+ Reply
Results 1 to 1 of 1

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: iPhone 3G - 3.0 Won't power up.

is a discussion within the

Hardware

forums, a part of the

iPhone Modding

section;
Alright, so my iPhone 3G, the other day just decided it doesn't feel like turning on. I've had a bit of experience in looking around so I opened it up
...
  1. #1
    What's Jailbreak?
    Join Date
    Dec 2008
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default iPhone 3G - 3.0 Won't power up.
    Alright, so my iPhone 3G, the other day just decided it doesn't feel like turning on.
    I've had a bit of experience in looking around so I opened it up and check all the connection were good/clean then put it back together. Anyway, nothing for days and days.
    I decide to plug it into my (Logitech) Alarm Clock and it makes a sort of "buzzing/clicking" sound for a while, I assume it's connecting to something but not getting any audio, the Alarm clock also realises that the phone is there because it allows me to select "iPod" as the input, its worked on this Alarm Clock for a long time.

    Anyway, cut to about a day and a half after that (constantly plugged into alarm). The phone miraculously boots up but doesn't quite "boot" all the way. It gets to the "flat battery, CHAARRRGGEE MEEEE" screen and won't charge, doesn't even realise it can be charging. So, I unplug it, and bam, there it goes again, plug it back in, nothing but the clicking...

    I'd try a hard reset but the power button/entire mechanism is broke, therefor, no DFU mode or hard reset. It's currently sitting plugged into our Windows 7 Desktop and I'll leave it there in the hope that it switches on again and hopefully the computer recognises it so I can restore. The computer doesn't even recognise it's plugged in right now, nor does my mac.

    Any help is appreciated. Think I might need to replace that power button mechanism at some point =/

    Thanks again.

    Used system_profiler SPUSBDataType:
    USB Bus:

    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBOHCI
    PCI Device ID: 0x0aa5
    PCI Revision ID: 0x00b1
    PCI Vendor ID: 0x10de
    Bus Number: 0x04

    CTE-650:

    Product ID: 0x0018
    Vendor ID: 0x056a (WACOM Co., Ltd.)
    Version: 1.16
    Speed: Up to 12 Mb/sec
    Manufacturer: Wacom Co.,Ltd.
    Location ID: 0x04100000
    Current Available (mA): 500
    Current Required (mA): 80

    Apple Internal Keyboard / Trackpad:

    Product ID: 0x0236
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 0.77
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple, Inc.
    Location ID: 0x04600000
    Current Available (mA): 500
    Current Required (mA): 40

    IR Receiver:

    Product ID: 0x8242
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 0.16
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Apple Computer, Inc.
    Location ID: 0x04500000
    Current Available (mA): 500
    Current Required (mA): 100
    aka: nothing's showing up at all haha.
    Last edited by bruint; 05-25-2010 at 08:15 AM. Reason: Added detail.

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts