• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • 1.1.3 Jailbreak Goes Public!
    Per NateTrue's blog, the 1.1.3 jailbreak is official! UPDATE: The jailbreak is now for Windows and OS X both. Here's the OS X jailbreak download. (non-member mirror)

    You must have a 1.1.1 or 1.1.2 jailbroken iPhone already for this to work (or jailbreak yours).

    Here's the brief details, before we get our full guide up:

    - Start with a 1.1.1 or 1.1.2 jailbroken phone with Installer.app installed.
    - Plug in your phone via USB to your computer.
    - Download, extract, and run iBrickr Special 1.1.3 jailbreak edition (non-member mirror) (ibrickr.exe in the archive).
    - iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
    - iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
    - iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
    - When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the "1.1.3 soft upgrade" package. Do that.
    - When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.
    Note: There is a bit of controversy surrounding this release. It seems NateTrue and the iPhone Dev Team have parted ways over this release - they believe the legality is questionable, NateTrue believes it is within rights. MMi remains neutral until more info is released. At the moment, it seems there's a rumble in the Bronx, so to speak.

    Update: from NateTrue:
    And zdziarski thinks there's more in the patches than there really is. It's just identifying pieces, so that the patcher software knows where to cut and paste and modify. And some kernel caches. Nothing big.
    This article was originally published in forum thread: 1.1.3 Jailbreak Goes Public! started by Kyle Matthews View original post
    Comments 1081 Comments
    1. snwbrdr113's Avatar
      snwbrdr113 -
      Quote Originally Posted by maXimus View Post
      MAKE SURE YOU UNINSTALL ALL 3RD PARTY APPS (Except BSD Subsystem) BEFORE BEGINNING SO THAT YOU CAN SAFELY INSTALL THEM AFTERWARDS. MOST OF THEM ALREADY WORK. IF YOU ARE ONE OF THOSE THAT UPGRADED WITHOUT UNINSTALLING THEM FIRST AND NOW HAVE TROUBLE WITH THE APPS, FOLLOW THESE INSTRUCTIONS:

      1) Install MobileFinder (if you already had it, uninstall it and install again)
      2) Launch MobileFinder from the springboard.
      3) Tap "Settings" and turn on "System File Access"
      4) Tap "Finder" then "Up". You should be in the file system now.
      5) Navigate to private/var/root/Library/Installer/ and delete LocalPackages.plist
      6) Reinstall Community Sources, BSD subsystem and OpenSSH.
      7) Reinstall the rest of your 3rd party apps.

      *You should also delete the 300+MB file (113_upgrade_image.bin) from /var/root/media/softupdate that was used during the jailbreak.

      You now may use WinSCP! The username is "mobile" and the password is "alpine"!
      i followed this guide and it seemed like it was wokring but now the only
      thing I can download is community sources... ive tried about 30 other packages and all of them get the "main script execution failed" message... I also tried reinstalling installer app but it simply exits to springboard sometimes... or returns to the installer main menu... has anyone had this problem or does anyone know how i could possibly fix this? help would greatly be appreciated.
    1. maXimus's Avatar
      maXimus -
      Quote Originally Posted by snwbrdr113 View Post
      i followed this guide and it seemed like it was wokring but now the only
      thing I can download is community sources... ive tried about 30 other packages and all of them get the "main script execution failed" message... I also tried reinstalling installer app but it simply exits to springboard sometimes... or returns to the installer main menu... has anyone had this problem or does anyone know how i could possibly fix this? help would greatly be appreciated.
      Did you install BSD Subsystem before attempting to install anything else?
    1. b-ballstyle's Avatar
      b-ballstyle -
      I want to back up my phone and I dont know where are situated important data... Is anybody know where are situated my contacts, my sms messages and my installer sources ??
      Thankss
    1. snwbrdr113's Avatar
      snwbrdr113 -
      Quote Originally Posted by maXimus View Post
      Did you install BSD Subsystem before attempting to install anything else?
      yes it gets the same "main script execution failed" as everything else...
    1. riku98523's Avatar
      riku98523 -
      IPOD TOUCH 8GB Works.

      *DO NOT UPDATE*

      Updating the ipod touch 8GB will work but it is pointless. Because first you have to go through all this stuff until you finally get it updated. You have to remove your apps etc. Takes a bunch of time and then when you are finally done You will notice all you did was lose stuff. You cant move icons around on the touch you have to pay $20 for that which imo is stupid if all you want is moving the icons around. You can get the mail and stuff from installer anyway.
    1. rohit_baba's Avatar
      rohit_baba -
      I have 1.1.2 iphone wich is jailbroken and unloked, so it is working on all networks. I am using orange sim in uk, all though the phone was bought from US and it came with version 1.1.1.

      If i performe this upgrade, then what will heppend in regards to using other network on it or will i be locked to at&t again?

      I will be doing upgrade on Mac,

      I already have 1.1.3 softupgrade in my installer.app from ste packaging. is this good inough or need to get some other souce to do this for me.

      I would only like to performe this step if the phone can be used on other network later. if this is possible then what do i do once i have installed 1.1.3 soft upgrade.

      please advice asap, either reply here, or u can send me email on [email protected].

      thanks for your help
    1. ajl917's Avatar
      ajl917 -
      Guys, any news on the ACTUAL Dev Team's release of a 1.1.3 jailbreak? I have AT&T, jailbroken, but I would like this to be a smooth JB like 1.1.1 or at least something close without all of the side effects like ringtones, mail, iTunes store, other space etc...
    1. stler's Avatar
      stler -
      this is how far i got on 1.1.3 jailbreak if u need any help dnt hesitate to ask
    1. stler's Avatar
      stler -
      this is a custom theme i made hope u like enjoy!!!!!!!
    1. Robbyg's Avatar
      Robbyg -
      Hi where is the windows download for the 1.1.3 upgrade cheers
    1. pajarojamal@gmail.com's Avatar
      Quote Originally Posted by fernandoborjas View Post
      Worked For me 100% on my 1.1.2 iphonesimfree unlocked.
      Fernandoborjas, can you tell me how you did this. I also have 1.1.2 ipsf and I'm confused on this.

      If you have 1.1.2 unlocked and working on a network other than AT&T, can you update to 1.1.3 and have it working on a different network? What if you used ipsf? Does anybody here have 1.1.3 unlocked with a different network? If so how (what did you use, anysim, or any other programs like that)?
      Thanks
    1. brant8624's Avatar
      brant8624 -
      my sms messages r also out of order, i hope there is a fx for that soon.
    1. nemo123's Avatar
      nemo123 -
      I upgraded to1.1.3 and did a sync with itunes and it is saying that I have 4GB's of other space filled on my iphone. I am asuming this is programs but I have gone to installer and removed everything and it is saying the same thing.

      Anyone have an answer to this problem.

      Thanks
    1. maXimus's Avatar
      maXimus -
      Quote Originally Posted by maXimus View Post
      Can I get a few of you heavy SMS users to please check your messages to see if they are now randomly out of order. I have noticed that on both of the 1.1.2 OTB's I upgraded and jailbroke, the SMS messages have rearranged themselves and are out of order. They stay in order as long as I don't leave the conversation and continue to message but once I leave and go back, they are out of order.
      WTF!

      Would it kill anyone to try this????
    1. kuhnesito's Avatar
      kuhnesito -
      I have to say the ringtone fix doesn't work.

      this
      http://romhustler.net/download/psx/4086

      is not really a fix, rather a workaround, it replaces all your default ringtones with files that actualy work and to top that off it doesnt work with ringtones you previewsly purchased in itunes.
    1. minitrk's Avatar
      minitrk -
      Quote Originally Posted by maXimus View Post
      WTF!

      Would it kill anyone to try this????

      1.1.2 jailbreak to 1.1.3 jailbreak

      my sms are in order
    1. bosco0633's Avatar
      bosco0633 -
      Well everything is fine except my sms text. For some reason since the upgrade, I can only text people on the same network as me. I am on rogers, so people on rogers get my text messages.

      If I text someone on say bell, it will not go through and they cant message me. My program shows the message sent but it is not working.

      It worked with the 1.1.2 but now it is not. Can anyone provide any detail.
    1. ajl917's Avatar
      ajl917 -
      Quote Originally Posted by Robbyg View Post
      Hi where is the windows download for the 1.1.3 upgrade cheers
      Check the 1st post...
    1. MattOnDemand's Avatar
      MattOnDemand -
      Quote Originally Posted by maXimus View Post
      WTF!

      Would it kill anyone to try this????
      1.1.2 jailbreak/unlock --> 1.1.3 jailbreak
      My SMS texts are still in tact and in order.

      Quote Originally Posted by bosco0633 View Post
      I can only text people on the same network as me. I am on rogers, so people on rogers get my text messages.

      If I text someone on say bell, it will not go through and they cant message me. My program shows the message sent but it is not working.
      Mine works no problem.
    1. maciekdj's Avatar
      maciekdj -
      Works great!!! Thanks