• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • AnySIM 1.1.3 is out - unlock 1.1.3 iPhone's


    According to Zibri's blog, AnySIM 1.3 (mirror | MMi Mirror) is now available!

    From his blog:

    This is Version 1.3 Of anySIM.
    This version unlocks baseband 4.03_13_g
    It's only for bootblock 3.9 don't use on 4.6
    To use it, upgrade the baseband then
    put the iPhone in airplane mode and run it !
    It works also in JB 113 OS...
    This DOES NOT WORK ON OTB 1.1.3 iPhones!

    Disclaimer: I have not yet tested this, let us know how it works in the comments!

    thanks ericidle for the tip

    Cash Edit
    To find your bootloader version install bbinfo via installer. Run it and it will tell you your bootloader version.
    This article was originally published in forum thread: AnySIM 1.1.3 is out - unlock 1.1.3 iPhone's started by Kyle Matthews View original post
    Comments 279 Comments
    1. ryan christopher's Avatar
      ryan christopher -
      im not sure, mine was set to auto lock and it ran fine
    1. nickh's Avatar
      nickh -
      Quick Q,

      Could some shed some light.. I am currently on 1.1.3 jb with 04.02.13_G, What is the advantage(s) of going up to 04.03.13_G??

      Cheers,
      Nick.
    1. UV RAYS's Avatar
      UV RAYS -
      Quote Originally Posted by canadoc View Post
      yes you can do it that way, or if you prefer to not go trough the up and down grading of firmware to 1.1.3--1.1.1---1.1.2-----soft 1.1.3
      just do as I posted earlier to take your 1.1.3 jb phone and flash its baseband to 1.1.3
      Nothing will be lost.
      Okay, this is what I and others will want to do, but How Can I do this? Instructions would be appreciated..
    1. steve_k's Avatar
      steve_k -
      any problems yet? i've encounter all the errors that take a billion years and many different computers to unbrick my phone.
    1. UV RAYS's Avatar
      UV RAYS -
      How do the people on 1.1.3 dev team jb flash the baseband to 1.1.3???
    1. Eurisko's Avatar
      Eurisko -
      What's the source for BBInfo? I can't find it anywhere
    1. DFOGG551's Avatar
      DFOGG551 -
      I really need help from you with my phone if you get this let me know if you can help me instead of me typing it out and you dont answer back
    1. jkfox121's Avatar
      jkfox121 -
      Quote Originally Posted by canadoc View Post
      yes you can do it that way, or if you prefer to not go trough the up and down grading of firmware to 1.1.3--1.1.1---1.1.2-----soft 1.1.3
      just do as I posted earlier to take your 1.1.3 jb phone and flash its baseband to 1.1.3
      Nothing will be lost.
      I used your method, worked perfect, easy and fast. Thanks a lot for the help!
    1. DFOGG551's Avatar
      DFOGG551 -
      I really need help from you with my phone if you get this let me know if you can help me instead of me typing it out and you dont answer back
    1. Zach23's Avatar
      Zach23 -
      Quote Originally Posted by jkfox121 View Post
      I used your method, worked perfect, easy and fast. Thanks a lot for the help!
      How did u flash your baseband?? Do u just upgrade?
    1. DFOGG551's Avatar
      DFOGG551 -
      Can you help me I accidently upgrade my phone to 1.13 about 2 weeks ago and I have as bass of 4.3.13G I have managed to downgrade to 1.1.1 and jailbreak it but I am havimg problems with getting my phone back activated with my sim I g=have att service and a att sim and I really need help please
    1. jasonm253's Avatar
      jasonm253 -
      what source do i use to upgrade baseband? is it installer...i am on nates jailbreak...will it work for that or does it matter? all i have to do is just flash it and it will work?
    1. vomer's Avatar
      vomer -
      Quote Originally Posted by UV RAYS View Post
      How do the people on 1.1.3 dev team jb flash the baseband to 1.1.3???
      yes how does the nate/dev team jailbroken phones upgrade the bb without downgrading?
    1. jasonm253's Avatar
      jasonm253 -
      im waiting for this answer too...if all i have to do is update the BB And not do anything else then thats all good. im on 1.1.3 nates JB!
    1. canadoc's Avatar
      canadoc -
      This is how you reflash your baseband so if you are already JB on 1.1.3 with 1.1.2. baseband you no longer have to upgrade to 1.1.3 then downgrade to 1.1.1 then JB to 1.1.2 and then JB to 1.1.3 again:

      For those like me who are happy with a working dev team 1.1.3 Jb phone and don't feeling going up to 1.1.3 for the new baseband and back down to 1.1.1 and then to 1.1.2 and 1.1.3 all over and losing all the stuff on their phone again there is an easier quicker way...........

      hxxp://rapidshare.com/files/89514566/reflash.zip.html I have created a folder with the files needed to go from 1.1.2 baseband to 1.1.3 baseband. Here you can find bbupdater, ieraser the 1.1.2 seczone and the 1.1.3 fls and eep files.

      Download and unzip the folder.
      SSH the folder onto your phone.

      Install ulctl and vt 100 apps from installer (note vt 100 needs some permissions changes since 1.1.3 and likely won't work. However if add this repo- http://www.trejan.com/irepo there is a fix in installer)

      Run ulctl and unload the apple commcenter plist

      in terminal(vt 100 downloaded from installer) on iphone login (password is alpine) at prompt type:
      cd /
      cd reflash
      chmod 777 *
      ./ieraser
      ./bbupdater -f *fls -e *eep
      then check to make sure bl and baseband is correct using:
      bbupdater -v
      if ok, then type:
      reboot

      You now have the new baseband and are still in the dev team 1.1.3 jb.

      You can now remove that file called reflash if you want to.

      Now you can install anysim 1.1.3 from iclarified repository. Run Anysim 1.3 after putting phone into Airplane mode .

      Voila 1.1.3 unlocked baseband
    1. Erik-'s Avatar
      Erik- -
      Worked like a charm!
      Thank you!
    1. lildevil's Avatar
      lildevil -
      Hey Guys,

      Would like to just check on something, if i have a 1.13 OTB, can i downgrade to 1.1.1 then jailbreak my way to 1.1.3 again then use anysim?
      Sorry for the Noob question as i dont really understand. Thanks
    1. liv2wrshp's Avatar
      liv2wrshp -
      Quote Originally Posted by canadoc View Post
      Ok guys here is the goods on the unlocks!

      AnySim 1.3 was apparently prematurely released by Zibri and some argue he was stealing credit. Regardless I have done it and it works fine. Even on reboot of phone.
      Google locate me works without the Navizon/locate me 3rd party app workaround.

      For those like me who are happy with a working dev team 1.1.3 Jb phone and don't feeling going up to 1.1.3 for the new baseband and back down to 1.1.1 and then to 1.1.2 and 1.1.3 all over and losing all the stuff on their phone again there is an easier quicker way...........

      on this person's site : http://george.zjlotto.com/
      you can find bbupdater, ieraser the 1.1.2 seczone and the 1.1.3 fls and eep files.
      What I did.....
      SSH and made a new folder on iphone called reflash. Then I put the 1.1.2 seczone and the other files listed above into it.

      install ulctl and vt 100 apps from installer (not vt 100 needs some permissions changes since 1.1.3 which on can find out how do do that on same blog site mentioned above)

      run ulctl and unload the apple commcenter plist
      in terminal(vt 100 downloaded from installer) on iphone at prompt type:
      cd /
      cd reflash
      chmod 777 *
      ./ieraser
      ./bbupdater -f *fls -e *eep
      then check to make sure bl and baseband is correct using:
      bbupdater -v
      if ok, then type:
      reboot

      You now have the new baseband and are still in the dev team 1.1.3 jb.

      You can now remove that file called reflash if you want to.

      Now you can run anysim 1.1.3 as described in iclarified tutorial. (remeber to put in airplane mode when running any sim 1.1.3)


      Note: Geohot has an unlock out also for 1.1.3 using the ipsf type method which purportedly will survive future upgrades. This remains to be seen of course. Also, for the moment it also requires running another program called signal.app anytime you reboot your phone or replace the sim card. This workaround can be automated, but to me is of concern as if it fails somehow yo might be out of luck to use the phone. It also requires backing up and saving your seczone in case something goes wrong and you have to revert.
      Is there an easier way to do this? I'm about to leave for a business trip and don't want to mess anything up. I'm on a jb 1.1.3 using Nate's method and would love the new modem firmware.
    1. ryan christopher's Avatar
      ryan christopher -
      If you are already on 1.1.3 soft upgraded then this is how you upgrade the baseband.
      I have officially test this and it worked 100%.

      go to http://george.zjlotto.com/
      at the top of the screen click where it says "pull" and click "secpacks" and download the 1.1.2 secpack.

      then go back to the homepage.
      scroll down to where it says "Various Baseband FLS/EEP Files"
      download the files "ICE04.03.13_G.fls" and "ICE04.03.13_G.eep"

      then scroll down to where it say "Baseband 04.03.13_G Secpack"
      download "BBupdater" and "ieraser"

      then ssh into your phone and put the new anysim under your applications folder.
      then go to your "/" folder and make a new folder named "reflash"
      put all of the files i told you to download in the reflash folder.

      then go to installer and download "ulctl" and "Term-vt 100 apps from installer.
      then download "SUID Lib Fix" and "Term-vt1000 SUID Fix"

      run ulctl and click the apple commcenter plist and click upload
      close ulctl and run terminal and put in your password for ssh and type the following commands:

      cd /
      cd reflash
      chmod 777 *
      ./ieraser
      ./bbupdater -f *fls -e *eep

      (let the phone do its thing before you enter the next line)

      then after your done type
      reboot

      once your phone reboots go to settings, general and make sure auto lock is set to never.

      put your phone in airplane mode and run anysim, after it is done you can turn off airplane mode and you are now at the 1.1.3 baseband

      you can then ssh into your phone and delete the "reflash" folder.