• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • Unlock OTB 1.1.2 and 1.1.3 via Installer via ModMyI Repo


    This is on the ModMyI.com source in installer. We are a official community source in installer no need to manually add any source.

    Mr. George Hotz, guardian of the freedom of the iPhone, granter of hope to the masses, owner of a Nissan 350z, has once again graced us with an unlock solution we were waiting on, as you may have seen.

    I've packaged it up for Installer now [UPDATE, NEW INSTRUCTIONS], if you have an OTB 1.1.2/1.1.3, you will need to:
    downgrade to 1.1.1,
    jailbreak,
    install this package,
    OkToPrep and updgrade/jailbreak 1.1.2 (just hold down Option (shift in Windows) while pressing upgrade, and point iTunes to the 1.1.2 firmware file)
    and then install the DevTeam upgrade to get back to 1.1.3.


    You'll wind up with an unlocked 1.1.3 with the 4.6 BL. (thanks, BigBoss, for suggestion).

    I will be looking into a native app to run this, so you can run it straight from 1.1.3. I'll let ya know.

    DO NOT RUN THIS ON A 3.9 BL iPHONE - it will be bad.

    DO NOT RUN THIS FROM 1.1.2 or 1.1.3. There are a few sources that are offering this package to run straight from 1.1.3 - THIS IS NOT GOOD. You can brick your iPhone. When in 1.1.2 or 1.1.3, this NEEDS to be run from Airplane Mode, which you CANNOT DO from Installer. This is why we currently only have this on 1.1.1. I will say again, IF YOU INSTALL A PACKAGE LIKE THIS WHILE IN 1.1.2 or 1.1.3, YOU CAN BRICK YOUR iPHONE.


    Enjoy!
    This article was originally published in forum thread: Unlock OTB 1.1.2 and 1.1.3 via Installer started by Kyle Matthews View original post
    Comments 344 Comments
    1. lonjevity's Avatar
      lonjevity -
      i believe the final line should read:

      IF YOU INSTALL A PACKAGE LIKE THIS WHILE IN 1.1.2 or 1.1.3, YOU CAN BRICK YOUR iPHONE.

      not

      IF YOU INSTALL A PACKAGE LIKE THIS WHILE IN 1.1.1 or 1.1.2, YOU CAN BRICK YOUR iPHONE.
    1. Thepogcbr900rr's Avatar
      Thepogcbr900rr -
      It will not let me downgrade from 1.1.3, to 1.1.1

      I can get to the part where i point to the firmware file in itunes, but it doesnt complete and i get an error, and then the iphone keeps the plug/itunes icon on the phone.

      My phone is not sim unlocked.

      Any ideas?
    1. ministarsrbije's Avatar
      ministarsrbije -
      I have run this unlock for 1.1.1. and now have bricked iPhone. I was not able to turn on Airplain mode while I wass installing this script. First I lost my WiFi, and later tried to upgrdae to 1.1.3. following someone`s advice and NOW HAVE :

      Phone with out WiFi and not ACTIVATED :-)

      Can someone help me?
    1. yeahright's Avatar
      yeahright -
      Quote Originally Posted by Thepogcbr900rr View Post
      It will not let me downgrade from 1.1.3, to 1.1.1

      I can get to the part where i point to the firmware file in itunes, but it doesnt complete and i get an error, and then the iphone keeps the plug/itunes icon on the phone.

      My phone is not sim unlocked.

      Any ideas?
      Yes, you will need to use iNdependence (Mac) or iBrickr (Windows) to "push" it out of recovery mode. Then, it will be in 1.1.1.
    1. andyorkney's Avatar
      andyorkney -
      Guess I was dead lucky too, I installed the G-Unlock using Installer from iSpazio Unlock Tools source while running 1.1.3 (Dev Team, version was OTB 1.1.2)

      Took less than 3mins, didn't even do a restart before popping the o2 SIM and trying a Vodafone SIM, works without a problem. Have done a few restarts and swapped different sims & all fine.

      Great stuff!
    1. faradaylawsy's Avatar
      faradaylawsy -
      I have just unlocked my 1.1.2 OTB with the new method, every think works fine. thanks!!
    1. birdhouse1575's Avatar
      birdhouse1575 -
      @@@@@@@@@@@@@@@
    1. waz94's Avatar
      waz94 -
      When performing the upgrade from a jailbroken 1.1.1. phone, do i have to use the ATT sim card that came with the phone (obvioulsy doesnt work in Australia) or can i use the sim card that will be in the phone when it is eventually unlocked??
    1. at004's Avatar
      at004 -
      so no need to put in airplane mode while on 1.1.1?
    1. liondesign's Avatar
      liondesign -
      Can I upgrade my 1.1.2 otb now to 1.1.3 bootloader 4.6
    1. Songbird's Avatar
      Songbird -
      I can't seem to get it to work, I just got the iPhone damage message and I gave up.
    1. zozodouce's Avatar
      zozodouce -
      i got up this morning with my new 16gig unlock using t-mobile,i love this place thank you all for everything.now i need to sell my 8gig lol.
    1. iancdp's Avatar
      iancdp -
      Now i can buy a new one
    1. romzyt's Avatar
      romzyt -
      is there a fix that can change 3's to names in 1.1.3. u upgrade to 1.1.3 and now my sms and incoming calls only show numbers not names
    1. mxtreme's Avatar
      mxtreme -
      hmmmm I this geolunlock straigh from 1.1.3 and everythign works like a charm!
    1. kissingguy's Avatar
      kissingguy -
      happy, just made my first i- phone calls and got my first sms's. now I'm on the way to 1.1.3
      thanx a lot
    1. kevin3838's Avatar
      kevin3838 -
      I just wanted to know how many people with otb 1.1.3 have downgraded to 1.1.1 and then with DevTeam upgraded back to 1.1.3. I wanted to know if there were any problems with the final upgrade of 1.1.3.

      Thanks!
    1. thejoeny's Avatar
      thejoeny -
      I'm running an otb 1.1.2 downgraded to 1.1.1 i followed the hackintosh forum process, downloaded the unlock from installer and my phone works! however, now my installer isn't working, the downloads keep timing out. AND my edge network isn't working... other than trying the whole process again is there anything i can do?
      thanks in advance!
    1. Yoyo's Avatar
      Yoyo -
      OK if someone can help because I know I'm missing something simple....

      Downgraded to 1.1.1
      installed OTB G-Unlock, OKtoprep, and bsd subsystems.

      After installing all of these, turned airplane mode on.

      Restored iTunes to 1.1.2....

      After this I am using the *#307# thing and going setting up prefs and jailbreakme.com

      After doing this and setting up never lock, wifi......I then go to jailbreakme.com and it hangs there, it doesn't install anything? Am I missing something? I have even tried using the 1.1.2 jailbreak.zip file and it says that I have to RUN OKtoprep first....I didn't know how to use this, so if anyone can see what I am doing wrong please help a brotha out...

      thanks
    1. lonjevity's Avatar
      lonjevity -
      yoyo here you go:

      http://iphone.unlock.no/OTB112unlock.htm