• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • 1.1.2 unlocked!
    The iPhone elite dev team says they've unlocked 1.1.2. Downloads are here on the Google code site. This is unconfirmed and untested as of right now, but if you just can't wait to get your 1.1.2 iPhone unlocked, there you go. Someone ping us in the comments below and let us know if it works for real.

    Click here for the anysim 1.1.2 download


    pf edit: as of yet the lockdownd issue is NOT resolved, so we do NOT have a SIM unlock for 1.1.2.

    via tuaw
    This article was originally published in forum thread: 1.1.2 unlocked! started by iphonejeff View original post
    Comments 198 Comments
    1. shawnie53's Avatar
      shawnie53 -
      to unbrick your 1.1.2 brick, look at my howto... Comments can be posted at:
      http://modmyi.com/forums/showthread....9929#post89929

      --------------------------------------------------------------------------------

      It seems that the new baseband will not work on 1.1.1, and since it doesn't seem that 1.1.2 can be jailbreaked or activated, those of you who upgraded to 1.1.2 and now have bricks (or semi-bricks if you downgraded to 1.1.1 and can not use phone functions) will have to restore the baseband. Here are the steps and the rar file includes everything you will need, except for the 1.1.1 and 1.0.2 firmware files, which can be downloaded below:

      1) If on 1.1.2, You will now need to go into restore mode on the phone (Hold both buttons, then let go of the power button when the phone turns off and keep holding the home button for a few more seconds, until iTunes says to restore) and downgrade using SHIFT-Restore to 1.1.1

      2) When in 1.1.1, You will now need to go into restore mode on the phone (Hold both buttons, then let go of the power button when the phone turns off and keep holding the home button for a few more seconds, until iTunes says to restore) and downgrade using SHIFT-Restore to 1.0.2

      3) Jailbreak and activate the phone using WINSTALLER (open WinstallerGUI.exe and click on activate)

      4) Install Installer.app using WINSTALLER by clicking on 'Install Application', then selecting the Installer.app folder

      5) Run Installer on your phone, (update if necessary) and install Community Sources (from Sources), BSD Subsystem (from System) and OpenSSH (from System) in that order.

      6) Using WinSCP, connect to your iPhone (user: root password:dottie) and upload:

      ICE03.14.08_G.eep
      ICE03.14.08_G.fls
      iEraser
      bbupdater
      secpack
      secpack.bin

      to /usr/bin on your iPhone.



      7) Using PuTTY, connect to your iphone (again user: root pass:dottie).

      Type in the following: (pressing the ENTER button after each line)

      launchctl

      unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist

      Now type in:

      cd /usr/bin

      chmod +x iEraser

      chmod +x bbupdater

      iEraser

      bbupdater -v

      At this point bbupdater will return saying that it could not ping the baseband. This is good and means it was successfully deleted.



      8) Overwrite with the new baseband by typing in the following:

      bbupdater -f *.fls -e *.eep

      It will run its course. When finished type in:

      bbupdater -v

      It should tell you that you have modem version 03.14.08_G.


      9) You will now need to go back into restore mode on the phone (Hold both buttons, then let go of the power button when the phone turns off and keep holding the home button for a few more seconds, until iTunes says to restore) and using the SHIFT-Restore method, restore to 1.02.

      10) You can now restore to 1.1.1 and use the *#307# method and jailbreakme.com to unlock.

      11) If you unlocked using AnySIM, you will need to reinstall it (In installer.app, add 'i.unlock.no/' (make sure to include that last slash) to your sources, and then you will have a new category called unlocking tools, in which you can install anysim, but make sure to install BSD subsystem again first!

      1.1.2 Baseband Downgrade Pack:
      http://rapidshare.com/files/68819542...epack.rar.html

      1.1.1 FW:
      http://appldnld.apple.com.edgesuite....a_Restore.ipsw

      1.0.2 FW:
      http://appldnld.apple.com.edgesuite....8_Restore.ipsw


      UPDATE:
      It seems that this method will also work to help people who purchased phones in the UK (with firmware 1.1.2 and the new baseband) to effectively downgrade to 1.1.1 with the 1.1.1 baseband, which will allow them to unlock their phones and install 3rd party apps, much like the US iPhone. It seems that the upgraded bootloader of the UK phones makes no difference.
    1. wicked lester's Avatar
      wicked lester -
      be carefull downgrading.

      here is my story. my 1.1.1 was acting all sorts of flakey this weekend. phone constantly soft booting and draining the battery big time. I had no choice but to connect to itunes and start the install of 1.1.2.

      So I decided to downgrade to 1.1.1 with no success, then I tried to downgrade to 1.0.2.
      success, but now my wifi and bluetooth dont work. So I tried to upgrade to 1.1.1 again.. no luck. so i updated to 1.1.2 hoping the firmware would re-install the wifi and bluetooth drivers.. no luck.

      so now i have a 1.1.2 brick, with no wifi, and no bluetooth... does anyone have a fix for this?

      Thanks in advance

      Wicked Lester
    1. shawnie53's Avatar
      shawnie53 -
      try to follow my guide right above your post!!!
    1. vampyros_wrath's Avatar
      vampyros_wrath -
      Correct me if I'm wrong. But doesnt the new 1.1.2 firmware prevent DFU mode? I read somewhere on this site that it does. If so, then wouldnt that essentially make virginizing impossible somehow? Just wondering.
    1. elfribo's Avatar
      elfribo -
      Quote Originally Posted by tonydrone View Post
      By "unlock" he meant that the firmware was unlocked. As in able to Jailbreak. That is different from a "Sim Unlock".
      I thought that so far that was called: activated, unlocked standing for Phone service unlocking
    1. jacobzking's Avatar
      jacobzking -
      you're wrong buddy. WRONG! you're always wrong! I hate you. No, I've upgraded to 1.1.2 like 10 times on the same stupid phone trying to get "anysim 1.2" to unlock it, but it no worky. but everytime I've been able to downgrade. lol, i didnt get to bed untill noon because i was up all night/morning, like 14 hours trying to unlock 1.1.2. i can activate and jailbreak it, but no unlock
    1. mofolo's Avatar
      mofolo -
      Does Apptapp still work with 1.1.2?

      You need OkToPrep before you update correct?
    1. Trini469's Avatar
      Trini469 -
      I tried updating to 112, now I get incorrect Sim. Damn shoulda waited. My phone was a unlocked 111 using anysim. Did the OKTOPrep!!!
    1. muccaeppollo's Avatar
      muccaeppollo -
      I can't belive that ... It happened for 1.0.2, then for 1.1.1, now the same for 1.1.2 .....
      Were you able to safetly unlock your iPhones in the past following MMI guides?
      Are you happy with your *working* 1.1.1 iPhone ?
      So why mess this blog up with those stupid questions - the same old stupid questions ???
      a) WAIT until the solution is officially tested !! Unless you think to be eligible to be part of the "elite" do not do random tests ...
      b) READ the post before ask something it was already discussed times and times before ...
      Is is clearly written everywhere that you have TO WAIT if you want to unlock (use your iPhone with a different SIM) 1.1.2.
      Remember the chinese script : sit on the side of the river and play with your 1.1.1 .... an unlocked 1.1.2. version will come, sooner or later .....
    1. arunreddys's Avatar
      arunreddys -
      how to i install any sim 1.2 to my iphone b coz ibrickr is not working how can i install new 1.2 any sim plz tell me coz im in new firmware 4.2.13_G VERSION plz help me my phone is not unlocked its just jailbroken i can see spring board only i cant make or recive calls

      how to i install any sim 1.2 to my iphone b coz ibrickr is not working how can i install new 1.2 any sim plz tell me coz im in new firmware 4.2.13_G VERSION plz help me my phone is not unlocked its just jailbroken i can see spring board only i cant make or recive calls
    1. bernd1960's Avatar
      bernd1960 -
      Hello,

      I like to get the german language support and also some minor changes of 1.1.2. I have a unlocked AT&T Iphone (done with ANYSIM) and it works fine.

      Now the discussion is refusing me. What I'm looking for is a step to step procedure going from 1.1.1 to 1.1.2. I have understood all the stuff of revirginzing in 90% and have done all those procedures. One of the important thing is that there is a described way back to 1.1.1 if something goes wrong. I understood the procedure downgrading 1.1.2 to 1.1.1, but the procedure going with less risc from 1.1.1 (unlocked) to 1.1.2 unlocked isn't clear to me.

      I understood:

      - Install an run Octoprep
      - Update to 1.1.2 via Itunes (holding shift and install new firmware)
      - Jailbreack by running Touchfree
      - Install ANYSIM 1.1.2
      - RUN ANYSIM

      That's it ??
    1. nikhil_nal's Avatar
      nikhil_nal -
      guys i bought a new i phone on nov 9th,...so is it version 1.1.2....if it is can i unlock it???n how plz help me out kinda desp
    1. Murfunit's Avatar
      Murfunit -
      Quote Originally Posted by nikhil_nal View Post
      guys i bought a new i phone on nov 9th,...so is it version 1.1.2....if it is can i unlock it???n how plz help me out kinda desp
      How is anyone supposed to know what firmware your phone is without some information? We're not magicians

      if you bought it on the 9th the chances are good tha it is NOT a 1.1.2 (Unless you're in the UK) but only you can tell, since you have the phone in your hands.
    1. nikhil_nal's Avatar
      nikhil_nal -
      well ..how to whether it is 1.1.2 or 1.1.1...??well if it is 1.1.1 will the ol jailbreak work??
    1. pleyah69bjay's Avatar
      pleyah69bjay -
      Quote Originally Posted by nikhil_nal View Post
      well ..how to whether it is 1.1.2 or 1.1.1...??well if it is 1.1.1 will the ol jailbreak work??
      plug it trough itunes itl tell you wich firmware you do have if its 1.1.1 then your good with jailbreakme
    1. nikhil_nal's Avatar
      nikhil_nal -
      is there any software for unlockin in windows?????????????
    1. shantanu's Avatar
      shantanu -
      i am not sure. I had unlocked my iphone using AnySim 1.1. After all the process it said Successfully unlocked. But I dont get any signal on my iphone. Any help?

      Hi there,
      I tried unlocking using anysim 1.1 and the result it said is successfully unlocked. but I am not able to make call as it shows no service. Any help???Thanks
    1. Murfunit's Avatar
      Murfunit -
      Quote Originally Posted by nikhil_nal View Post
      well ..how to whether it is 1.1.2 or 1.1.1...??well if it is 1.1.1 will the ol jailbreak work??
      If it's 1.0.X or 1.1.1 the AnySIM 1.1 will work with no problem

      it it's 1.1.2 you'll have to wait a few days - shouldn't be long now. The methods are in place, they're just being tested and cleaned up for release.
    1. supabkluva77's Avatar
      supabkluva77 -
      i need help downgrading my iphone to 1.1.1 i have 1.1.2. if n e 1 can help, would be gladly appreciated. ive follow the steps but itunes tells me can be down for sum reason.
    1. macky801's Avatar
      macky801 -
      So are there any updates on the progress?