• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • 1.1.3 Jailbreak Goes Public!
    Per NateTrue's blog, the 1.1.3 jailbreak is official! UPDATE: The jailbreak is now for Windows and OS X both. Here's the OS X jailbreak download. (non-member mirror)

    You must have a 1.1.1 or 1.1.2 jailbroken iPhone already for this to work (or jailbreak yours).

    Here's the brief details, before we get our full guide up:

    - Start with a 1.1.1 or 1.1.2 jailbroken phone with Installer.app installed.
    - Plug in your phone via USB to your computer.
    - Download, extract, and run iBrickr Special 1.1.3 jailbreak edition (non-member mirror) (ibrickr.exe in the archive).
    - iBrickr will determine what firmware you are running on your phone and make sure you can run the update.
    - iBrickr will then guide you through the process of obtaining and modifying the 1.1.3 firmware (make sure to read everything thoroughly).
    - iBrickr will upload the new firmware image to your phone. Note that this only puts the file on your phone and does not modify it at all, yet.
    - When iBrickr finishes (should take about 10 minutes), it will tell you to go to Installer and install the "1.1.3 soft upgrade" package. Do that.
    - When the installer finishes (this should take another 10-15 minutes), your phone should reboot with a fresh activated 1.1.3 firmware.
    Note: There is a bit of controversy surrounding this release. It seems NateTrue and the iPhone Dev Team have parted ways over this release - they believe the legality is questionable, NateTrue believes it is within rights. MMi remains neutral until more info is released. At the moment, it seems there's a rumble in the Bronx, so to speak.

    Update: from NateTrue:
    And zdziarski thinks there's more in the patches than there really is. It's just identifying pieces, so that the patcher software knows where to cut and paste and modify. And some kernel caches. Nothing big.
    This article was originally published in forum thread: 1.1.3 Jailbreak Goes Public! started by Kyle Matthews View original post
    Comments 1081 Comments
    1. Luxocrat's Avatar
      Luxocrat -
      Quote Originally Posted by viP4x View Post
      Any ideas, what I want to do is ... 1.1.3 -->> 1.1.1 .--->> 1.1.2 -->> 1.1.3

      Im on step 2, 1.1.1 ... I want to update 1.1.2, any help ?
      What method did you use to downgrade from 1.1.3?
    1. viP4x's Avatar
      viP4x -
      Ok, solved. I was hitting RESTORE, instead of UPDATE! OUCH!
    1. adrian1480's Avatar
      adrian1480 -
      Well I'm all set.

      I upgraded to the standard 1.1.3-->1.1.1-->jailbreak 1.1.1--->okaytoprep-->1.1.2--->jailbreak 1.1.2-->Nate's 1.1.3 jailbreak --> jailbreak 1.1.3.

      everything works perfectly. I also had to do a couple of boss updates to fix e-mail passwords not storing.
    1. sziklassy's Avatar
      sziklassy -
      I made a sepparate post but Ill do one here too i guess.
      I think the file that was used to update to 1.1.3 is still on my phone.

      My total storage reads as 7.3 GB
      My available storage reads as 7.1 GB

      What files do I need to delete via SSH to get all my space back?
    1. Dark246's Avatar
      Dark246 -
      I just upgraded to 1.1.3 jailbreak and everything works fine, just I have a random 183 mb of space used up
      I used the 1.1.3 soft upg. Cleaner that removes the 300 mb file, but I still have that random 183 mb.
      How can I get rid of that?
    1. ripped53's Avatar
      ripped53 -
      Quote Originally Posted by adrian1480 View Post
      Well I'm all set.

      I upgraded to the standard 1.1.3-->1.1.1-->jailbreak 1.1.1--->okaytoprep-->1.1.2--->jailbreak 1.1.2-->Nate's 1.1.3 jailbreak --> jailbreak 1.1.3.

      everything works perfectly. I also had to do a couple of boss updates to fix e-mail passwords not storing.
      Can you verify that your google maps "Locate me" is working and if your Edge icon is displayed? I know these are general problems, but when people say everything works perfectly I assume they mean EVERYTHING, and if thats the case I'd love to know how you did it or what I may be doing wrong.
    1. atm_10142k's Avatar
      atm_10142k -
      i tried both win and mac version. Had to restore both phones back to 111 the back to 112 the Nate jailbreak breaks the audio core so the only thing that work wheb getting called is vibrate. all stock and custom ring tones dont make a sound. so youll miss calls. so I suggest wait for the offical one. i quote from hack that phone here "Official iPhone Dev Team jailbreak for 1.1.3 coming soon! If you used the unofficial version you MUST restore back to 1.1.1 and get back to jailbroken 1.1.2 to update. The unofficial version breaks an important system manager and you will have serious issues if you put the official jailbreak onto your current jailbreak."
    1. Dark246's Avatar
      Dark246 -
      My jailbreak for 1.1.3 is working fine
      Ill probably revert to the newer one when its release, but until then. Im happy
    1. adrian1480's Avatar
      adrian1480 -
      Quote Originally Posted by Luxocrat View Post
      What method did you use to downgrade from 1.1.3?
      http://www.modmyi.com/forums/showthread.php?t=27454

      Quote Originally Posted by ripped53 View Post
      Can you verify that your google maps "Locate me" is working and if your Edge icon is displayed? I know these are general problems, but when people say everything works perfectly I assume they mean EVERYTHING, and if thats the case I'd love to know how you did it or what I may be doing wrong.
      Yes, I can. it all works perfectly. I followed this guide:

      http://www.modmyi.com/forums/showthread.php?t=27454

      Just follow the OP and the remaining comments in that thread for clean-up issues.

      Everything works perfectly.
    1. Sully's Avatar
      Sully -
      Ok so i started with a 1.1.1 jailbroken, with only BSD Sub installed. Used the ibrickr 1.1.3 updater, and went through the process of the upgrade. Everything went fine, replaced the lockdown file, and rebooted. Again everything was fine, while surfing the Installer sources, i found the 300MB removal app. Figuring this would be a nice clean up app, i installed it. The phone immediately popped over to a restore/error mode. Emergency call only. Totally unaccessible, phone locked out. Nothing I do can remove it from this state short of repeating the process all over again.

      Well I've learned my lesson, I thought I learned my lesson with the previous 1.1.2 issue and rushing to get it updated. I'll be returning my iPhone to the 1.1.2 unlocked state and will leave it until Dev Team officially releases something more reliable.
    1. zlinger's Avatar
      zlinger -
      This build of 1.1.3 nuked my iPhone today. I spent half of the day trying to restore it, and had to do a baseband restore, revirginize, and now finally back to 1.1.1. It wrecked havoc with audio, sync errors, connection with mac. I will would wait until the dev team releases a stable version.
    1. chordmasta's Avatar
      chordmasta -
      Quote Originally Posted by Dark246 View Post
      Is it posible to downgrade from the jailbroken 1.1.3 to jailbroken 1.1.1?
      Yes, why would you want to.
    1. Sully's Avatar
      Sully -
      For some reason I feel as tho the Dev Team may be reveling in the early adopters issues. Kinda like "thats what they get for not waiting for US to release it"...

      Ouch!
    1. Dark246's Avatar
      Dark246 -
      Quote Originally Posted by chordmasta View Post
      Yes, why would you want to.
      Just so when the official Dev Team releases this jailbreak.
    1. dishsnthings's Avatar
      dishsnthings -
      Ive been running jailbroken 1.1.2 just fine for months (already have ATT so unlock is a non issue). I did the update, all seemed well except I got a script error on the final re-boot. Re-booted again and all was ok at 1.1.3, dont know why. Installer was present, but no apps. All my rings and music made it back into the phone from itunes. Phone worked and ran properly. Go to installer to re-install SMB and Customize, only to find they only work with 1.1.2, pissed me right off. So I chose to go backwards and all the effort to do so. But anyway that was my choice, everything about 1.1.3 seemed proper, icons wiggled, Locate me worked to about a block away. Edge icon was present. I will wait for official updates as well, I made all my own custom wallpapers/buttons/icons etc. and the two most needed apps (for me) are not updated yet.
    1. viP4x's Avatar
      viP4x -
      I did it, and I have the ******* same wifi issue ... the wifi signal bars dissapears!!1 and there is not more wifi!!!! =(
    1. Revan.Yang's Avatar
      Revan.Yang -
      Quote Originally Posted by stlcaddie View Post
      I dont have no service now...i did all steps, but now have no phone service...please help a homie out.
      I followed the guide. Now my iPhone is jailbroken on 1.1.3 but I have no service too. Does this has to do with my OOB 1.1.2 and bootloader 4.6? Is there any way to fix this while maintaining the jailbroken 1.1.3?
    1. macky801's Avatar
      macky801 -
      did you upgrade from 1.1.1 when you had an unlocked 1.1.2?
    1. xtianars's Avatar
      xtianars -
      Quote Originally Posted by Revan.Yang View Post
      I followed the guide. Now my iPhone is jailbroken on 1.1.3 but I have no service too. Does this has to do with my OOB 1.1.2 and bootloader 4.6? Is there any way to fix this while maintaining the jailbroken 1.1.3?
      to fix the no service issue just upload a lockdownd into the usr/libexec directory using ibrikr or something then restart the phone and plug it into itunes
    1. YodasMaster's Avatar
      YodasMaster -
      So let me get this right. If you have AT&T and you use this jail break method Apps wont work, Google's find me wont work, and possibly you will have no service.

      So you can move around your icons and make them wiggle, thats about it? Yeah, i'll wait for the rest of the devs to release it.