Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.
Thread: Downgrade your iPad's Firmwareis a discussion within the
iPad Jailbreakingforums, a part of the
I thought I'd post this up to help afew people out (If this could be stickied would also help) THIS WORKS IF YOU HAVE YOUR SHSH BLOBS Step 1 :...
12-30-2010, 06:44 AM #1
Downgrade your iPad's Firmware
I thought I'd post this up to help afew people out (If this could be stickied would also help)
THIS WORKS IF YOU HAVE YOUR SHSH BLOBS
Step 1: Download old ipsw firmware files iPad iOS 3.2.2 or 3.2.1 and save it on your desktop.
Step 2: Put your device into DFU mode with following instructions.
* Connect your iPhone to your computer.
* Turn iPhone off.
* Hold power and home together for 10 seconds (exactly).
* Release power but keep holding home until the computers beeps (observed on a PC) as a USB device is recognized.
* A few seconds later iTunes should detect your iPhone.
* If the Restore Logo is present on the screen, you are in Recovery Mode, not DFU.
Step 3: Do the following changes in your server.“c: \windows\system32\drivers\etc\” and open the hosts file in a notepad or wordpad. MAC users can navigate to the path “/etc/” and open the hosts file with TextEdit.
Step 4: At the end of file add the string “220.127.116.11 gs.apple.com” useful to redirect requests for certificates for authenticity that iTunes will make to the Saurik server.Follow the steps to do so.
For windows users:
# Open Notepad with administrator privileges and then right click on the icon of notepad and click on “Open as administrator”
# Now that Notepad is open Go to folder C:/WINDOWS/system32/drivers/etc and open the file
# Add the following line at the end of the document and save it: 18.104.22.168 gs.apple.com
For Mac users:
# Navigate to Go -> Go to Folder and enter the path /etc
# Open the file hosts with TextEdit, add the following string 22.214.171.124 gs.apple.com and save the file to your desktop.
# Now return to the previous folder by following the same method and copy the text within this file by replacing the original file (If prompted for a password enter it and click OK)
Step 5: Now open iTunes and do a normal reset by holding down the SHIFT key (for Windows users) or Alt key (for Mac users) and clicking restore in iTunes. This will make iTunes prompt you to select the location for your downloaded iPad 3.2.2 or iPad 3.2.1 file. Select the ipsw file and click on “Open”.
Step 6: Wait till iTunes installs the firmware on your iPad. After the update process is completed, iTunes might show the following error messages: “The iPad could not be restored. An unknown error occurred (1004).” and “iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes.” Press “OK” to continue.
Step 7: Your iPad will be stuck in Recovery Mode, showing that “Connect to iTunes” screen. To exit your device from Recovery Mode, download TinyUmbrella (Windows / Mac). Run it and the click on “Kick Device Out of Recovery”button. Your iPad will now restart normally.
Last edited by dantehman1; 01-02-2011 at 07:04 AM. Reason: Added SHSH goodnessIf I've helped you remember to say
01-01-2011, 09:01 AM #2
You may want to add that the firmware that are you are trying to downgrade to has to have it's shsh blobs saved at some point when apple was still signing them for that firmware.
01-01-2011, 02:43 PM #3
01-01-2011, 03:04 PM #4
01-01-2011, 03:33 PM #5
Nice guide bro
01-02-2011, 06:57 AM #6