• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • PwnageTool 2.0.2 & Installer 4 Soon
    Update: It will be released tomorrow (friday)

    According to their blog, the dev team will be releasing PwnageTool 2.0.2 sometime soon -- perhaps today. The release will be available through the built in updater in the current version of PwnageTool and via direct download for new users.

    What to expect:
    • Ability to pwn iPhone firmware version 2.0.1
    • An updated version of Cydia with bugfixes
    • Update: Installer 4 will be included with this release!
    • No 3g unlock

    The dev team also warns on their blog that you should not upgrade to firmware 2.0.1 via iTunes. Wait until PwnageTool 2.0.2 is released and upgrade to 2.0.1 with a custom ispw. Upgrading directly via iTunes will lessen the chances of you being able to unlock in the future. The dev team is still working on a 3g unlock solution.

    thanks Mooseman

    From the Dev Blog:

    Installer 4 and PwnageTool 2.0.2

    We’ve just had word that our friends at RiPDev almost have Installer 4 (Beta) ready for public beta release, with that awesome news we’ve decided to include it in the PwnageTool 2.0.2 release, we are waiting for the software from them and we need to quickly test and add a small couple of changes that go alongside Installer.

    Expected release date: Friday August 8th.
    This article was originally published in forum thread: PwnageTool 2.0.2 & Installer 4 Soon started by Cody Overcash View original post
    Comments 677 Comments
    1. burdell1's Avatar
      burdell1 -
      Dumb question, once i installed the new firmware...how do I get it out of recovery mode (where it shows the cable and the itunes logo)... it tried ziphone and ibrickr and neither seemed to work for it.
    1. RaMod's Avatar
      RaMod -
      Quote Originally Posted by bschucher View Post
      Using a mac BTW..
      Then it should be even more easier for u to do it. Just pwn using Pwnage Tool 2.0.2 and then use that Custom FW with iTunes And off you go!
    1. aqd84's Avatar
      aqd84 -
      winpwnd my iphone 3g first try..

      installer is installed and now firmware 2.0.1!!

      went smoothly..
    1. RaMod's Avatar
      RaMod -
      Quote Originally Posted by aqd84 View Post
      winpwnd my iphone 3g first try..

      installer is installed and now firmware 2.0.1!!

      went smoothly..
      Welcome to the club buddy!!!!
    1. youngpolo22's Avatar
      youngpolo22 -
      can someone plz help me, im stuck and my iphone 2g cannot be restored, itunes gives me the error everytime please help asap, srry im new here
    1. williamjv's Avatar
      williamjv -
      Finally got WinPwn to run in my machine. In case anyone has the same problem, make sure you have .Net 2.0 installed on your machine (go to windows update)

      Now as stated by RaMod in several post, can someone confirm if I have the right firmware for my phone?

      I downloaded this iPhone1,2_2.0.1_5B108_Custom_Restore.ipsw from .Mac - iDisk which I intend to use on my iPhone 3G (already jail broken with 2.0) and I am an AT&T Customer.

      Thanks,

      I just want to make i have the correct firm before i proceed to install it.
    1. RaMod's Avatar
      RaMod -
      Quote Originally Posted by williamjv View Post
      Finally got WinPwn to run in my machine. In case anyone has the same problem, make sure you have .Net 2.0 installed on your machine (go to windows update)

      Now as stated by RaMod in several post, can someone confirm if I have the right firmware for my phone?

      I downloaded this iPhone1,2_2.0.1_5B108_Custom_Restore.ipsw from .Mac - iDisk which I intend to use on my iPhone 3G (already jail broken with 2.0) and I am an AT&T Customer.

      Thanks,

      I just want to make i have the correct firm before i proceed to install it.
      You do have the correct FW for the 3G! Just put your phone in DFU mode and use that Custom FW with iTunes by pressing Shift+Restore and then select the Custom File.

      PS: since u have WinPwn you can now make your own Custom FW. But since u have one allready it will be much faster for u to pwn your iPhone!

      Laterz,
      RaMod
    1. iphonemajjik's Avatar
      iphonemajjik -
      No matter what i do or how i create the custom file, i always get error 6....i'll just wait for the new version of winpwn with all the bugs fixed.....2.0 is working good for me right now
    1. Puppet122's Avatar
      Puppet122 -
      is there any way to update without restoring the phone...id really hate to loose all my apps
    1. williamjv's Avatar
      williamjv -
      RaMod,

      Thank you for the confirmation. I still havent tried to install the firmware into my phone using iPhones like you said, I was considering to create a custom firm; however, I tried loading the .PSW file into WinPnw and got the following message:

      8/9/2008 4:05:29 PM - Unknown file: CDocuments and Settings\WillJV\Desktop\iPhone1,2_2.0.1_5B108_Cust om_Restore.ipsw

      Because of this I am not able to continue as the IPSW builder button is grayed out. I did double check that my iTunes app is 7.7.1 which is the current one.

      Any suggestions?
    1. RaMod's Avatar
      RaMod -
      Quote Originally Posted by williamjv View Post
      RaMod,

      Thank you for the confirmation. I still havent tried to install the firmware into my phone using iPhones like you said, I was considering to create a custom firm; however, I tried loading the .PSW file into WinPnw and got the following message:

      8/9/2008 4:05:29 PM - Unknown file: Cocuments and SettingsWillJVDesktopiPhone1,2_2.0.1_5B108_Custom_ Restore.ipsw

      Because of this I am not able to continue as the IPSW builder button is grayed out. I did double check that my iTunes app is 7.7.1 which is the current one.

      Any suggestions?
      Hello again!

      What you need to do is to use a FRESH FW file! U r using a Custom FW file and that's why the WinPwn is not taking it. Make sure u r using a new apple FW file and then pwn it Once u pwn an original FW you CAN NOT use it again to make another custom FW!
      Hope that helps!

      Later peeps!
      RaMod
    1. brikz's Avatar
      brikz -
      So this might sound noob, but i'm a little confuse about this.

      I use windows, have 3g already jailbroke using winpwn 2.0.0.3. I want to use the 2.0.0.4 but i am not going to update (itunes firmware or new version) like the developers and cydia say.) So if i use 2.0.0.4 do i use the ispw. of the old one (version 2.0 (5a347) or the new one (the 2.0.1 (5b108)? I have it all open but i'm just not sure which version to use, or if i should just wait.

      Thanks
    1. williamjv's Avatar
      williamjv -
      Quote Originally Posted by RaMod View Post
      Hello again!

      What you need to do is to use a FRESH FW file! U r using a Custom FW file and that's why the WinPwn is not taking it. Make sure u r using a new apple FW file and then pwn it Once u pwn an original FW you CAN NOT use it again to make another custom FW!
      Hope that helps!

      Later peeps!
      RaMod
      And Thanks to you again LOL!

      I went over a few post where it stated I do not have to check the activation box or the YouTube fix as I am a current AT&T customer. Is that correct?

      I found this one iPhone1,2_2.0_5A347 over at http://www.********************/2008...-20-jailbreak/ is that the one i need or is that the 2.0 Firm?

      Nevermind my last post... that's the 2.0 (which I already have)... I'm still searching for a FW that i can use with WinPwn....
    1. imode's Avatar
      imode -
      Quote Originally Posted by FLAKDEEZYuheard View Post
      Pwnage keeps saying i dnt have enough space...when i have more then enough space ...someone please help
      /tmp is a "temporary" file directory.

      1. open terminal
      2. cd /tmp
      3. sudo rm -rf *

      see... people will help you when you type in proper English...
    1. jlatnyc's Avatar
      jlatnyc -
      Quote Originally Posted by youngpolo22 View Post
      can someone plz help me, im stuck and my iphone 2g cannot be restored, itunes gives me the error everytime please help asap, srry im new here
      Make sure you UPDATE iTunes to the most recent version.
    1. bschucher's Avatar
      bschucher -
      So.. have mac.. Had pwned 2.0 Updated to 2.0.1 via iTunes since i wont be unlocking. Pwned 2.0.1 and now have no service... Any ideas???

      Cant believe I missed unchecking the activate.. Sorry for the mind fart..
    1. RaMod's Avatar
      RaMod -
      Quote Originally Posted by williamjv View Post
      And Thanks to you again LOL!

      I went over a few post where it stated I do not have to check the activation box or the YouTube fix as I am a current AT&T customer. Is that correct?

      I found this one iPhone1,2_2.0_5A347 over at http://www.********************/2008...-20-jailbreak/ is that the one i need or is that the 2.0 Firm?

      Nevermind my last post... that's the 2.0 (which I already have)... I'm still searching for a FW that i can use with WinPwn....
      Here you go! It should be the last one on that page for the 3G iPhone Use that with your WinPwn and then iTunes and u r good to go

      The link: iClarified - iPhone - Where To Download iPhone Firmware Files From

      See you on the other side

      Have fun!!
    1. dontmakemehurtu's Avatar
      dontmakemehurtu -
    1. cockyjeremy's Avatar
      cockyjeremy -
      When my phone is plugged in.. wall/pc it won't receive texts.. WTF. Anyone have any ideas on this?!
    1. saint24's Avatar
      saint24 -
      Ok..i need some help... Jailbroken 2.0.0 3g iphone, upgraded today to 2.0.2 thru pwnage but getting no network ( edge or 3g) please help!!!!

      Thanks