Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.
Thread: Connector #1 problem?is a discussion within the
Hardwareforums, a part of the
Sup guys. Hope this is in the right forum. Recently replaced my digitalizer because I broke the glass and I've just put it all back together but for the life...
08-23-2012, 09:38 AM #1Connector #1 problem?
Sup guys. Hope this is in the right forum.
Recently replaced my digitalizer because I broke the glass and I've just put it all back together but for the life of me I can't get the white screen to go.
I fiddled around with it and it looks like connector one is having a problem, if I leave it half stuck down for example the screen sometimes displays the picture.
I have no idea what to do. Anyone got any ideas?
08-23-2012, 04:05 PM #2
Have you tried a hard reset afterwards. I get white screens every once in awhile after doing an install and that usually fixes up the issue. If not let me know and we can run through some other troubleshooting steps.Twitter: @irevivalrepairs | Instagram: @irevivalrepairs
iPhone 4/4S Frame Swappers:
Don't forget about that sim tray lever!
iPhone 5 Frame Swappers:
Don't forget about those screen clips!
08-23-2012, 09:47 PM #3
I've tried a reset and a DFU reset. Nothing.
I noticed that when I had the connector one inside in I moved the screen to oneside slowly and the screen actually came up. I'll post a video so its easier for you to understand.
08-27-2012, 02:56 PM #4
My camera is being funny as well.
Should I just buy a replacement LCD and see if that works?