iPhone won't kick out of recovery mode

[GSW8]

Hi guys, I bought an iPhone on craigslist and it was working fine but after I checked everything out, he restored it and gave it to me. While I was driving home I realized the phone had died during the restore progress. When I got home, recharged it and when it powered on it when straight to the connect to iTunes screen. Now every time I try to restore it, it is giving me and 1015 error, even sometimes an 2010 error. I've tried going into DFU mode and trying to kick it out of recovery using, iTerminal, quickpwn, and iReb. I do know that the phone was unlocked and jailbroken. It was on 3.something but I don't remember the exact version. Please help, this has been frustrating me. Thanks guys

[delusion950]

there are super great tutorials for people with 1015 error. You will find it in the same section where you posted this thread. If not

Download stock 4.2.1
Download Custom 4.2.1 for your iphone.
Download redsn0w 0.9.6.b6
run it. browse stock 4.2.1 if is 3gs iphone select old or new boot.
On the next window select put phone in dfu pwn mode mode.
Next screen follow direction ms if ur successful you get press done and Successful
Exit redsn0w
Open iTunes
Hold shift and browse to custom 4.2.1 for whatever version of iphone you got. Let it finish enjoy your fresh iphone !

Google is great in finding what you are looking for.

[GSW8]

I've tried doing that and that's when the error 2010 popped up.

[delusion950]

you used redsn0w to put yout iphone in PWN DFU mode?

what version of iphone do you have?

[i.Annie]

Which iPhone?

[GSW8]

yeah I used redsn0w. I'm not too sure on the version because it was stuck in recovery mode before I got to use it. It is an iPhone 3GS.

[delusion950]

it should work if u use custom 4.2.1. what else have u tried if u dont know what version on redsn0w download 0.9.6b6 and try again. what windows r u using?

[Tjroberts3452]

Tiny umbrella should kick it out of recovery mode.

[i.Annie]

Tiny umbrella should kick it out of recovery mode.

It doesn't work on 4.2.1.

[GSW8]

it should work if u use custom 4.2.1. what else have u tried if u dont know what version on redsn0w download 0.9.6b6 and try again. what windows r u using?

I could just download any custom 4.2.1? I'm using snow leopard.

[i.Annie]

If you have a Mac make your own custom firmware

[Stray]

Using pwnage tool

[i.Annie]

Thank you and hello Stray

[Stray]

Hi Annie

[GSW8]

Thanks for the help guys. I tried doing what you guys told me but the 2010 error keeps popping up?

EDIT: sometimes its giving me an 1600 error.

[Stray]

If you are using the custom firmware are you putting it into pwned dfu mode?

[GSW8]

Yeah, I'm putting it in DFU mode. I hope I could get this all figured out.

[Capn_2o]

Try this out. Worked for me on 4.2.1 ON A 1013 error.

Added--(I figure it couldn't hurt to try since u r stuck in the loop)

Do not use tiny umbrella when restoring to 4.2.1. If you are on official carrier then open tiny umbrella, click advanced, deselect the box that says "set hosts to cydia on exit" then CLOSE tiny umbrella and try the restore again.

Sent from my iPhone using ModMyi

[GSW8]

Nevermind. Got it to boot up! Thanks for all the help guys! I am having another issue though. It is stuck on no service. This phone was unlocked and was previously used on T-Mobile USA but I am trying to use this phone on AT&T. I'm on 4.2.1 and the baseband is 6.15.00. I've tried searching google but no luck. Any suggestions?

[i.Annie]

Did you install ultrasn0w from Cydia yet