WinPwn 2.0 Released

[klepp1214]

rock on, I had no choice but to restore before re jailbreaking. This time I unchecked activate and left everything else alone, only checking cydia since the bootlogo thing is down -( it worked, got cydia on there and tested it. 11.5 hrs later, im jailbroken lol. Thank god I have 2 computers. Vista users Good luck, it did nothing but crash on the latest version for me, but xp finally came through! thanks for all the help gentlemen. Now I just gotta figure how to get me some custom boot logo's on there =)

[97vrsix]

OK so then lets try this...Or ask this please..

When in advanced options...What should i have checked? I am a T-mo user in the Us...The phone i bought from someone it was jailbroke, and running 1.1.4...Dont know if it is 3.9, or 4.6...

Also what state should my phone be in? Should i uninstall all my app's i downloaded with the installer on my phone? Bring it back to factory? then try the build?

I have re-installed the 2.0.0.2 and did the drop to run as xp, even took off account controls from Vista...no go...when i IP tunes it will shut down with error...

SO again what should i check off, i know Youto, cydia, the bootloading immages, then what options? Should i wipe?

[bluemax189]

well running winpwn as an admin doesnt seem to work at all. looks like some vista users are just gettin plain lucky here.

[Sn4key]

Hey guys,

So I've just been reading all along here but haven't had the *bawls* to jailbreak my iPhone 3G because I don't wanna mess anything up since all my stuff is important in there..

Couple of things worth mentioning that I didn't see answers for some of the questions in here that I figured out...

1. There are 2 different Firmware Files to download (1 for an iPhone 1st gen, 1 for an iPhone 3G). When you load each Firmware file, winpwn does say what type of iPhone you should load... There is iPhone1,1_2.0_5A347_Restore.ipsw (for 1st gen iPhones) and iPhone1,2_2.0_5A347_Restore.ipsw (for 3G)... Notice the 1,2 on the 3G file...

2. The question on why the Advanced Tab has items grayed out and only Activate and no Wipe available to check is the type of Firmware you try to load.. If you have an iPhone 3G, since we can't unlock the 3G yet, the Baseband checkboxes and below are grayed out.. since those items are involved in unlocking the phone.. If you load up the Firmware for 1st Gen iPhones, you see all the boxes available. You will know if you loaded the correct Firmware when you click to browse .ipsw; it says "Make sure you connect an iPhone" or "Make sure you connect an iPhone 3G!"

So that's that.. I went far enough to build my Custom ipsw but don't want to go ahead until it's all done and fixed..

Also a question of my own.. What would "No Wipe" do? If it means leaving the phone at its current state and jailbreaking it, it's nice because I don't wanna have to re-sync and re-set all the settings on the phone.. Or is it something else?

Thanks in advance!

[Rated_R]

Running Vista Ultim. Followed directions to a T. Downgraded to iTunes 7.5. Did everything suggested in this post. Still not jailbroken. I'm waiting for iLiberty or something along those lines. There are too many bugs in this program.

Great effort. I know it takes time for the developers to do this stuff. Just never works for me.

[faseone]

OK so then lets try this...Or ask this please..

When in advanced options...What should i have checked? I am a T-mo user in the Us...The phone i bought from someone it was jailbroke, and running 1.1.4...Dont know if it is 3.9, or 4.6...

Also what state should my phone be in? Should i uninstall all my app's i downloaded with the installer on my phone? Bring it back to factory? then try the build?

I have re-installed the 2.0.0.2 and did the drop to run as xp, even took off account controls from Vista...no go...when i IP tunes it will shut down with error...

SO again what should i check off, i know Youto, cydia, the bootloading immages, then what options? Should i wipe?

follow this guide check all they have
WinPwn 2.0 Guide
i just didnt do the custom images... id try w/o them first you could always build a new one later just get it working

[Flyinb]

I am using new release. go through the whole process and when I try to do a restore with the new ipsw, it extracts then gives me an iTunes error 6.

Help please...1st gen - XP

[Jeckel]

OK so then lets try this...Or ask this please..

When in advanced options...What should i have checked? I am a T-mo user in the Us...The phone i bought from someone it was jailbroke, and running 1.1.4...Dont know if it is 3.9, or 4.6...

Also what state should my phone be in? Should i uninstall all my app's i downloaded with the installer on my phone? Bring it back to factory? then try the build?

I have re-installed the 2.0.0.2 and did the drop to run as xp, even took off account controls from Vista...no go...when i IP tunes it will shut down with error...

SO again what should i check off, i know Youto, cydia, the bootloading immages, then what options? Should i wipe?

Do not worry at all about what's already on the iPhone. This is like restoring your iPhone, ALL of the apps will be wiped and you will start anew. (Don't worry about options and contacts, those are automatically backed up on your comp and will be synced back into the iPhone)

I have had no troubles with Vista (32bit), you may need the 2.0 .NET update (get it from Microsoft), run as administrator (if you have that on) and you may want to restart or reinstall iTunes (then restart).

As for options, since you want T-Mobile, don't activate, and it's ok for you to put on the Youtube fix (as that problem only applies to AT&T users). Boot images are entirely aesthetic, it's up to you to use them. Put on Cydia otherwise, what's the point? Without knowing bootloader data, cannot prescribe boot neuter options (some one else may know what to do off the top of their heads).

[faseone]

Running Vista Ultim. Followed directions to a T. Downgraded to iTunes 7.5. Did everything suggested in this post. Still not jailbroken. I'm waiting for iLiberty or something along those lines. There are too many bugs in this program.

Great effort. I know it takes time for the developers to do this stuff. Just never works for me.

Why downgrade itunes? it requires 7.7

[97vrsix]

Faseone, I did, i used that as a guied, figured ide ask and see if their was something missing..
By the way, this is the crash log:
Problem signature:
Problem Event Name: APPCRASH
Application Name: winpwn.exe
Application Version: 2.0.0.2
Application Timestamp: 4888edae
Fault Module Name: StackHash_16dd
Fault Module Version: 6.0.6001.18000
Fault Module Timestamp: 4791a7a6
Exception Code: c0000374
Exception Offset: 000b015d
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 16dd
Additional Information 2: aaf42a96d4fa45dacd1bc14cef00e4c8
Additional Information 3: 89cf
Additional Information 4: b18a15183580b36b7286f11816fc3ed4

thats from Vista..ultimate 32x...So any help would be great...As well if i should down grade to itunes 7.5 where do i get it, and what about my files on my computer now? Dont want to lose them...Any help?

Or should we all just go to bed, and wait for a day or two for them to get hte bugs out? I really dont want to brick my phone.

[fearcevill]

why cant I open winpwn? It keep saying error, the application faild to initialize properly(0xc0000135)

Please help

[bluemax189]

if you want to try the old version of itunes go to Old Version of iTunes Download

[Jeckel]

I am using new release. go through the whole process and when I try to do a restore with the new ipsw, it extracts then gives me an iTunes error 6.

Help please...1st gen - XP

You need it in DFU mode, NOT restore. Put it in DFU mode (while connected to the computer, the screen should be black, no image) and iTunes should pop up saying it needs to restore, THEN you select the custom firmware

why cant I open winpwn? It keep saying error, the application faild to initialize properly(0xc0000135)

Please help

Get 2.0 .NET update from microsoft.

[faseone]

I am using new release. go through the whole process and when I try to do a restore with the new ipsw, it extracts then gives me an iTunes error 6.

Help please...1st gen - XP

your not properly going into DFU mode...

hold top key slide to turn off..
when off hold both home and sleep/wake button (do this for 10 sec ... count) then release the sleep/wake and keep holding home key.. itunes should recognize your iphone... Your iphone shouldnt turn on during this process.. if it does your not entering DFU properly

[Flyinb]

I apologize i did DFU

[97vrsix]

So, t-mobile user's dont need to check off the activate square on the tool? I though we did for the fact that we could not do it other wise, or this would activate our phones for us?

I guess i'm wrong...At any rate, no matter what file i use, i still get that error when i try to tel Itunes to Ip

[bluemax189]

seems the problem in vista ive noticed is that when itunes trys to prepare the iphone for restore, the iphone doesnt exit DFU mode. If you use the stock ipsw, it actually boots up the apple logo.......hmmmmmm

[bijju]

I have a problem...
When im trying to create ISPW im getting error -1
Log:

2008-07-24 20:46:04 - This is winpwn ver.:2.0.0.1 RC1
2008-07-24 20:46:04 - Apple Mobile Device Support Version 2.0.0.33 installed.
2008-07-24 20:46:06 - Failed to load image catalog
2008-07-24 20:46:06 - Failed to load payload catalog
2008-07-24 20:46:13 - File from:C:Documents and SettingsAdministratorDesktopjjjjjiPhone1,1_2.0_5A347_Restore.ipsw
2008-07-24 20:46:13 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
2008-07-24 20:46:13 - Be sure to connect an iPhone!
2008-07-24 20:47:54 - Preparing ipsw file.
2008-07-24 20:47:54 - Failed to create directories The file 'C:Documents and SettingsAdministratorApplication Datacmwwinpwn2.0.0.1ipswbuildipswCustomCydia.tar' already exists.
2008-07-24 20:48:04 - Preparing ipsw file.
2008-07-24 20:48:09 - Failed to parse IPSW
2008-07-24 20:48:09 - Ipsw builder (init) returned error:-1
2008-07-24 20:48:36 - Preparing ipsw file.
2008-07-24 20:48:40 - Failed to parse IPSW
2008-07-24 20:48:40 - Ipsw builder (init) returned error:-1
2008-07-24 20:48:48 - Preparing ipsw file.
2008-07-24 20:48:53 - Failed to parse IPSW
2008-07-24 20:48:53 - Ipsw builder (init) returned error:-1

follow this guide check all they have
WinPwn 2.0 Guide
i just didnt do the custom images... id try w/o them first you could always build a new one later just get it working

and use the new version of winpwn 2.0.0.2

File: NEW_winpwn_2.0.0.2_Setup.rar
DownloadLink:
RapidShare: Easy Filehosting

Mirror

http://www.megaupload.com/?d=K21OVSR7

[faseone]

Man I wish I knew all you people and could tell you to come over... I love helping people its just so hard blind..

[msb2008]

heay guys i tried many guides but i was unable to upgrade to 2.0 using widows. but i found the following guide at iPhone-Hacks.com / Jailbreak and Unlock EDGE iPhone 2.0 With Windows Guide.
in fact i just followed steps 5-end and ignored 1-4 and it worked like a charm. i did not needed to create any ipsw files or anything. so if you just want 2.0 this i think is the most simple way.
the guide is below from their website:

step 1: Use WinPWN 1.0 To PWN Your 1.1.4 iPhone. If you need WinPWN Get it here: WinPwn v1.0.0.3 RC1 Download



WinPWN will ask for an IPSW you should use the 1.1.4 IPSW. Here is the link: iPhone Firmware v1.1.4 Download
Step 2: Install BootNeuter (Available via the classic Installer listed as 1.0)


Step 3: Run BootNeuter and have it Neuter your iphone. The selections you want are: 3.9 Bootloader, Neuter On, FakeBlank Off, Unlock On.


Step 4: Make sure your iTunes version is at 7.7


Step 5: Grab a pre-created IPSW Made with PWNAGE 2.0 Mac. You can grab one here: iPhone v2.0 Firmware Custom Download



Step 6: Grab iLiberty here: iLiberty 1.3 Windows Download


Step 7: Run iLiberty & Jump your iPhone into NORMAL Recovery mode — This is the most straightforward way to get it into the proper restore mode


Step 8: In iTunes Shift+Click the Restore button and find your custom IPSW Firmware file.


Step 9: The restore occurs (You should see a crazy pineapple while its running on your iphone). Then you should see bootneuter automatically come up (this is pwnage unlocking, activating and jail breaking your iphone).


Step 10:Enjoy 2.0 with AppStore & Cydia


NOTE: DFU Mode did NOT work for me and a lot of other people so to be safe stick with normal restore mode.
Offline