WinPwn 2.0 Released

[robbpell]

i can also confirm the new version takes care of the error 1601 and 1602

[ggolow]

Well, I just risked it cuz I have an LG Shine just in case my iPhone gets locked or breaks so I wasn't too worried about it perma-locking. Anyways, the way I did it worked. I got every single 16xx error and the 6 error until I tried it this way.

do you checked the No Wipe option?

[pfcfury]

ERROR SIX MEANS KEEP RETRYING TO INSTALL CUSTOM IPSW!!!

It will happen! It took me 4 trys but it eventually took

PS- Set up as new phone! Otherwise it will boot ya back to your old firmware (2.0 non jailbroke)

[Samm_73]

Just Getting Errors 1600, 1601 and 1602 Can Anyone help me??????
I've tried to restore it back to 1.1.4 and stays on apple cable and iTunes logo screen, 1.1.3 just like when it was a fresh 1.1.2 OTB, everithing fine but the phone, PLEASE PLEASE H E L P!!!!

[xwinger]

do you checked the No Wipe option?

ya i clicked everything!

[1_iPhone_Lovin_Canadian]

im getting some movie website when i click on 2.01 link does anyone have the file they can direct me to?? Thank you tons

[crouching]

so here's my story.

downloaded winpwn 2.0.0.2
download the ipsw firmware (make sure you download the right one, 2g and 3g have different fw)
update itunes to 7.7

***i'm running 2.0 jailed with several apps downloaded***

for the whole process, i had my iphone plugged in while itunes is open.

1.open winpwn.
2. click "browse .ipsw"
search for the .ipsw you downloaded
3. click "build .ipsw"
i only checked "install cydia" and unchecked "activate" because i only wanted to jailbreak
once finished, click "build" at bottom right
4. winpwn will build the custom ipsw. it will take a while.
5. click "ipwner" and search for the custom ipsw you made (i saved mine on my desktop)
6. winpwn will kill/shutdown itunes and will confirm that itunes has been pwned
7. open itunes and wait for it to recognize your iphone
8. put iphone into DFU mode. when i did it to mine, there were no messages stating that my phone went into DFU mode but my screen remained black so i had no choice but to restore.
9. shift/restore and search for the custom firmware you made.
10. let itunes do its thing. it will stay at the "preparing iphone software for restore" for about 5-6 minutes. the whole process took me 10-12 minutes.
11. restore your backup and voila! you pwned your iphone!

OMFG I love you (no homo) I followed everything and it finally worked. OMG I am so happy, I've been up since 8AM this morning till now. I think the whole problem too was it was never really going into DFU mode, It was just flashing connect to iTunes and would never work, kept getting error 6.

BUT NOW IT WORKS!!!

[busnhedz]

Someone help me. These instructions seem easy but I keep getting these two errors:

1) winpwn crashes after I build the custom firmware and again after I click ipwner

2) when i try to restore with custom firmware in itunes, i keep getting error 1403

HEEEEEEEELLLLLLPPP

[Malevy]

Ok so if you get the errors when restoring just click restore and then iTunes will

say "restore and update" and you click yes.

iTunes then installs 2.0 to you officially and if you are currently unlocked, it will lock again.

Then you just hold sleep and home until iphone shuts off, then immediately release sleep button and hold home button for about

15-30 seconds until itunes recognizes the phone but the iphone screen stays black.

Then hold shift and click restore to your custom firmware that you made. It should now work

just fine.

Another thing I did was close iTunes helper, and all other Apple programs, except itunes.

i pray you are right

[crouching]

i pray you are right

He is right, also if the phone is not black when restoring, your doing it wrong

[Malevy]

it didnt work

[BlackMan_Forever]

Hi my iphone locked, I try the unlocking but dont work. Pls Help Me

Hi my iphone locked, I try the unlocking but dont work. Pls Help Me

[Malevy]

mine too...this sucks balls

[xwinger]

here are some pics i took after it was done

[tolis11]

if i upgrade my iphone from 1.1.4 to 2.0 and use the winpwn2 can my iphone unlock?

[xwinger]

Hi my iphone locked, I try the unlocking but dont work. Pls Help Me

Hi my iphone locked, I try the unlocking but dont work. Pls Help Me

mine too...this sucks balls

GUYS DO THIS:

(for original iPhone only)

Make sure it is in proper DFU mode!!
plug in to itunes, it will pop up with the "set up your AT&T plan," etc.
now hold the sleep button and the home button until the screen goes blank, then let go of the sleep button but keep holding the home button until you hear the lovely noise that means it just connected to the computer (the ba-DA sound) and it pops up in itunes that an iphone in recovery mode has been connected and you must restore. Then all you have to do is hold shift and click restore and click your custom firmware. Now it should work!

if i upgrade my iphone from 1.1.4 to 2.0 and use the winpwn2 can my iphone unlock?

If you make your custom firmware that way it will. Make sure you select "unlock baseband" when building your ipsw. You must also select "enable baseband update" and "neuter bootloader 3.9/4.6" to be able to select "unlock baseband"

[bijju]

OMFG I love you (no homo) I followed everything and it finally worked. OMG I am so happy, I've been up since 8AM this morning till now. I think the whole problem too was it was never really going into DFU mode, It was just flashing connect to iTunes and would never work, kept getting error 6.

BUT NOW IT WORKS!!!

that what i thinking problem is they are not going to dfu mode

[Samm_73]

Xwinger:

GUYS DO THIS:

(for original iPhone only)

Make sure it is in proper DFU mode!!
plug in to itunes, it will pop up with the "set up your AT&T plan," etc.
now hold the sleep button and the home button until the screen goes blank, then let go of the sleep button but keep holding the home button until you hear the lovely noise that means it just connected to the computer (the ba-DA sound) and it pops up in itunes that an iphone in recovery mode has been connected and you must restore. Then all you have to do is hold shift and click restore and click your custom firmware. Now it should work!



It is not working for me Im still getting 1600, 1601 and 1602, when i restored it directly from itunes it was the same in dfu, what is missing?

[Malevy]

[QUOTE=xwinger;1618771]GUYS DO THIS:

(for original iPhone only)

Make sure it is in proper DFU mode!!
plug in to itunes, it will pop up with the "set up your AT&T plan," etc.
now hold the sleep button and the home button until the screen goes blank, then let go of the sleep button but keep holding the home button until you hear the lovely noise that means it just connected to the computer (the ba-DA sound) and it pops up in itunes that an iphone in recovery mode has been connected and you must restore. Then all you have to do is hold shift and click restore and click your custom firmware. Now it should work!



thats what i did and i got the error for 1600

[UiK]

Is anyone else getting this error?