Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.
Hardwareforums, a part of the
Was checking the #5 connector to see if it was disconnected because my lock button and volume rockers don't work. Wasn't the problem, so I plugged in the device to...
08-17-2012, 03:19 AM #1
Was checking the #5 connector to see if it was disconnected because my lock button and volume rockers don't work.
Wasn't the problem, so I plugged in the device to the charge cable to boot the device.
I hadn't closed the phone casing so I would have quick access to the connectors.
Anyway, the screen is working fine but then I move the front panel display of the iPhone assembly and then BOOOM! White.
-I have checked and reconnected the display connectors and can confirm they are properly seated.
Do you think that a reset, restore, DFU or whatever it's called would do the trick?
...Although, maybe I'm between a rock and a hard place because how can I do this without a functioning lock button?
Last edited by pyromaniaque; 08-17-2012 at 03:33 AM.
08-18-2012, 12:52 AM #2
I think you should try taking it apart a little more, and get the main board off of the battery contacts for a few seconds and then reassemble it... that helped me a few times