[nickswagger]

I use the case mate barely there with the back part of invisible shield and it works great!

[A_DuB187]

You have to be very careful when trying to put a case over an invisible shield. Especially with any kind of slider case. You might get it to slide in but with the extra thickness and grip the material provides you probably wont get it out. Ive heard several horror stories of people putting cases over this product and not being able to get it out without damaging either the case or the phone. Just be care with the type of case you try.

[ThereIsNoBall]

All right. Reporting back after using the Speck Candyshell and Incipio Feather with the BSE (Front and Back).

My assessment is a qualified "OK."

Qualifications:
1. You are VERY careful / OCD type persistence putting the case on.
2. You do NOT plan to change cases often, if ever.

The cases fit and look fine. The Candyshell you wouldn't even know it's there.

In the Feather the coverage for the exposed bottom is welcome. However, the BSE is thick enough that phone rises above the edge of the case so the screen juts out a bit. It was originally flush with the front of the phone.

Both cases are very very tight with the skins and putting them on or taking them off putts a lot of stress on the corners and edges.

So, if you're going to do it. Put the skin on. Wait a couple DAYS for it to completely dry. Put the case on very carefully. Don't take it off. You're good to go!

That's my take.

-Terry

[ZipZapp]

What is you snapped the phone into the feather case before the InvisibleShield of BSE had dried...would it mold better and make removal easier?

[calebdexter]

i also have invisible shield on my iphone 2G, ever since it was installed, it didnt fit my slim fit case from grffin, so now im either switching from my pouch case or to my iskin revo 2 case, any pouch or silicon case will do, but with hard shell cases especially slider cases, chances are your iShield would be damaged.

[ThereIsNoBall]

Originally Posted by ZipZapp

What is you snapped the phone into the feather case before the InvisibleShield of BSE had dried...would it mold better and make removal easier?

I don't think so. If the shield was still wet, there would be no way the shield would stay in place while the case was being put on.

-TiNB

[ZipZapp]

Not a slide on case but a ultrathin that snaps on.