• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • 1.1.3 Jailbreak Goes Public!
    Per NateTrue's blog, the 1.1.3 jailbreak is official! UPDATE: The jailbreak is now for Windows and OS X both. Here's the OS X jailbreak download. (non-member mirror)

    You must have a 1.1.1 or 1.1.2 jailbroken iPhone already for this to work (or jailbreak yours).

    Here's the brief details, before we get our full guide up:

    - Start with a 1.1.1 or 1.1.2 jailbroken phone with Installer.app installed.
    - Plug in your phone via USB to your computer.
    - Download, extract, and run iBrickr Special 1.1.3 jailbreak edition (non-member mirror) (ibrickr.exe in the archive).
    - iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
    - iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
    - iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
    - When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the "1.1.3 soft upgrade" package. Do that.
    - When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.
    Note: There is a bit of controversy surrounding this release. It seems NateTrue and the iPhone Dev Team have parted ways over this release - they believe the legality is questionable, NateTrue believes it is within rights. MMi remains neutral until more info is released. At the moment, it seems there's a rumble in the Bronx, so to speak.

    Update: from NateTrue:
    And zdziarski thinks there's more in the patches than there really is. It's just identifying pieces, so that the patcher software knows where to cut and paste and modify. And some kernel caches. Nothing big.
    This article was originally published in forum thread: 1.1.3 Jailbreak Goes Public! started by Kyle Matthews View original post
    Comments 1081 Comments
    1. thorne1022's Avatar
      thorne1022 -
      the iphone will reboot on its own but it will take about or up to 10 minutes i did it for my friens iphone and it workes also I tried it on the pc program I dont know about the mac program for more info go to www.hackthatphone.com it will help
    1. kuhnesito's Avatar
      kuhnesito -
      Quote Originally Posted by StealthBravo View Post
      http://cre.ations.net/blog

      Nate describes all the problems your having
      I don't see him adressing the ringtone problem, or did I miss anything?
    1. er1cc's Avatar
      er1cc -
      Can WE Activate 1.1.3.OTB iPhone with ibrickr-jb113 ?
      WBR !
    1. ubik's Avatar
      ubik -
      okay, so here what i did. (i was on 1.1.1 unlocked jailbreaked.)
      using mac. downloaded jb113, started it. everything went fine.
      till the MAIN SCRIPT ERROR message popped up.i did nothing for five minutes.restarted it.and tadaa 1.1.3.all apps were gone.but i didnt had them in the installer.and as well not on the phone.(it seem that the applications folder was cleaned).so i downloaded some apps.and they seem to work fine..
    1. DVB+'s Avatar
      DVB+ -
      Quote Originally Posted by ks503 View Post
      To make this question easier. I bought my phone less than a month ago. What boot loader did my come with? 3.9 or newer?
      check 4and5 digit of your serial...if bigger than 44 then it is 4.6
    1. maXimus's Avatar
      maXimus -
      MAKE SURE YOU UNINSTALL ALL 3RD PARTY APPS (Except BSD Subsystem) BEFORE BEGINNING SO THAT YOU CAN SAFELY INSTALL THEM AFTERWARDS. MOST OF THEM ALREADY WORK. IF YOU ARE ONE OF THOSE THAT UPGRADED WITHOUT UNINSTALLING THEM FIRST AND NOW HAVE TROUBLE WITH THE APPS, FOLLOW THESE INSTRUCTIONS:

      1) Install MobileFinder (if you already had it, uninstall it and install again)
      2) Launch MobileFinder from the springboard.
      3) Tap "Settings" and turn on "System File Access"
      4) Tap "Finder" then "Up". You should be in the file system now.
      5) Navigate to private/var/root/Library/Installer/ and delete LocalPackages.plist
      6) Reinstall Community Sources, BSD subsystem and OpenSSH.
      7) Reinstall the rest of your 3rd party apps.

      *You should also delete the 300+MB file (113_upgrade_image.bin) from /var/root/media/softupdate that was used during the jailbreak.

      You now may use WinSCP! The username is "mobile" and the password is "alpine"!
    1. ks503's Avatar
      ks503 -
      Quote Originally Posted by DVB+ View Post
      check 4and5 digit of your serial...if bigger than 44 then it is 4.6
      Thanks. Mine # is 50. So its a 4.6. Does that mean i CANNOT downgrade unless i do the hardware method? OR can i still restore it to 1.1.1?
    1. boukisny's Avatar
      boukisny -
      i did all the steps thus it worked but when i rebooted it stays on the apple icon and it want start the phone i have tryed holting power and home but it did not wirk any sujestions
    1. Helnaw69's Avatar
      Helnaw69 -
      Iphone Ringtone Maker has updated beta 2.1 works on NON jailbroken 1.1.3 FYI
    1. agentfubu's Avatar
      agentfubu -
      Argh!

      I've tried this 3 times and all 3 times it's given me the plug into itunes logo to restore it. Is this just my computer? Or my phone?
    1. BigWalsh's Avatar
      BigWalsh -
      I have 4.6 and i downgraded to 1.1.1. You will lose all phone and edge functions if you downgrade a phone w/ 4.6 boot., Apparently, after you upgrade to a jailbroken 1.1.3 you can restore these functions by downloading lockdownd and placing it in /usr/libexec.
    1. BigWalsh's Avatar
      BigWalsh -
      Quote Originally Posted by ks503 View Post
      Thanks. Mine # is 50. So its a 4.6. Does that mean i CANNOT downgrade unless i do the hardware method? OR can i still restore it to 1.1.1?
      I have 4.6 and i downgraded to 1.1.1. You will lose all phone and edge functions if you downgrade a phone w/ 4.6 boot., Apparently, after you upgrade to a jailbroken 1.1.3 you can restore these functions by downloading lockdownd and placing it in /usr/libexec.
    1. dragonpac's Avatar
      dragonpac -
      Quote Originally Posted by Cowboyfromhell4 View Post
      i think it's kind of ironic, dev team goes against apples wishes, nate goes against dev teams wishes. they kick nate out. hmmm

      so if i do go thru this jail break (86% into the 1.1.3 firmware download) u think the dev team will screw everyone that used it somehow?
      Couldn't have said it better myself!
    1. iName's Avatar
      iName -
      i jailbroke 1.1.3 (which i now regret) and would like to downgrade to a jailbroken 1.1.1 anyone know where the instructions are to do that or if it is even possible?
    1. Alpha Zero's Avatar
      Alpha Zero -
      My attempts at downgrading are failing. Anyone want to help me out through AIM? Please PM me. Thanks.
    1. timbo's Avatar
      timbo -
      Does with work with iPod Touch?
    1. coreym@cfl.rr.com's Avatar
      Quote Originally Posted by knowtheobscure View Post
      Hey guys... not sure if this has been posted yet but here is a GOOGLE MAPS LOCATE ME FIX..


      http://www.hackint0sh.org/forum/showthread.php?t=25078
      I upgraded using the MAC method last nght and EVERYTHING worked except the google maps locate and hybrid. I had custom and stock ringtones, iTunes store worked I was very happy, after trying to figure out the maps thing I just ened up getting impatient and just doing a total resore I will probably try to do the downgrade and start all over later tonight
      I should of just been happy with what I had!!!!!! I could not get iSitcher to work or SSH (I knew that sumerboard and customize did not work.

      SSH did not accept my usernames and password have they changed?


      By the way my hybrid still does not work any ideas?
    1. ryan christopher's Avatar
      ryan christopher -
      so is it safe to delete the soft update folder?
    1. ame235's Avatar
      ame235 -
      I have a big problem..
      after 1.1.3 upgrade/jailbreak, everything was fine, then i wanted to play a bit with springboard...made a mistake,
      removed /System/Library/LaunchdDaemons/com.apple.springboard.plist

      Phone was set to boot in verbose, so no prob i see it's running, but it hangs there running with no springboard..
      so it connects to my wifi, and hangs.

      I ssh'd it to try repairing, i have no backup of the removed file.
      Only way to get it to work is command:
      Code:
      exec /System/Library/CoreServices/SpringBoard.app/SpringBoard
      which starts my springboard and gets me to "enter code" screen. after that iphone is fully operational. and working, until the next reboot.

      any ideas how to get it back to start again automatically on boot?

      PS: already tried uploading a googled com.apple.springboard.plist file, does not work, maybe getting a true 1.1.3 would?
      any help welcome!
    1. ks503's Avatar
      ks503 -
      Quote Originally Posted by BigWalsh View Post
      I have 4.6 and i downgraded to 1.1.1. You will lose all phone and edge functions if you downgrade a phone w/ 4.6 boot., Apparently, after you upgrade to a jailbroken 1.1.3 you can restore these functions by downloading lockdownd and placing it in /usr/libexec.
      Is this 100% true? I have the lockownd file. I just need to be sure the lockownd file will fix the phone if i do succeed in jailbreaking it.