet, mail, etc).

Just one little problem. When I managed to restore it completely itunes asked me if I wanted to restore it to my original iphone or not (music, videos, contacts, etc) and I selected yes. After a couple of minutes iphone was restarted but itunes kept asking me if I wanted to treat it as a new iphone or not. The third time I gave up and selected to continue as a new iphone and voila! I had still my sms, calls and contacts back... just needed to sync my music unto it.

Some info for you:

- windows xp, sp2
- itunes 7.7.1
- upgraded from pwned firmware 2.0
- ticked cydia, installer and youtube activation fix
- ticked activate iphone, unlock baseband and the neutre 3.9 and 4
- unticked no wipe
- pwned the custom firmware

[richtoyz]

thanks everyone for the benefit of your experiences i am now running 2.0.1 with cydia and installer. I had to restore to 2.0 after i got the error, and build a new firmware with the disk partition set to 800Mb. when i used this firmware it worked perfectly

thanks again

[kamal5one9]

I am trying to jailbreak my 2.0.1 iPod touch and I keep getting a 1601 or 1602 error in iTunes. I might be using the wrong firmware, but I am pretty sure I am not. What is the problem?

[E-Dragon]

Originally Posted by upstateiphone

Unstable for me keeps crashing when almost done building custom ispw... Anyone else have this issue?

Forgot to mention Microsoft forced Vista User.....

Originally Posted by kline1

I have the same problem.

Go to the file WinPwn is writing to and make sure it is empty or write it to another place...