• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • [Release] Pwnage & Quickpwn 2.5.5 for OSX


    The iPhone-Dev Team released new OSX versions of pwnage and quickpwn this morning for firmware 2.2.1 compatibility. For 3G users that want to upgrade to 2.2.1 and unlock you MUST use pwnage tool and disable the baseband update to conserve your 2.28.00 baseband. For first generation users there is no baseband update so just restore in iTunes to 2.2.1 and use the new version of Quickpwn to jailbreak.

    A new version of Yellowsn0w has been uploaded for 2.2.1 compatibility as well so after you jailbreak add the source: apt9.yellowsn0w.com in Cydia and install version 0.9.7 and then reboot. This versions DOES NOT WORK WITH THE 2.2.1 BASEBAND so if you want to remain unlocked you MUST update with a custom firmware (via Pwnage Tool) that does not include the baseband update.

    For 3G users that have upgraded your baseband to 2.30.00 there is no way to unlock or downgrade your baseband so you are stuck until the Dev team can figure out how to crack the new baseband which may not be possible... no one knows yet.

    Mac PwnageTool

    MMi Member Mirror
    MEGAUPLOAD - The leading online storage and file delivery service
    RapidShare: Easy Filehosting
    http://therepository.binarytide.com/...Tool_2.2.5.dmg
    http://iphone-dev.fgv6.net/PwnageTool_2.2.5.dmg
    http://iphone.schwarzmetall.cn/PwnageTool_2.2.5.dmg
    http://rabstalk.bplaced.net/mirrors/...Tool_2.2.5.dmg
    http://jmcoon.net/PwnageTool_2.2.5.dmg
    http://downloads2.ipod.backshot.eu/PwnageTool_2.2.5.dmg
    http://www.iphone-storage.de/PwnageTool_2.2.5.dmg
    http://miphone.ca/iphone-dev/PwnageTool_2.2.5.dmg

    Mac QuickPwn

    MMi Member Mirror
    MEGAUPLOAD - The leading online storage and file delivery service
    RapidShare: Easy Filehosting
    http://therepository.binarytide.com/...kPwn_2.2.5.dmg
    http://iphone-dev.fgv6.net/QuickPwn_2.2.5.dmg
    http://iphone.schwarzmetall.cn/QuickPwn_2.2.5.dmg
    http://rabstalk.bplaced.net/mirrors/QuickPwn_2.2.5.dmg
    http://jmcoon.net/QuickPwn_2.2.5.dmg
    http://www.iphone-storage.de/QuickPwn_2.2.5.dmg
    http://downloads2.ipod.backshot.eu/QuickPwn_2.2.5.dmg
    http://miphone.ca/iphone-dev/QuickPwn_2.2.5.dmg

    Official Torrent Links:

    PwnageTool 2.2.5 for Mac OSX is here
    QuickPwn 2.2.5 for Mac OSX is here

    The process hasn't changed -- Same guides work just use the new firmware and new PwnageTool
    Pwnage 2.x Guide - ModMyi - Wiki
    Pwnage 2.x Guide 3G - ModMyi - Wiki


    Bootloader Files
    Free File Hosting Made Simple - MediaFire

    Firmware
    iPhone 3g 2.2.1 Firmware Download
    iPhone 2g 2.2.1 Firmware Download
    iPod Touch 1g 2.2.1 Firmware Download

    Windows Users: For 3G iPhones you will have to download and use a custom built 2.2.1 firmware with the baseband update disabled.

    Oh and if you haven't patched OSX 10.5.6 the devs posted a neat little guide:

    As noted previously OS X 10.5.6 introduced a bug that affected the use of DFU mode. with some Macs. There have been previously published hacks and techniques to fix this, but here is another method that can be used to easily restore functionality.
    1. You will need an account with ADC (Apple Developer Connection) this is free and takes a few minutes to sign up, you should read the terms and conditions carefully and you should only sign up if you are thinking of developing applications in the future - Apple Developer Connection - Mac Dev Center
    2. Download the disk image “IOUSBFamily-315.4-log.dmg” for Mac OS X 10.5.5 Build 9F33” (yes, that is a “5” in 10.5.5 - this is a developer debug package of the USB kernel extension).
      Unplug non-vital USB equipment, such as external DVD writers, USB scanners, USB mass storage devices,
    3. Unplug non-vital USB equipment, such as external DVD writers, USB scanners, USB mass storage devices, at the most leave a Keyboard and Mouse connected.
    4. nstall IOUSBFamily-315.4.1.pkg from within the disk image
    5. Reboot your system!
    6. Perform necessary DFU activity with QuickPwn or PwnageTool.
    7. Download the disk image “IOUSBFamily-327.4.0-log.dmg” for Mac OS X 10.5.6 Build 9G55
    8. Install IOUSBFamily-327.4.0.pkg from within the disk image
    9. Reboot your system!
    10. Reattach your USB peripherals.

    OR

    Simply connect through a USB Hub
    This article was originally published in forum thread: [Release] Pwnage & Quickpwn 2.5.5 for OSX started by Poseidon79 View original post
    Comments 153 Comments
    1. MrWHOx's Avatar
      MrWHOx -
      yea. WE'RE asking for the one ALREADY PATCHED 2.2.1 firmware for the 3g WITHOUT the baseband update... Can you post one?
    1. alexcutter's Avatar
      alexcutter -
      Quote Originally Posted by Troy_Hatton View Post
      That is it right there. I am also having problems as a legit at&t user getting a signal. Anyone else and if so, without having to use yellowsn0w, what can I do? Thanks!
      As I mentioned earlier in this thread, I had the same problem. I restored the phone to the default settings, and re-ran PwnageTool in the non "expert" mode (basic?).

      That restored my signal.

      Quote Originally Posted by MrWHOx View Post
      yea. WE'RE asking for the one ALREADY PATCHED 2.2.1 firmware for the 3g WITHOUT the baseband update... Can you post one?
      What exactly are you asking for, the custom ipsw that pwnagetool created? How would I know if it's without the baseband update?
    1. Clemons003's Avatar
      Clemons003 -
      Quote Originally Posted by alexcutter View Post
      As I mentioned earlier in this thread, I had the same problem. I restored the phone to the default settings, and re-ran PwnageTool in the non "expert" mode (basic?).

      That restored my signal.



      What exactly are you asking for, the custom ipsw that pwnagetool created? How would I know if it's without the baseband update?
      When you use pwnagetool you are creating a custom ispw...Which is basically your own firmware...Its like your personal 2.2.1 package...It gives you the option in expert mode not to upgrade the baseband...Also when you have finished pwning your phone and you go to settings if you did upgrade the baseband it will say 2.28.0 if you did upgrade it it will say something like 2.33.0 or something like that...the unlock for the 3g only works on baseband 2.28.0...
    1. Troy_Hatton's Avatar
      Troy_Hatton -
      Quote Originally Posted by alexcutter View Post
      As I mentioned earlier in this thread, I had the same problem. I restored the phone to the default settings, and re-ran PwnageTool in the non "expert" mode (basic?).

      That restored my signal.



      What exactly are you asking for, the custom ipsw that pwnagetool created? How would I know if it's without the baseband update?
      Does that still install Cydia?
    1. deenybird's Avatar
      deenybird -
      Quote Originally Posted by MrWHOx View Post
      so you have a mac? can you post a copy of 2.2.1 for the iphone 3g WITHOUT the baseband update???

      Thanks in advance!
      its been over 7 hours since this was first requested...
    1. lightmaster's Avatar
      lightmaster -
      Why is everyone asking for someone else to spend time to create a custom firmware file without the baseband upgrade. PwnageTool for both Mac and Windows has been out for hours now. Anyone should be able to create their own custom firmware.
    1. alexcutter's Avatar
      alexcutter -
      Quote Originally Posted by Clemons003 View Post
      When you use pwnagetool you are creating a custom ispw...Which is basically your own firmware...Its like your personal 2.2.1 package...It gives you the option in expert mode not to upgrade the baseband...Also when you have finished pwning your phone and you go to settings if you did upgrade the baseband it will say 2.28.0 if you did upgrade it it will say something like 2.33.0 or something like that...the unlock for the 3g only works on baseband 2.28.0...
      My "Modem Firmware" says 02.30.03

      Quote Originally Posted by Troy_Hatton View Post
      Does that still install Cydia?
      yes
    1. Z33Driver's Avatar
      Z33Driver -
      Quote Originally Posted by Poseidon79 View Post
      Note: You NEVER use the "upgrade" button in iTunes on a jailbroken phone or you will lose 500MB of data due to back-up files. For example.. if you were on firmware 2.0 and jailbroke.. then upgraded to 2.0.1 > 2.0.2 > 2.2 > 2.2.1 you would have lost a total of 2GB of data that is now completely unusable. The data loss is because Cydia moves your files around to free up space. The moved files become inaccessible but stay on your disk which means you essentially just lose the space. The more apps you had installed in Cydia, the more space you lose.
      If you use the "upgrade" button is that data lost forever? Can it be brought back by restoring?
    1. Bluestraw's Avatar
      Bluestraw -
      Quote Originally Posted by lightmaster View Post
      Why is everyone asking for someone else to spend time to create a custom firmware file without the baseband upgrade. PwnageTool for both Mac and Windows has been out for hours now. Anyone should be able to create their own custom firmware.
      PwnageTool isn't available for windows!!!
    1. imagineThiss's Avatar
      imagineThiss -
      Quote Originally Posted by Bluestraw View Post
      PwnageTool isn't available for windows!!!
      this freaking guys got me happy for nothing.. i knew it wasnt true but dam it got me happy!!!!!!!!!!
    1. MrWHOx's Avatar
      MrWHOx -
      Quote Originally Posted by alexcutter View Post
      My "Modem Firmware" says 02.30.03
      fail, dude. it's supposed to say 2.28.00

      we need one that is Pwned WITHOUT the baseband/modem update... it SHOULD be in the options. you Pwned without checking the options.
    1. Jasonator's Avatar
      Jasonator -
      PLEASE!!!!!I need help...I just got a 3G 8Gb iphone...it was on on 2.0 and I cannot figure out how to upgrade the baseband to 2.28..it is currently on 1.48.02...How do I upgrade the both the baseband and the firmware to unlock? If I upgrade with iTunes...i get the new 2.30 baseband, if I use custom firmware that does not undate the base then I stay where I am ....Please advice or link to the correct file for 2.2 unlock, with 2.28 baseband. Thank you alot!!!
    1. MrWHOx's Avatar
      MrWHOx -
      Download the 2.2 firmware for the 3g and restore it with that version. Then jailbreak with that 2.2 update to get the 2.28.00 baseband. DO NOT TRY THE 2.2.1 FIRMWARE! IT WILL NOT ALLOW YOU TO UNLOCK! go to quickpwn.com for more info on that stuff or search this forum.
    1. lightmaster's Avatar
      lightmaster -
      Quote Originally Posted by Bluestraw View Post
      PwnageTool isn't available for windows!!!
      Sorry man. I don't use Windows. I saw a post on the homepage about Quickpwn being released for Windows and I misread it thinking it was for PwnageTool. I'll download the the iPhone 3G 2.2.1 firmware and make a custom firmware without the baseband update.
    1. Bluestraw's Avatar
      Bluestraw -
      Quote Originally Posted by lightmaster View Post
      Sorry man. I don't use Windows. I saw a post on the homepage about Quickpwn being released for Windows and I misread it thinking it was for PwnageTool. I'll download the the iPhone 3G 2.2.1 firmware and make a custom firmware without the baseband update.
      And then if you're a REAL nice person you may be kind enough to upload your custom firmware for us folk without any Mac-owning friends?!
    1. rajunic's Avatar
      rajunic -
      Tried to use the MAC Pwnage Tool on a 3G version, created a custom firmware but the phone keeps on rebooting after upgraded.......
    1. MrWHOx's Avatar
      MrWHOx -
      Quote Originally Posted by lightmaster View Post
      Sorry man. I don't use Windows. I saw a post on the homepage about Quickpwn being released for Windows and I misread it thinking it was for PwnageTool. I'll download the the iPhone 3G 2.2.1 firmware and make a custom firmware without the baseband update.
      please kind person! please upload one for us! (of course, test it first, cuz i dont want to download it and turn my 3g into a 16gig iTouch, lol).
    1. lightmaster's Avatar
      lightmaster -
      Quote Originally Posted by rajunic View Post
      Tried to use the MAC Pwnage Tool on a 3G version, created a custom firmware but the phone keeps on rebooting after upgraded.......
      When you create the custom firmware, do NOT add any packages or sources to Cydia, that is what's causing your reboots.


      Quote Originally Posted by MrWHOx View Post
      please kind person! please upload one for us! (of course, test it first, cuz i dont want to download it and turn my 3g into a 16gig iTouch, lol).
      I'm downloading the firmware right now, but it will take about 20 minutes to download. I'll post when it finishes downloading and then I'll post a link when the custom firmware is complete.
    1. rajunic's Avatar
      rajunic -
      Thanks for the reply, but I haven't add any of the sources or anything extra to Cydia besides the default stuffs.
    1. MrWHOx's Avatar
      MrWHOx -
      Quote Originally Posted by lightmaster View Post
      I'm downloading the firmware right now, but it will take about 20 minutes to download. I'll post when it finishes downloading and then I'll post a link when the custom firmware is complete.
      EHYEAH!!!! ALRIGHT! YOU DA MAN! please test it first, though... I cant bear the though of having a useless iphone... THANKS IN ADVANCE, MAN!