Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.
01-27-2011, 12:56 PM #13gs touch screen repair, touch inaccurate
I just replaced a lcd/digitizer/screen for a friend. I'm not sure where he got it.
I put it back together and the display lights up properly. Touch screen is reporting incorrectly though.
To unlock the phone using the slider, I have to slide at the bottom of the battery indicator (about an inch higher) and some clicks are wrong. When entering passcode, pressing 4 clicks 6, 6 clicks 5, 5 clicks 4.
The #2 connector really had a hard time staying in, it wanted to pop off with almost no pressure at all.
Which connector # is for the touchscreen anyways?
Thanks for the help, I'm new to this!
01-27-2011, 01:40 PM #2
It the number to ribbon is what controls the digi.
I had a phone just like it earlier this week i swapped with with a new digi and it worked just fine i am guessing there is something wrong with the pics on the digi ribbon which is allowing it to pop off easily and messing up the positioning.
01-27-2011, 02:01 PM #3
Sorry, Are you saying it is the #2 ribbon that controls the digitizer?
And if it's popping off like I described, that would result in improper touch behavior?
And, connector #2 should snap in just like connector #1 and if it doesn't, I probably was sent a digitizer with a not-perfect connector?
01-27-2011, 02:02 PM #4