• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • Our iPad Hovers Near Our iMac With Twelve South's HoverBar


    The HoverBar by Twelve South is currently designed to clamp any of the current generation iPads to a multitude of surfaces that are 1Ē or less in width and it does so with class. Similar to all other Twelve South products Iíve come across, the HoverBar is well made. From the moment I saw and held the box in my hand throughout the whole unboxing, I was quite impressed with the end-result. The HoverBar comes with a large aluminum clamp, a gooseneck arm, a plastic bracket for the iPad, a silicone pad, and four plastic wire clamps.




    The clamp is a very solid block of aluminum with a large machine screw for tightening down on whatever you decide to clamp to. To top it all off, the clamp is lined with rubber to help prevent any damage to the surfaces you use the HoverBar on. The clamp also has two different mounting holes for the arm, giving users the ability to customize the positioning of their HoverBar to a whole new level.



    The iPad snaps into a lightweight plastic bracket which is secured to the gooseneck arm via a ball and socket interface. Users will be given the option to adjust the tension of the ball/socket by using a threaded collar on the back of the contraption as well, allowing maximum control of the iPadís positioning.



    The assembly of the whole product took just a few minutes overall. It was as simple as screwing in the gooseneck arm on one end to the clamp and on the other end to the plastic bracket for the iPad, then tightening a threaded collar on the back. Afterwards, I ended up clamping the HoverBar to an iMac and using the four plastic clamps to help manage the charging cable for the iPad.

    The four plastic clamps seemed a bit flimsy to me originally but they definitely got the job done. I thought the addition of the clamps was like icing on the cake as it showed the company put some thought behind the product as a whole and every little nuance that a consumer might have to deal with when using the product. The only other issue I had with the product as a whole was the iPad oscillating when touching it. I did notice that adjusting the threaded collar on the back helped with this though so it may have just been the way I had set it up originally which caused the issues in the first place.

    Overall, the HoverBar is a nifty accessory for those who donít mind paying the somewhat hefty price tag for it ($79.99). Many people who use their iPad on a daily basis, especially for work, will find the accessory perfect to use. It is a great space saver for the desk as well as an excellent way to level the iPad at the right angle for viewing purposes. In my opinion the price is justified as youíll quickly learn to appreciate the build quality along with the smaller efforts Twelve South has put into the product.



    If you are interested in purchasing the HoverBar, you can do so from Twelve South's website for $79.99.
    This article was originally published in forum thread: Our iPad Hovers Near Our iMac With Twelve South's HoverBar started by Akshay Masand View original post
    Comments 12 Comments
    1. Chase Hainey's Avatar
      Chase Hainey -
      At that price point, unfortunately I will not be purchasing one. I do like the idea, I just don't have as much need for a setup like that to constitute the money. Kudos for making such a nice looking addon. I will be keeping an eye on one of these if they happen to go on sale.
    1. woko0291's Avatar
      woko0291 -
      I wish i saw this 2 weeks earlier. I would have forgone buying that nifty bookbook case for my ipad and gone for this instead. Just my luck.
    1. The6uest's Avatar
      The6uest -
      I got something just like this for about $20-30 not long ago. I mounted it to my desk so I can have my iPad right next to it. It also has a flexible arm like this one. I was even able to modify it slightly so that I could still have my Smart cover on it when not in use.
    1. bigboyz's Avatar
      bigboyz -
      $80 for a plastic arm?? I don't think so..NEXT!
    1. The6uest's Avatar
      The6uest -
      Quote Originally Posted by bigboyz View Post
      $80 for a plastic arm?? I don't think so..NEXT!
      Well, if it's like the one I have it's got a flexible metal 'gooseneck' with a plastic cover around it.
    1. thazsar's Avatar
      thazsar -
      I don't understand why you're using this? Seems like a pain to try and use the iPad while its hanging in the air!

      Please elaborate how & why you all are wanting/needing to use both at the same time...
    1. The6uest's Avatar
      The6uest -
      Well I actually have mine lower, close to my keyboard and slightly angled so I can easily use it when I need to. I'm not sure why someone would want it like shown in the image above. If it was in landscape mode then it could be used to watch videos while doing something else on the PC/Mac.
    1. Hondamaker's Avatar
      Hondamaker -
      Quote Originally Posted by The6uest View Post
      I got something just like this for about $20-30 not long ago. I mounted it to my desk so I can have my iPad right next to it. It also has a flexible arm like this one. I was even able to modify it slightly so that I could still have my Smart cover on it when not in use.
      You're not gonna tell us what it is?
    1. ronfin44's Avatar
      ronfin44 -
      I like that wallpaper. Would ya mine posting a link for it?
    1. The6uest's Avatar
      The6uest -
      Quote Originally Posted by Hondamaker View Post
      You're not gonna tell us what it is?
      I didn't remember the name when I posted that but I checked and found it now. It's the Atdec Visidec VTB-FD Flexible iPad Desk Mount and I got it from Buy.com. It's gone back up in price but I looked at the order history and see I actually got it for $35 when it went on one of their 'Daily Deals'. So unfortunately it's not such a good deal now..
    1. ankit_jedi's Avatar
      ankit_jedi -
      Can somebody please post the link for that wallpaper?
    1. steeda763's Avatar
      steeda763 -
      And cue the people who suddenly invent a need for this...