+ Reply
Results 1 to 7 of 7

Your favorite Apple, iPhone, iPad, iOS, Jailbreak, and Cydia site.


Thread: Itunes doesn't sync with firmware 1.1.1 and 1.0.2 baseband guide

is a discussion within the

General

forums, a part of the

Jailbreak / Downgrading / Upgrading

section;
I'm with a 1.1.1 version of firmware and 1.0.2 modem working "OK". But I discovered a little fault, I can't sync with Itunes (I read it happened to anothers too).
...
  1. #1
    What's Jailbreak?
    Join Date
    Oct 2007
    Posts
    19
    Thanks
    1
    Thanked 1 Time in 1 Post
    Default Itunes doesn't sync with firmware 1.1.1 and 1.0.2 baseband guide
    I'm with a 1.1.1 version of firmware and 1.0.2 modem working "OK". But I discovered a little fault, I can't sync with Itunes (I read it happened to anothers too).

    What can I solve it? Maybe changing lockdownd with one from 1.1.1 version?

  2. #2
    Green Apple
    Join Date
    Oct 2007
    Posts
    71
    Thanks
    1
    Thanked 22 Times in 15 Posts

    Default Me too...
    I would like to know the answer to that question as well.
    I am having the same issue with my firmware v1.1.1 w/ baseband 3.14.08.

    It seems the following occurs:

    1) Using the lockdownd 1.0.2 file allows for activation and phone works with T-Mobile, but after reboot the USB connection is not starting, therefore not allowing iTunes to connect to the iPhone.

    2) Using the lockdownd 1.1.1 file after activation with lockdownd 1.0.2 allows USB to work correctly and iTunes to connect to the iPhone, but kills the GSM signal and Activation - the phone doesn't work.

    Seems we need a v1.1.1 lockdownd file that allows activation to work correctly or a v1.0.2 lockdownd file with USB support.
    Any ideas would be appreciated.

  3. #3
    iPhoneaholic ReVan's Avatar
    Join Date
    Oct 2007
    Location
    BOOTLOADER
    Posts
    458
    Thanks
    6
    Thanked 526 Times in 109 Posts

    Quote Originally Posted by freshster View Post
    I would like to know the answer to that question as well.
    I am having the same issue with my firmware v1.1.1 w/ baseband 3.14.08.

    It seems the following occurs:

    1) Using the lockdownd 1.0.2 file allows for activation and phone works with T-Mobile, but after reboot the USB connection is not starting, therefore not allowing iTunes to connect to the iPhone.

    2) Using the lockdownd 1.1.1 file after activation with lockdownd 1.0.2 allows USB to work correctly and iTunes to connect to the iPhone, but kills the GSM signal and Activation - the phone doesn't work.

    Seems we need a v1.1.1 lockdownd file that allows activation to work correctly or a v1.0.2 lockdownd file with USB support.
    Any ideas would be appreciated.
    Try re-doing the flash by following this guide:
    http://www.modmyi.com/forums/showthread.php?t=10461

  4. #4
    What's Jailbreak?
    Join Date
    Oct 2007
    Posts
    19
    Thanks
    1
    Thanked 1 Time in 1 Post
    Finally, I got it.

    I restored all to 1.0.2 (virginize) and start again with the new Independence 1.2.2 . I follow the guide (help of Independence)

    1- Put DFU mode
    2- Activacion 1.0.2
    3- Jailbreak 1.0.2
    4- Install SSH, SCP, SFTP in 1.0.2
    5- Pre-Patch 1.1.1 (in firmware tab)
    6- Update via Itunes to 1.1.1
    7- Activate 1.1.1
    8- Jailbrake 1.1.1 (I didn't need to do this step, my 1.1.1 Iphone was Jailbreak after update. It's necesary if the status is Jail)

    9-Install SSH, SFTP, SCP in 1.1.1
    10-Post 1.1.1 Upgrade (If you don´t follow this step, the Iphone will be with 300mb) I used it with Independence 1.2.2 Independence 1.2.3 hasn´t

    11- Copy via sftp Installer 1.1.1 to Iphone
    12- Patch Springboard
    13- Restart phone
    14- Install these apps
    -Community Sources
    -BSD Subsystem
    -VT100

    15- From VT100 (Inside the iphone) flash baseband to 1.0.2
    16- Install anySIM and use it
    17- Copy lockdownd to /usr/libexec folder
    18 - Restart and all works fine.

    For International support you need to edit M68AP.plist file in "/System/Library/CoreServices/SpringBoard.app/" and change below "International" "false to "True". After this, New menu is in Settings-General

    Files necesary:

    http://appldnld.apple.com.edgesuite....8_Restore.ipsw
    http://independence.googlecode.com/f...nce_v1.2.3.dmg
    http://rs227.rapidshare.com/files/62872501/Material.zip (This file has M68AP.plist modified with International support , springpatch and other required stuff
    Last edited by oscar8x; 10-16-2007 at 02:30 AM.

  5. #5
    iPhoneaholic ReVan's Avatar
    Join Date
    Oct 2007
    Location
    BOOTLOADER
    Posts
    458
    Thanks
    6
    Thanked 526 Times in 109 Posts

    Quote Originally Posted by oscar8x
    For International support you need to edit M68AP.plist file in "/System/Library/CoreServices/SpringBoard.app/" and change below "International" "false to "True". After this, New menu is in Settings-General
    You can even do this by going to Settings > Phone without having the SIM Card in the phone.

  6. The Following User Says Thank You to ReVan For This Useful Post:

    oscar8x (10-16-2007)

  7. #6
    Green Apple
    Join Date
    Oct 2007
    Posts
    71
    Thanks
    1
    Thanked 22 Times in 15 Posts

    Quote Originally Posted by oscar8x View Post
    Finally, I got it.

    I restored all to 1.0.2 (virginize) and start again with the new Independence 1.2.2 . I follow the guide (help of Independence)

    1- Put DFU mode
    2- Activacion 1.0.2
    3- Jailbreak 1.0.2
    4- Install SSH, SCP, SFTP in 1.0.2
    5- Pre-Patch 1.1.1 (in firmware tab)
    6- Update via Itunes to 1.1.1
    7- Activate 1.1.1
    8- Jailbrake 1.1.1 (I didn't need to do this step, my 1.1.1 Iphone was Jailbreak after update. It's necesary if the status is Jail)

    9-Install SSH, SFTP, SCP in 1.1.1
    10-Post 1.1.1 Upgrade (If you donīt follow this step, the Iphone will be with 300mb) I used it with Independence 1.2.2 Independence 1.2.3 hasnīt

    11- Copy via sftp Installer 1.1.1 to Iphone
    12- Patch Springboard
    13- Restart phone
    14- Install these apps
    -Community Sources
    -BSD Subsystem
    -VT100

    15- From VT100 (Inside the iphone) flash baseband to 1.0.2
    16- Install anySIM and use it
    17- Copy lockdownd to /usr/libexec folder
    18 - Restart and all works fine.
    This is what I have done as well, except for step 16 I used Erica's Unlock.
    Is your iTunes sync working with lockdown (v1.0.2) after running anySIM?
    Maybe I should try running anySIM instead of Erica's Unlock.

    Thanks!

    Quote Originally Posted by ReVan View Post
    Try re-doing the flash by following this guide:
    http://www.modmyi.com/forums/showthread.php?t=10461
    I don't think you understand.
    My final goal is to be running firmware 1.1.1 with downgraded baseband v3.14.08 and "free" unlocked on T-Mobile.

    Everything works so far, except my the USB connection and iTunes.
    Last edited by freshster; 10-16-2007 at 03:42 AM. Reason: Automerged Doublepost

  8. #7
    Green Apple
    Join Date
    Oct 2007
    Location
    Switzerland
    Posts
    67
    Thanks
    9
    Thanked 4 Times in 3 Posts

    same problem out here

    I did the same as oscar8x did....

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts