Thread: Dangit, I'm stumped
-
04-10-2011, 05:37 PM #1
Dangit, I'm stumped
Hookin up a friend of mine.
3g Iphone on 4.1.2 Using redsn0w to break it.
Every version I've tried, from rc8 on up seems to work, loads the ramdisc and all, finishes, but the damn phone refuses to reboot on its own.. I let it sit still connected to the PC.. It eventually powers down, and hitting the power button boots it, but no break or cydia.. If I disconnect it from The PC, same thing.. Powers down.. hit the power button, boots, no break n no cydia...
WTH am I missing here??????
-
04-10-2011, 05:41 PM #2
In redsn0w, did you check the box 'Install Cydia' ?
-
04-10-2011, 06:21 PM #3
Try greenposi0n for 4.2.1.
-
04-10-2011, 07:24 PM #4
-
04-10-2011, 07:34 PM #5
Check the zip for a readme. I remember seeing one. I did however just recentLy jb a 3G 4.2.1 using snowbreeze. My advice back it up, restore it clean then greenposi0n or custom with snowbreeze. Both those tools were the untethered for 4.2.1.
-
04-10-2011, 07:35 PM #6
Are you hactivating or not?
Quaerite et invenietis.
-
04-10-2011, 07:47 PM #7
If I remember redsnow 4.2.1 os jb was tethered only.
just looked at the readme file, in GPRC5 yes it supports 3gLast edited by Tjroberts3452; 04-10-2011 at 07:47 PM. Reason: Automerged Doublepost
-
The Following User Says Thank You to Tjroberts3452 For This Useful Post:
Baitcaster (04-10-2011)
-
04-10-2011, 07:53 PM #8
Well then im completely fuxored.. LOL No hacktivation.. Phone was already activated. Now, I DON'T have a sim installed.. Will that matter or not? I don't think it would.. Ive actually tried it both ways.. With my sim from my iphone n not.. Didn't seem to matter..
With GP rc6, it wont go into DFU mode either.. With redsnow, no problem..
I'm usually good with this stuff, but this ones got me REALLY confused.. LOL
-
04-10-2011, 07:55 PM #9
hmmm then try snowbreeze, and just make custom firmware.
-
04-10-2011, 08:08 PM #10
LOL.. Trying to avoid that..
OK. two other things.. This was updated to 4.2.1 by the previous owner.
Also, im running xpsp3, running everything off the desktop.. Wonder if I gotta run off root instead.. Ran into that kinda stuff before...
-
04-10-2011, 08:12 PM #11
-
04-10-2011, 08:18 PM #12
Well, runnin off root didnt do it either.. Loads ramdisc, loads kernal.. Phone stays "on" in DFU mode id assume, but doesnt reboot on its own..
Gotta be something stupid im missing....
-
04-10-2011, 08:34 PM #13
-
04-10-2011, 08:49 PM #14
k, Once it enters DFU mode using redsnow, it'll load the ramdisc and kernal.. But the phone never reboots on its own once it finishes getting loaded..
Yes to the dead black screen, then it lights up, but still a blank screen.. Once it's done getting loaded, it stays on that lit blank screen.. After about 5-10 mins, it just shuts down.. I have to turn it back on to bring it back up.. When i do no cydia, and i assume, no jailbrake..
-
04-10-2011, 08:55 PM #15
What do you know about the ipsw? Maybe it's corrupted in some way. Try a new one. One more thing, once in a blue moon a problem with a USB port or cable crops up. Try changing those too
-
The Following User Says Thank You to Mes For This Useful Post:
Baitcaster (04-10-2011)
-
04-11-2011, 04:41 AM #16
Hmmm.. Thought of that, but never really considered it.. Will do..
Ill try again tomorrow.. Ill let ya know whats what when i get there.. 
Thanks!!
Ok. Tried fware downed from here. Same thing. Loads fine best I can tell but the break doesn't take.
May b a dumb question, but does the fware need to have the phones shsh signature to work considering I'm breaking it??Last edited by Baitcaster; 04-11-2011 at 04:41 AM. Reason: Automerged Doublepost
-
04-11-2011, 08:58 AM #17
Jailbreaking has nothing to do with SHSH needs ... it's about the phone and iOS version.
Not required for any 2G/3G loading any iOS 3.1.3 and below.
Required for any iOS 4.0 version and above with all iDevices
Required for all 3GS, iP4, & iPad iDevices loading any iOS version.
Are you loading 3.1.2/3 on a 3G? SHSH not required. If 4.0 and above, required.
-
04-11-2011, 01:49 PM #18
Then that must be whats happening.. I didn't update the phone with 4.2.1. It was already done. So me trying to go over the top w/ redsn0w using an alternate download of same thing but no shsh for it must be causing this..
I have the shsh for whats in the phone now. Any way to attach it to the downloaded one i have here ?? Hope that made sense..
Thanks again mes.. Appreciated
-
04-11-2011, 02:55 PM #19
^If you have the 4.2.1 SHSH (remember each version is different and different for every phone), then so does Cydia -AND- TinyUmbrella can use it!

Verify it! Run TinyUmbrella, download all SHSH blobs, Verify 4.2.1 is listed. If it's there, you're good to go (but you must have the TU SHSH server running before you do almost anything.
-
04-11-2011, 03:08 PM #20
Yeah.. I did that last night.. I have it in Tiny.... Didn't need to have the server running though to verify..

So I'm assuming I was right then. Me trying to load a non signed kernal, even though broke, wasn't going to work.. Knew it was something stupid.. LOL
K.. Whats next??



LinkBack URL
About LinkBacks
Reply With Quote
