• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • Free Unlock running 1.1.1 with a 1.0.2 baseband
    you saw it on mmi first. Free unlock for 1.1.1

    Using bits and pieces of some guides here on mmi JedixJarf has confirmed free unlocking running 1.1.1

    First you need to virginize your iphone.

    OSX
    Windows

    next you need to get 1.1.1 jailbroken and running ssh and bsd installed and your phone activated on 1.1.1

    OSX
    Windows

    Then just downgrade the baseband only, then unlock

    OSX Step 10 through 17
    Windows



    You may not want to try this until the method has been perfected. If you don't know what you're doing don't Try this. It works, but if you mess up at all you will corrupt the baseband beyond repair. If you are patient you can wait until The Dev Team updates anysim to work on the 1.1.1 or another 1.1.1 app is created
    This article was originally published in forum thread: Free Unlock running 1.1.1 with a 1.0.2 baseband started by Cody Overcash View original post
    Comments 272 Comments
    1. oscar8x's Avatar
      oscar8x -
      Í don-t know why, but I lost sync with Itunes. Yestarday worked fine with several restarts, but today I connected to macbook and didn´t charge.

      Damn it.

      I uninstalled Openssh and installed again. I didn´t anymore
    1. felixlaumon's Avatar
      felixlaumon -
      If you screwed up your phone and failed to restore by iPhone, you can always go to the DFU mode by pressing the HOME + SLEEP/WAKE button for 10 seconds, and then HOME button alone for 10 seconds. You must do that when the iPhone is either completely booted up, or completely switch off. The backlight will not on but iTunes should be able to restore the firmware, including the baseband.

      So with this mode, you can rescue a lot of bricked iPhone. Hope that helps.
    1. tomtom's Avatar
      tomtom -
      Quote Originally Posted by ibushak View Post
      Hi.... I made a mistake in the process with an 1.1.1 iphone, after all I tried to restore again with iTunes, but I DONT HAVE BASEBAND, I erased..... please help me!!!!!!

      In the Settings, Wifi I have NO WIFI.....

      No restore, what can I do????
      i had the same thing twice this helped:

      felixlaumon

      If you screwed up your phone and failed to restore by iPhone, you can always go to the DFU mode by pressing the HOME + SLEEP/WAKE button for 10 seconds, and then HOME button alone for 10 seconds. You must do that when the iPhone is either completely booted up, or completely switch off. The backlight will not on but iTunes should be able to restore the firmware, including the baseband.

      So with this mode, you can rescue a lot of bricked iPhone. Hope that helps.
    1. jameselder232's Avatar
      jameselder232 -
      Just so you all know i have successfuly downgraded my baseband to 3.14.08, from 04.01.13 while keeping the firmware at 1.1.1. I have also unlocked my iphone using ericas unlocker which was meant and only works with 1.02 baseband. hence the need to downgrade just the baseband.

      I did this following this guide, and it was fairly easy once i realised i had skipped some steps, i skipped them becuase it said they were optional but they weren't in my case.

      I know that a new anysim is out to unlock 1.1.1 automatically, but i had to have a go at this long manual way.

      Thanks,
      james
    1. appleater's Avatar
      appleater -
      Can anyone help??? i have error while executing the ieraser and bbupdater it states that the zsh command not found

      I have this problem with the terminal step in 1.1.1, i type in the dir and chmod-ed the ieraser but when i run it. it says that ieraser zsh: command not found: ieraser?? any ideas how to fix it? thnx.....
    1. khanay's Avatar
      khanay -
      i somehow erased my baseband when i downgraded to 1.0.2 from 1.1.1 and used anySim 1.1....i cnt change the baseband to 3.xx cz i dont have any ..its unknown...i tried all the instruction on Mobile terminal and it doesnt work...it apprently give me as error saying bootloader is too old please update
    1. RC_OZ's Avatar
      RC_OZ -
      I unlock out of the box 1.0.2 FW iPhone with AnySim 1.1

      Do I need to virginize iPhone to upgrade to 1.1.1 ?

      Please advise.
    1. yowiphone's Avatar
      yowiphone -
      WONT this made do the same thing?

      http://modmyi.com/wiki/index.php/Dow...1_to_1.0.2_OSX
    1. NateFishler's Avatar
      NateFishler -
      I purchased a new iPhone about 2 days ago and tried to unlock it. AnySim 1.1 crapped out on me and using this tutorial and a few others I put together this tutorial on how to completely virginize a bricked stock 1.1.1 iPhone:

      http://www.fishlr.com/?p=25

      Hope it helps anyone in need.
      Nate
    1. artjr's Avatar
      artjr -
      Quote Originally Posted by cash7c3 View Post
      start at step 10 in the osx guide
      What do I do if Ibrickr wont see iphone? Itunes dont even see it. I downgraded to 1.0.2 with 4.01 baseband. Its like it's not communicating with ibrickr or itunes. Any suggestions?
    1. Arne2606's Avatar
      Arne2606 -
      I succesfully unlocked my iphone version 111. But in the end it says: "Congratulations! You've successfully unlocked your baseband by not corrupting it like anySIM 1.0.2/iUnlock does. Feel free to upgrade to v1.1."

      Before messing everything up. Is this just after everything worked go into restore mode and press restore selecting the 111 upgrade file?

      Do I have to do some stuff afterwords later again? Or is it just done then?

      Hope someone can help me out!

      What a lame guide. Just upgraded like it said to 111. Can start all over again!!!!
      Best regards,

      Arne
    1. Kyle Matthews's Avatar
      Kyle Matthews -
      Huh?