• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • AnySIM 1.1.3 is out - unlock 1.1.3 iPhone's


    According to Zibri's blog, AnySIM 1.3 (mirror | MMi Mirror) is now available!

    From his blog:

    This is Version 1.3 Of anySIM.
    This version unlocks baseband 4.03_13_g
    It's only for bootblock 3.9 don't use on 4.6
    To use it, upgrade the baseband then
    put the iPhone in airplane mode and run it !
    It works also in JB 113 OS...
    This DOES NOT WORK ON OTB 1.1.3 iPhones!

    Disclaimer: I have not yet tested this, let us know how it works in the comments!

    thanks ericidle for the tip

    Cash Edit
    To find your bootloader version install bbinfo via installer. Run it and it will tell you your bootloader version.
    This article was originally published in forum thread: AnySIM 1.1.3 is out - unlock 1.1.3 iPhone's started by Kyle Matthews View original post
    Comments 279 Comments
    1. SNIP3R_36's Avatar
      SNIP3R_36 -
      I think I just bricked!! I need help!!

      I used the iClarify method to upgrade from 1.1.1 to 1.1.2, then used the dev team soft upgrade to 1.1.3. I was trying to do the bootloader upgrade step and installer kept saying something like "main script falied". I restarted installer, nothing. I then turned my phone off, back on and now I'm stuck at the picture where it wants you to plug into itunes. itunes tells me I'm in recover mode, and I need to restore. can anyone help?
    1. jasonm253's Avatar
      jasonm253 -
      put it in DFU mode and resotre back to 1.1.1 and try try again
    1. hybrid_fx2's Avatar
      hybrid_fx2 -
      Quote Originally Posted by SNIP3R_36 View Post
      I think I just bricked!! I need help!!

      I used the iClarify method to upgrade from 1.1.1 to 1.1.2, then used the dev team soft upgrade to 1.1.3. I was trying to do the bootloader upgrade step and installer kept saying something like "main script falied". I restarted installer, nothing. I then turned my phone off, back on and now I'm stuck at the picture where it wants you to plug into itunes. itunes tells me I'm in recover mode, and I need to restore. can anyone help?
      download ibrickr v0.9 worked for me
    1. SNIP3R_36's Avatar
      SNIP3R_36 -
      Quote Originally Posted by hybrid_fx2 View Post
      download ibrickr v0.9 worked for me
      Will this bring me back to 1.1.3? Also, was your situation the same?
    1. hybrid_fx2's Avatar
      hybrid_fx2 -
      Quote Originally Posted by SNIP3R_36 View Post
      Will this bring me back to 1.1.3? Also, was your situation the same?
      after i changed the baseband through terminal it froze. hard reset game me itunes logo. booted it up with ibrickr and bam 1.1.3 with the correct baseband. ran anysim 1.1.3 unlocked and good to go.
    1. SNIP3R_36's Avatar
      SNIP3R_36 -
      Quote Originally Posted by hybrid_fx2 View Post
      after i changed the baseband through terminal it froze. hard reset game me itunes logo. booted it up with ibrickr and bam 1.1.3 with the correct baseband. ran anysim 1.1.3 unlocked and good to go.
      Ok, THANK YOU, because this got my phone back up, but I can't install the baseband OR anysim. once in installer, the package downloads, then when it goes to install, it still says "Main Script execution failed". did anyone have the same problem?
    1. zozodouce's Avatar
      zozodouce -
      SOLVED !!!

      It is very simple solution, the root cause is: anySIM 1.3 checks in /var/root/Library/Preferences/com.apple.springboard.plist file "SBAutoLockTime" value. So, if you used Official Dev Team 1.1.3 Upgrade this file was moved to /var/mobile/Library/Preferences/ .

      Solution only for iPhone with 1.1.3 (Official Dev Team Release):

      1. Set "Auto-Lock" to "Never"

      2. Rename /var/root/Library/Preferences/com.apple.springboard.plist to /var/root/Library/Preferences/com.apple.springboard.plist.old

      3. Copy /var/mobile/Library/Preferences/com.apple.springboard.plist to /var/root/Library/Preferences/com.apple.springboard.plist

      4. Set "Airplane mode" to ON.

      5. run anySIM 1.3 (now it should run smoothly)

      6. rename /var/root/Library/Preferences/com.apple.springboard.plist.old to /var/root/Library/Preferences/com.apple.springboard.plist

      7. turn "Airplane mode" OFF

      Have Fun!

      Best Regards.
    1. SNIP3R_36's Avatar
      SNIP3R_36 -
      I could only find this file in /private/var/mobile/library/preferences

      If anyone can help me out please go on aim and find PorkWaffle
    1. ZeroSkill's Avatar
      ZeroSkill -
      What'd I say! Worked Like a CHARM!

      Quote Originally Posted by hybrid_fx2 View Post
      I cannot speak for Europe ... But it works mighty fine here in canada, I'm not even in the main urban area. Google maps locates me right on the money and its a cool thing to see with hybrid view.

      On another point does any1 else have the problem of showing up 200MB of "other" in iTunes ?
      Yes It's saying "189.4MB" used by "Others".
    1. DFOGG551's Avatar
      DFOGG551 -
      someone please help me I tried to update to 1.1.2 and it gives me a 1510 error message instead off update complete what do i do

      I will help you if you help me on cre-ation they said that sometimes it does do that but it will reboot after about 10 15 mins that it is normal so wait if you can. Now I have downgraded my phone to 1,1,1 jailbroke it and now I am doing the step to update it to 1.1.2 but it gives me a error of 1510 is this normal what do I do

      Quote Originally Posted by SNIP3R_36 View Post
      I think I just bricked!! I need help!!

      I used the iClarify method to upgrade from 1.1.1 to 1.1.2, then used the dev team soft upgrade to 1.1.3. I was trying to do the bootloader upgrade step and installer kept saying something like "main script falied". I restarted installer, nothing. I then turned my phone off, back on and now I'm stuck at the picture where it wants you to plug into itunes. itunes tells me I'm in recover mode, and I need to restore. can anyone help?
      I will help you if you help me on cre-ation they said that sometimes it does do that but it will reboot after about 10 15 mins that it is normal so wait if you can. Now I have downgraded my phone to 1,1,1 jailbroke it and now I am doing the step to update it to 1.1.2 but it gives me a error of 1510 is this normal what do I do
    1. DFOGG551's Avatar
      DFOGG551 -
      Quote Originally Posted by SNIP3R_36 View Post
      Ok, THANK YOU, because this got my phone back up, but I can't install the baseband OR anysim. once in installer, the package downloads, then when it goes to install, it still says "Main Script execution failed". did anyone have the same problem?

      I will help you if you help me on cre-ation they said that sometimes it does do that but it will reboot after about 10 15 mins that it is normal so wait if you can. Now I have downgraded my phone to 1,1,1 jailbroke it and now I am doing the step to update it to 1.1.2 but it gives me a error of 1510 is this normal what do I do
    1. Insolent Entertainment's Avatar
      Insolent Entertainment -
      I NEED HELP!

      I had 1.0.2 OTB, hadn't activated or jailbroken or ANYTHING. I updated to 1.1.3 through iTunes, which fixed the endless reboot mode problem iBrickr had thrown it into.

      I'm going by the instructions here ( http://www.iclarified.com/entry/index.php?enid=630 ) to downgrade to 1.1.1. Everything's fine until I attempt to boot the phone with iBrickr (Step 5 on that link). The screen stays green and the phone does not reboot. I've tried manually rebooting it and restarting iBrickr again. It's not working.

      What's wrong here?
    1. SNIP3R_36's Avatar
      SNIP3R_36 -
      Quote Originally Posted by DFOGG551 View Post
      I will help you if you help me on cre-ation they said that sometimes it does do that but it will reboot after about 10 15 mins that it is normal so wait if you can. Now I have downgraded my phone to 1,1,1 jailbroke it and now I am doing the step to update it to 1.1.2 but it gives me a error of 1510 is this normal what do I do
      I wish I could help you, I didn't get that error. what guide are you using? I used the tutorial here - http://www.iclarified.com/entry/index.php?enid=461
    1. fat x nub's Avatar
      fat x nub -
      Quote Originally Posted by Megahalo View Post
      Can someone post the 04.03 baseband? I have AT&T and I don't see the point of unlocking my SIM since I don't need to, but having an unlocked .03 baseband would be awesome.
      why would that be awesome? there is no point for u to do it unless u plan on switching to T-Mobile

      Quote Originally Posted by Insolent Entertainment View Post
      I NEED HELP!

      I had 1.0.2 OTB, hadn't activated or jailbroken or ANYTHING. I updated to 1.1.3 through iTunes, which fixed the endless reboot mode problem iBrickr had thrown it into.

      I'm going by the instructions here ( http://www.iclarified.com/entry/index.php?enid=630 ) to downgrade to 1.1.1. Everything's fine until I attempt to boot the phone with iBrickr (Step 5 on that link). The screen stays green and the phone does not reboot. I've tried manually rebooting it and restarting iBrickr again. It's not working.

      What's wrong here?
      u are using the wrong ibriker....use the 1.1.3 jailbreak special edition ibriker and just let it run...do not click on anything and ur phone will be taken out of DFU mode
    1. Insolent Entertainment's Avatar
      Insolent Entertainment -
      Quote Originally Posted by fat x nub View Post
      u are using the wrong ibriker....use the 1.1.3 jailbreak special edition ibriker and just let it run...do not click on anything and ur phone will be taken out of DFU mode
      I downloaded it.

      It's stuck on "checking your phone" for about 5 minutes.
    1. b-ballstyle's Avatar
      b-ballstyle -
      I udapted perfectly and unlock it but when i do the google's locate me feature, it point me like 5-10 km or miles away... ( I live in Canada) Why is that !?
    1. Croatian's Avatar
      Croatian -
      so i have an week 29 iPhone unlocked and jailbroken running 1.1.2
      i upgraded from 1.1.1 to 1.1.2 by downloading firmware on iTunes, then jailbraking it and then unlocking it with AnySim 1.2u

      now if i wanna upgrade to 1.1.3 and have it jailbroken and unlocked
      what do i need to do

      i am getting lil confused with this unlock jailbrak, downgrade, upgrade, downgrade, restore and what not


      thank you
    1. cky.dude's Avatar
      cky.dude -
      Quote Originally Posted by Insolent Entertainment View Post
      I NEED HELP!

      I had 1.0.2 OTB, hadn't activated or jailbroken or ANYTHING. I updated to 1.1.3 through iTunes, which fixed the endless reboot mode problem iBrickr had thrown it into.

      I'm going by the instructions here ( http://www.iclarified.com/entry/index.php?enid=630 ) to downgrade to 1.1.1. Everything's fine until I attempt to boot the phone with iBrickr (Step 5 on that link). The screen stays green and the phone does not reboot. I've tried manually rebooting it and restarting iBrickr again. It's not working.

      What's wrong here?
      try to use Apptap instaler to reboot it
    1. hybrid_fx2's Avatar
      hybrid_fx2 -
      Quote Originally Posted by Croatian View Post
      so i have an week 29 iPhone unlocked and jailbroken running 1.1.2
      i upgraded from 1.1.1 to 1.1.2 by downloading firmware on iTunes, then jailbraking it and then unlocking it with AnySim 1.2u

      now if i wanna upgrade to 1.1.3 and have it jailbroken and unlocked
      what do i need to do

      i am getting lil confused with this unlock jailbrak, downgrade, upgrade, downgrade, restore and what not


      thank you
      1) Change your baseband using the program on installer (dont know what its called i did it manually)
      2)soft upgrade to 1.1.3
      3) airplane mode - never lock - run anysim 1.1.3
    1. ChrisGVE's Avatar
      ChrisGVE -
      I tried it all, tried what zozodouce was suggesting but I still end up with

      "You must set Auto-Lock to "Never" in Settings () to continue. anySIM will now quit."...

      Any help would be appreciated here