New LCD stays white

**Mrdabbas** · 02-19-2011, 08:19 PM

I damaged the LCD wire on my 3GS
I got a new one and put it in.. The screen stays white when I turn it on

I put the screen on another 3GS and worked good

How could this have happen?

If it helps it's a new bootrom iPhone

Thanks

**Cowboy** · 02-20-2011, 12:18 PM

Is the connector on the board damaged or dirty?

**Mrdabbas** · 02-20-2011, 02:05 PM

No it looks crisp

It was working before I damaged the LCD connector.. I separated it in half.. But I didn't touch the motherboards LCD connector

**Mrdabbas** · 02-20-2011, 08:10 PM

That's how it looks

**Mrdabbas** · 02-20-2011, 08:11 PM

Here

**Mrdabbas** · 02-20-2011, 08:14 PM

Originally Posted by Mrdabbas

That's how it looks

Closeup of LCD connector

**Cowboy** · 02-20-2011, 08:20 PM

And you tried a restore? If so then you have a bad connector on the board

**Mrdabbas** · 02-20-2011, 08:59 PM

Originally Posted by Westerman

And you tried a restore? If so then you have a bad connector on the board

I'll try a restore and post back

Any idea how it got damaged?

**Cowboy** · 02-20-2011, 09:06 PM

Pulling it off trying to put it on and bent a prong

**Mrdabbas** · 02-21-2011, 03:04 PM

Originally Posted by Westerman

Pulling it off trying to put it on and bent a prong

Hmm ok thanks I'll post back ... Though the prongs look clean and sharp

**Cowboy** · 02-21-2011, 03:06 PM

Ok lmk

**Mrdabbas** · 02-26-2011, 12:21 AM

No stayed white.. Took it to a pro and he basically told me I'm screwed

Sold it for 160 as is

**Cowboy** · 02-26-2011, 05:52 PM

not bad

**krazy** · 02-27-2011, 03:20 PM

I would have tried another LCD. Many times one LCD may not work, and another one will. Luck of the draw.

**Mrdabbas** · 02-27-2011, 03:39 PM

Originally Posted by krazy

I would have tried another LCD. Many times one LCD may not work, and another one will. Luck of the draw.

I tried 2 working ones

Knew they worked because after putting them back to they're original phones they worked great

**Effenpig!** · 02-27-2011, 03:40 PM

Originally Posted by krazy

I would have tried another LCD. Many times one LCD may not work, and another one will. Luck of the draw.

OP tried the screen on another phone and it worked fine

**krazy** · 02-27-2011, 03:49 PM

Did you try an LCD with a bad backlight? I keep a number of those on hand to test for this sole purpose. It tells me if its something else that is causing the problem or the phone's display IC chip.

**Mrdabbas** · 03-06-2011, 09:38 PM

Originally Posted by krazy

Did you try an LCD with a bad backlight? I keep a number of those on hand to test for this sole purpose. It tells me if its something else that is causing the problem or the phone's display IC chip.

It's weird the cracked LCD didn't respond at all on thus iPhone but was white on the other iPhone

Thread: New LCD stays white

LinkBack

Thread Tools

Display

New LCD stays white

Posting Permissions