Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.
05-21-2013, 12:30 PM #1
[Q] Sim trey stuck/ Power button not clicking/ where this part belong to
Hey guys i have 3 problems
i totally disassembled my phone to change bazel frame
now i have some issues:
1.my sim tray is kinda stuck. when i insert a pin to eject it i feel the pin goes all the way in but it doesnt effect anything, the only way to eject the sim is with a bended pin and using force(sim tray.jpg)
2.parts.jpg . what are those parts? i didn't assembled it back. no clue where
3.my power button/stand by button isn't working, it just doesn't click. should i change the internal holder? ((powerbutton1/2)
Thank you for your help !
05-21-2013, 02:02 PM #2
Well you didn't transfer your sim eject piece, as far as the power button, may have inserted it wrong.
05-21-2013, 02:47 PM #3
05-21-2013, 03:09 PM #4
About the power button, i realy tried anything, i doesnt click, it fills like there is no enough pressure on the button, so it "sinks" in
05-21-2013, 03:36 PM #5
05-21-2013, 11:10 PM #6
yes, the metal disk is there, i also tried it with the original button. same happens, sinks in.
we are talking about 2 parts right? the button and the metal holder
05-21-2013, 11:53 PM #7
As you can see on this picture
There is a small metal spacer on the back in the middle of the button. That is what I am talking about
05-22-2013, 01:24 AM #8
yeah i know, i have that metal round thingy
05-24-2013, 10:57 PM #9
Does your power button have the little blak piece on the actual metal button?
05-26-2013, 09:14 AM #10
I was about to ask this too..
It's VERY common problem for the little black piece to move or end up missing. I have power button repairs come into my shop all the time. It's a very easy fix.. I just add a new piece of plastic that is VERY small. Just enough to make it click. Easy moneyiRepair Indy
05-26-2013, 03:59 PM #11
pinkeye and iRepairIndy : thank you so much, i added a plastic thingy and it works, what kind of plastic do u use? becouse even though it works the click doesnt seem right...
back to the sim eject piece: i looked up in google and youtube and i couldnt find a guide how and where to place it.. please its realy important ! how and where do i screw ?
and again - thanks!
05-26-2013, 04:11 PM #12
05-26-2013, 05:58 PM #13
Has to be a hard plastic.
SIDE NOTE: I use a VERY, VERY small amount of super glue and attach the plastic to the METAL power button. I attach it to the bottom, middle, of the power button.
If it's not clicking correctly try using a different piece of plastic (maybe smaller?)
Last edited by iRepairIndy; 05-26-2013 at 06:00 PM.iRepair Indy
05-27-2013, 06:15 AM #14
what screw do i use? do i need to remove the lcd?
05-27-2013, 10:07 AM #15
11-25-2013, 01:32 AM #16
maybe your LED has some problem