[rrapstarr]

I'm still using Ver. 1.1.1 with the original JailBreak that I bought (man that was rough) can I use this JailBreak on my 1.1.1 vers. iphone on PC? I ask because it says 1.1.4 and 2.0 jailbreak and i have search as much as I could, any help will be appreciated as usual!

Thanks to all the Developers too!

[rlee]

Originally Posted by rrapstarr

I'm still using Ver. 1.1.1 with the original JailBreak that I bought (man that was rough) can I use this JailBreak on my 1.1.1 vers. iphone on PC? I ask because it says 1.1.4 and 2.0 jailbreak and i have search as much as I could, any help will be appreciated as usual!

Thanks to all the Developers too!

I am in the same boat, except I have a ZiPhoned 1.1.3 unlocked, would this work for me? My guess is yes, but I want to make sure before I screw anything up.

can someone please confirm for us that this will work for us as well? thanks.

[97vrsix]

I ask again! Please any T-mobile users, that are using a Gen.1, or 2G phone...What did you select in the advanced options page? So far i am clicking it all, and downgrading to 3.9

Does it matter what you do hear? 3.9 or 4.6? What one is better and will it brick the phone if you have one or the other? I am guessing no becasue their is both their, but again...What do you have, and what worked?

I am t-mobile...I use my phone! lol I have a Blackberry internet pack for 19.99...Help..

If you look at the other post, you'll see that i tryed every thing..
Please, and thank you! please and thank you!

[ARCHA1C]

@ PFCFURY -

When you received the Error (6) did you re-do the entire process, or just the Restore of the custom IPSW file? I've received the error 6 twice now, and was going to try it on a different PC.

Originally Posted by pfcfury

AT&T has been PWND!

AT&T users check these settings.

check Cydia only

add boot images if you like

uncheck activate phone

make sure you are using iPhone1,2_2.0_5A347_Restore and NOT iPhone1,1_2.0_5A347_Restore

I made that mistake

Build your IPSW then pwn with the custom one (i saved mine to desktop)

you should have itunes open during whole process

Itunes should close now

open Itunes

Set phone in DFU

Restore with Custom-iPhone1,2_2.0_5A347_Restore

If you get error 6 like 3 times keep trying it will eventually work

and BAM its PWND!!!

keep it plugged in your iphone will now reboot and activate over itunes.

ENJOY

# EASYCASH - In this post, you say you "Left click" and click on the "compatibility" option. You must have meant "Right click" unless you're using an inverted mouse setup.

Originally Posted by eazycash

ok guys...so here it is..im pretty sure alot of u 3g users have been having issues..well..I JAILBROKE MY 3G!! AFTER HUNDREDS OF STEPS..

1. i deleted my 2.0 restore file..and downloaded the direct 3g firmware from the link in this post.

2. i ended process itunes helper.

3. i left click on winpwn icon. click on compability tab. and check win xp sp2 and also check to use the program as administrator..

4. i opened winpwn and loaded my 2.0 3g iswp

5. made my custom ispw including cydia and custom boot images..and in advanced i clicked off active since im a legit at&t customer and click nothing else. after that i built my custom ispw. witout a problem!!(mind u i had tried it a billion times before all gettin errors).

6.after custom ispw was built i click on the ipwn tab and loaded the custom ispw to pwn itunes! again a success..(this is when my hopes started to build as i hadnt been able to reach this point before). and yes! got a message saying itunes was pwned.

7.reloaded itunes. held shift and click restore and choose the custom ispw created earlier...and let it ride...and YESSSSSSSSSSSSSSSSSSSSSSSS my 3g is now jailbroke with cydia pacakage installed!!! i reallllly hope this helps if u guys need a more in detail of how i did it pm or just ask here.

ALERT!!!! i am only one user..this way happen to have worked fine for me witout a hiccup..but i cant guarantee it will work for u. but worth a shot since i didnt get not one error and my 3g iphone is great!!!..


now...haha where the apps!! woohoo

with jailbroken 3g love.
eazycash!

ps. here are the details from winpwn

7/25/2008 8:41:42 AM - This is winpwn ver.:2.0.0.2 RC1
7/25/2008 8:41:42 AM - Apple Mobile Device Support Version 2.0.0.33 installed.
7/25/2008 8:41:42 AM - Failed to load image catalog
7/25/2008 8:41:42 AM - Failed to load payload catalog
7/25/2008 8:42:01 AM - File from:C:UserseazyDesktopiPhone1,2_2.0_5A347_Restore .ipsw
7/25/2008 8:42:01 AM - Recognized as:iPhone1,2_2.0_5A347_Restore.ipsw Type: IPSW_iPhone3G
7/25/2008 8:42:01 AM - Be sure to connect an iPhone 3G!
7/25/2008 8:42:51 AM - Preparing ipsw file.
7/25/2008 8:42:52 AM - Starting IPSW building
7/25/2008 8:42:57 AM - Adding custom Boot Logo
7/25/2008 8:43:01 AM - Adding custom Recovery Image
7/25/2008 8:43:03 AM - Extracting Root Filesystem
7/25/2008 8:43:17 AM - Growing Root Filesystem
7/25/2008 8:43:20 AM - Replacing Kernel
7/25/2008 8:43:21 AM - Applying patch fstab.patch
7/25/2008 8:43:21 AM - Applying patch Services.plist.patch
7/25/2008 8:43:22 AM - Adding package Cydia.tar
7/25/2008 8:44:35 AM - Rebuilding Root FileSystem (This will take a while)
7/25/2008 8:45:53 AM - Writing IPSW (This also will take a while)
7/25/2008 8:46:32 AM - Successfully created custom ipsw C:UserseazyDesktopCustom-iPhone1,2_2.0_5A347_Restore.ipsw
7/25/2008 8:47:06 AM - Killing Itunes
7/25/2008 8:47:09 AM - Itunes has been pwned. You can now restore your ipsw using DFU Mode


----------------
Now playing: 2Pac - I Aint Mad At Cha
via FoxyTunes

[jwblocal701]

OK i did everything right but when restoring my 3g phone gets stuck in Itunes with the screen saying "Verifying Iphone software" FOREVER just sits there and the phone shows plug into itunes now what

[Muggz5]

Originally Posted by 97vrsix

OK who is a T-mobile user? That has done this upgrade, and is running 2.0, and able to make phone calls...

And every thing works....What did you select? And again i am talking about a 2G phone, not a 3 G phone cause they WONT WORK ON 3G and T-mo

Please help me out...Who is working on T-mo, and what did you select?

I am building a new install of WinXp pro, as well Itunes, and the Winp program. I want to make sure i get this right...

Too many people are trying to give help, and not pointing at who they are talking to..

Thanks for the update!

Ok upon restore custom 2.0 when i made the file I checked everything to the note that was stated on the winpwn 2.0 guide linked atop the beginning of this thread. I downloaded all the files directly from what he provided. No variations!
Installed 7.7 then changed the startup ( > run> msconfig > startup) I unchecked all startup pertaining to itunes, Quick Time, Etc. and rebooted. I then installed winpwn, created custom file, checking everything that was suggested in the guide at the beginning of the thread. Then pwned itunes.

I then went to emergency screen mode and did the 7 sec. DFU mode. It didnt go in correctly. So i re-pwned itunes again. Opened it back up , switched to dfu through the 7 sec. emergency dial process, and it registered I clicked shift+ restore custom firmware and just made a few calls on it!!!! working fine. TMobile, XP, followed guide no deviations!

Originally Posted by jwblocal701

OK i did everything right but when restoring my 3g phone gets stuck in Itunes with the screen saying "Verifying Iphone software" FOREVER just sits there and the phone shows plug into itunes now what

That means you didnt get into DFU correctly. Its not registering in itunes. Shut down itunes, shut down itunes helper.exe in proccesses (Task MGR> proccesses> ituneshelper.exe) then make sure your phone is in locked, unactivated screen, that scrolls different languages on the slider. unlock slider open itunes, open winpwn, pwn itunes again. re open itunes, put into dfu mode via 7 second release method. and shift+restore that should do it. Continue this if it doesnt work... If your phone cant go to that home screen im talking about Id reccomend doing an itunes legal 2.0 update first and starting all over.

[jwblocal701]

it even does that same thing when doing a restor with legal iphone restore software why is that

[erix920]

I accidently put my phone into restore mode instead of DFU. Can I get out of the restore mode without restoring? - I also get Error 6 in iTunes as well but it's probably because i'm in restore mode not DFU.

Anyone got any ideas?

[Muggz5]

Originally Posted by jwblocal701

it even does that same thing when doing a restor with legal iphone restore software why is that

Unfortunately I dont have an answer for you, ive been doing this on 1st gen. phones. However which indicator is it? Is it the slide to unlock "plug into itunes" or is just the black screen nothing else besides plug into itunes? If it is with the slider, slide it and it should go to the emergency call only keypad. And then repeat your pwning itunes, and DFU mode proccess and it should at least attempt to work. If its the black screen restore (just the plug and itunes logo), Reopen itunes and restore & update factory settings. Thats about the only advice I have. MAKE SURE YOU ARE USING 3G Firmware, not 1st gen firmware. Its a major difference.

[littleelmo935]

i just used the new 2.0.0.3 and everything is working just fine. the previous ones gave me problems with my email.

[Xtremeiphone]

are the internet boot up images on winpwn 2.0.0.3 ????? I want the colorful apple logo ! LOL no big deal happy with my pWned phone... But now my battery is sh** ! !

[kuhndsn]

Here is what I was running when I tried this...

Windows Vista
16Gig 1.1.4 2g iPhone Jailbroke, unlocked with ZiPhone... Running a vodaphone (germany) sim card.

I used Winpwn 2.0 and followed the instructions...

I received no issues discussed on this thread.

Prior to me trying this I completely uninstalled and deleted all prev. Itunes folders except for my iTunes music folder which I left in its default location. I took my sync data file that iTunes created and put it on a thumb drive. Then I ran BCWipe to erace the files permanently that I deleted. I rebooted and installed iTunes 7.7 with no issues.

I then prepped my iPhone by creating a backup of my data using ibrickr_v0.91 and iPhone_Pc_Suite_by_iSpazio (I did two back-ups by two different programs....yup I am one of thoes guys that has lost an entire H/D and learned my lesson).

I installed winpwn 2.0 and followed the instructions. About 30 min later I was able to receive an incoming call from work. I also called out with no problem. I ran through the apps and they all worked with no problems.

I synced with iTunes and all my contacts and calendar info was installed perfectly.

After about three hours I decided to go back to 1.1.4!!!! Why you ask?!? Well while I like some of the new features none of them match up to Installer and all the freeware and my lovely summerboard. Not to mention being able to edit all .psd images with windows and directly place them into the iphone and enjoy the personalized look.

I also have a 3g that doesnt get much use. (not my cup of tea). The reason for this is because I own and have grown a custom to the better quality of the hardware 2g (except for the recessed headphone jack).

For those of you that are having issues upgrading your 2g here is my advise.

DO NOT UPGRADE YET, PERIOD DOT
The features are not all that when you stack them up against all the "bug" less apps out there. Wait a while.... The iPhone stand alone is good but with installer the option of personalizing your 2g with only limitation being your imagination makes 1.1.4 a Great phone!

Patients is bliss my iPhone lovers. perfection will come and my predictions are in about a month we will enjoy and one click GUI hack like Ziphone or simpler pwn. Not to mention Installer and hundreds of software available to us.

Hate the wait for the problem free hack! But enjoy what you have now, and thank the poster if you see fit.

--- iPhone 2.0 is not worth the hassle just yet.... I will come...

Here is what I was running when I tried this...

Windows Vista
16Gig 1.1.4 2g iPhone Jailbroke, unlocked with ZiPhone... Running a vodaphone (germany) sim card.

I used Winpwn 2.0 and followed the instructions...

I received no issues discussed on this thread.

Prior to me trying this I completely uninstalled and deleted all prev. Itunes folders except for my iTunes music folder which I left in its default location. I took my sync data file that iTunes created and put it on a thumb drive. Then I ran BCWipe to erace the files permanently that I deleted. I rebooted and installed iTunes 7.7 with no issues.

I then prepped my iPhone by creating a backup of my data using ibrickr_v0.91 and iPhone_Pc_Suite_by_iSpazio (I did two back-ups by two different programs....yup I am one of thoes guys that has lost an entire H/D and learned my lesson).

I installed winpwn 2.0 and followed the instructions. About 30 min later I was able to receive an incoming call from work. I also called out with no problem. I ran through the apps and they all worked with no problems.

I synced with iTunes and all my contacts and calendar info was installed perfectly.

After about three hours I decided to go back to 1.1.4!!!! Why you ask?!? Well while I like some of the new features none of them match up to Installer and all the freeware and my lovely summerboard. Not to mention being able to edit all .psd images with windows and directly place them into the iphone and enjoy the personalized look.

I also have a 3g that doesnt get much use. (not my cup of tea). The reason for this is because I own and have grown a custom to the better quality of the hardware 2g (except for the recessed headphone jack).

For those of you that are having issues upgrading your 2g here is my advise.

DO NOT UPGRADE YET, PERIOD DOT
The features are not all that when you stack them up against all the "bug" less apps out there. Wait a while.... The iPhone stand alone is good but with installer the option of personalizing your 2g with only limitation being your imagination makes 1.1.4 a Great phone!

Patients is bliss my iPhone lovers. perfection will come and my predictions are in about a month we will enjoy and one click GUI hack like Ziphone or simpler pwn. Not to mention Installer and hundreds of software available to us.

Hate the wait for the problem free hack! But enjoy what you have now, and thank the poster if you see fit.

--- iPhone 2.0 is not worth the hassle just yet.... I will come...

[Muggz5]

Originally Posted by erix920

I accidently put my phone into restore mode instead of DFU. Can I get out of the restore mode without restoring? - I also get Error 6 in iTunes as well but it's probably because i'm in restore mode not DFU.

Anyone got any ideas?

Ive also been reading if youre getting the error 6 to keep shutting down itunes and re-pwning it and attempting a custom restore but I may be wrong i never encountered the 6 error. I was one who had 1600-1604 errors over and over, occasionally a 1500 error. I have tried when stuck in restore to shut the phone off completely. It takes a few tries, but once the phone is completely off (and connected USB) < this is important because when its off and you connect it, it will turn back on. Then I hold power and home button (AFTER pwning itunes) for 10 seconds (1 one thousand, 2 one thousand.....) release power holding home until it registers in itunes then release. You might try restoring custom 2.0 from this point, I never was successful with it, but it is another way to get into DFU mode, when stuck in restore.

[kuhndsn]

Here is what I was running when I tried this...

Windows Vista
16Gig 1.1.4 2g iPhone Jailbroke, unlocked with ZiPhone... Running a vodaphone (germany) sim card.

I used Winpwn 2.0 and followed the instructions...

I received no issues discussed on this thread.

Prior to me trying this I completely uninstalled and deleted all prev. Itunes folders except for my iTunes music folder which I left in its default location. I took my sync data file that iTunes created and put it on a thumb drive. Then I ran BCWipe to erace the files permanently that I deleted. I rebooted and installed iTunes 7.7 with no issues.

I then prepped my iPhone by creating a backup of my data using ibrickr_v0.91 and iPhone_Pc_Suite_by_iSpazio (I did two back-ups by two different programs....yup I am one of thoes guys that has lost an entire H/D and learned my lesson).

I installed winpwn 2.0 and followed the instructions. About 30 min later I was able to receive an incoming call from work. I also called out with no problem. I ran through the apps and they all worked with no problems.

I synced with iTunes and all my contacts and calendar info was installed perfectly.

After about three hours I decided to go back to 1.1.4!!!! Why you ask?!? Well while I like some of the new features none of them match up to Installer and all the freeware and my lovely summerboard. Not to mention being able to edit all .psd images with windows and directly place them into the iphone and enjoy the personalized look.

I also have a 3g that doesnt get much use. (not my cup of tea). The reason for this is because I own and have grown a custom to the better quality of the hardware 2g (except for the recessed headphone jack).

For those of you that are having issues upgrading your 2g here is my advise.

DO NOT UPGRADE YET, PERIOD DOT
The features are not all that when you stack them up against all the "bug" less apps out there. Wait a while.... The iPhone stand alone is good but with installer the option of personalizing your 2g with only limitation being your imagination makes 1.1.4 a Great phone!

Patients is bliss my iPhone lovers. perfection will come and my predictions are in about a month we will enjoy and one click GUI hack like Ziphone or simpler pwn. Not to mention Installer and hundreds of software available to us.

Hate the wait for the problem free hack! But enjoy what you have now, and thank the poster if you see fit.

--- iPhone 2.0 is not worth the hassle just yet.... I will come...

[jwblocal701]

its at the plug into itunes sreen NOT the screen with the emergengy keypad just sits at verifying screen