• Your favorite

    Apple

    ,

    iPhone

    ,

    iPad

    ,

    iOS

    ,
    Jailbreak
    , and
    Cydia
    site.
  • WinPwn 2.0 Released


    cmw has released WinPwn 2.0 - you can now jailbreak your 2.0 iPhone/iPod Touch/iPhone 3G in Windows easily.

    The WinPwn site is up and down with the intense traffic, but here's the post, in case you can't get it to load...

    WinPwn 2.0

    - Support for both 1.1.4 and 2.0

    - Custom Image Support

    - Custom Payload Support

    - 3g iPhone support


    2.0 How to:

    - 1) First create a custom IPSW using the IPSW Builder.

    - 2) Click "Ipwner" and browse for the custom IPSW that you just created. This will pwn itunes and allow you to flash
    Custom IPSW files via DFU mode

    - 3) Once you have pwned Itunes, put your phone into DFU mode. If you don't know how to do this click
    Here.

    - 4) Once you are in DFU mode Itunes will pop up and then you can hold shift and click restore and browse to your custom IPSW file.


    Done!
    Important Notes
    Remove Winpwn 1.0 completely if you have it installed. Installing over the top of WinPwn 1.0 will cause problems.
    Make sure you have the latest version of iTunes ( Currently 7.7)
    If you already have service with AT&T do not activate or install Youtube Fix

    Thanks again for all those who supported me. WinPwn was made possible by PlanetBeing, Squpix and the dev team ( Especially Wizdaz, MuscleNerd, Gray, Pumpkin, bgm, roxfan ). I will be updating WinPwn with some better features and upgrading the credits and help sections over the next few days.

    Much love
    cmw
    Here's a ModMyI.com mirror for ya of the file (here's a non-member one), or you can grab it from RapidShare.

    Thanks to the dozens that sent this in.

    Also, cmw says there seems to be issue with Cydia on some XP machines, and he will be releasing a fix tomorrow.

    Edit Poseidon: Here is a nice guide written by theiphoneproject. I'm sure we'll have one up soon...

    WinPwn 2.0 Guide


    The new release 2.0.0.3 is out which should fix the Cydia/XP bug along with some others listed

    Here's some more useful info on firmware files:

    Quote Originally Posted by skillzdan
    for the new winpwn, you need to make sure you're using the right firmware for your phone or it will be buggy / cause problems.

    there is one firmware for the 3g (which winpwn recognizes and doesnt allow unlock) and there is one for the 1st gen which winpwn will recognize and allow unlock. you should put this in the post so people can download the correct firmware.

    here is link to both.

    iPhone 3g firmware:
    http://appldnld.apple.com.edgesuite....7_Restore.ipsw

    iPhone first generation firmware:
    http://appldnld.apple.com.edgesuite....7_Restore.ipsw
    This article was originally published in forum thread: WinPwn 2.0 Released started by Kyle Matthews View original post
    Comments 999 Comments
    1. bluemax189's Avatar
      bluemax189 -
      ^only very few people have had this work on vista..... ive think ive tried every possible way on vista.....probably done maybe like 10-12 stock restores too just to start out with a clean iphone.
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by GenghisPhlip View Post
      @faseone: You got beer at your house?
      I got some corona's.. a bottle of henney with redbull.. johnny walker black.. even wine...
      you in NY... lets get drunk and jailbreak iphones LOL
    1. Trinirspeed's Avatar
      Trinirspeed -
      Got the new software, im running vista on the older iphone and everytime i click iPwner it says its pwning itunes then they both shutdown.
      Going without a cellphone for a week SUCKS!
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by bluemax189 View Post
      ^only very few people have had this work on vista..... ive think ive tried every possible way on vista.....probably done maybe like 10-12 stock restores too just to start out with a clean iphone.
      What .net framework you have.?
      Are you the only user on the pc?

      My specs
      I am the only user(administrator)
      I used winrar to extract winpwn
      I ran the .exe as admin
      ran the program as admin.
      never checked compatibility mode... nada
      my regular 2.0 update is not in any itunes folder i have it in and iphone folder i made on my C:/
      my custom i create i put in the same place
      ... only error i got was trying to pwn itunes the first time and just tried again and worked..
      ... only other error i got was me not putting the iphone in DFU properly
    1. 97vrsix's Avatar
      97vrsix -
      Im in springfield mass, where in NY are you? i'm taking a road trip!! lol I have a lot of family out that way
    1. bluemax189's Avatar
      bluemax189 -
      well some one come down to baltimore too!!!!!!!
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by 97vrsix View Post
      Im in springfield mass, where in NY are you? i'm taking a road trip!! lol I have a lot of family out that way
      I'm in Yonkers LOL!
    1. 97vrsix's Avatar
      97vrsix -
      how far is that? Under a hour or so? Hey I got beer, tree's, computer parts galor, run an audio shop! We could run some fun!
    1. bijju's Avatar
      bijju -
      Guzy just get

      latest .net framwork
      version 2.0.0.2
      7.7 itunes
      get good boot loader
    1. silentshadow2049's Avatar
      silentshadow2049 -
      Just wanted to update everyone on my progress.

      I updated my phone to original 2.0 firmware. After this update I created a new custom ipsw for at&t settings (Cydia only). I restored from the custom ipsw and am now in the process of restoring my backup.

      Windows Vista just can't seem to get over the custom ipsw hurdle. My XP machine had no problems doing any step of pwning my iPhone.

      For other legit at&t users who are stuck:
      -As others have said, you should definitely update your phone to official 2.0 before you attempt a custom 2.0 restore.
      -If you get the message about being unable to get the required information from the iPhone, you need to remake your custom ipsw file and make sure you have ONLY Cydia checked in your settings and advanced settings.
      -And lastly, you need patience, if you don't get it the first time, it may take 1 or 2 more times to get it working!

      Good luck to everyone.
    1. GenghisPhlip's Avatar
      GenghisPhlip -
      I might be wanted in NY so I'd better stick to doin my drinkin and jailbreakin in Texas LOL
    1. helpmetomod's Avatar
      helpmetomod -
      I DID IT AFTER 1601 ERROR WHEN RESTORE CUSTOM FIRMWARE.

      Hi all,

      i have done update to 2.0 used winpwng2.0.0.2 after many tries. Here is the deal:

      I could not used vista to do it though, i dont know somehow winpwng doesnt like it. On my XP, i remove itune, quicktime, apple update, device support. Just remove all like you have never install itune before, also delete itune folder and then use winpwng2.0.0.2. It should work now if you try this. REMEMBER to put iphone into DFU corectly. Best wishes.
    1. fresh801's Avatar
      fresh801 -
      2.2 helps alot of the issues
    1. tattoojack's Avatar
      tattoojack -
      NM


      anyone using the 4.6 bl neutered and unlocked.

      i am and no problems. locate me is pretty accurate.

      mmi on edge is almost as fast as wifi, and i have signal on tmobile almost everywhere.
    1. bijju's Avatar
      bijju -
      Quote Originally Posted by silentshadow2049 View Post
      Just wanted to update everyone on my progress.

      I updated my phone to original 2.0 firmware. After this update I created a new custom ipsw for at&t settings (Cydia only). I restored from the custom ipsw and am now in the process of restoring my backup.

      Windows Vista just can't seem to get over the custom ipsw hurdle. My XP machine had no problems doing any step of pwning my iPhone.

      For other legit at&t users who are stuck:
      -As others have said, you should definitely update your phone to official 2.0 before you attempt a custom 2.0 restore.
      -If you get the message about being unable to get the required information from the iPhone, you need to remake your custom ipsw file and make sure you have ONLY Cydia checked in your settings and advanced settings.
      -And lastly, you need patience, if you don't get it the first time, it may take 1 or 2 more times to get it working!

      Good luck to everyone.
      Quote Originally Posted by helpmetomod View Post
      I DID IT AFTER 1601 ERROR WHEN RESTORE CUSTOM FIRMWARE.

      Hi all,

      i have done update to 2.0 used winpwng2.0.0.2 after many tries. Here is the deal:

      I could not used vista to do it though, i dont know somehow winpwng doesnt like it. On my XP, i remove itune, quicktime, apple update, device support. Just remove all like you have never install itune before, also delete itune folder and then use winpwng2.0.0.2. It should work now if you try this. REMEMBER to put iphone into DFU corectly. Best wishes.
      Quote Originally Posted by fresh801 View Post
      2.2 helps alot of the issues
      This stuff is working good in vista also man i did 4 iphones in vista up to now

      version 2.0.0.2 helps many issues

      File: NEW_winpwn_2.0.0.2_Setup.rar
      DownloadLink:
      RapidShare: Easy Filehosting

      Mirror

      http://www.megaupload.com/?d=K21OVSR7
    1. lachalupa09's Avatar
      lachalupa09 -
      Hey guys by mistake i put the 2.0 not the custom one!! When i open winpwn i click on Browse i chose the 2.0 restore for 1 gen iphone, i do all the steps then i clicked on Build after is building and saved on my folders the automatically closes. On your guide it says Ipwner but if the program closes i can not do it, because is closed. So what i do i open winpwn, i click on browse and choose 1 gen restore now i'm able to hit ipwner then i choose the custome one (i guess that's the one i have to choose) then a pop up screen says "your itunes has been Pwned" but when i got to Itunes i hold shift and restore i choose the custom IPSW, i get the error 1403! As of now my phone is locked can someone help me? Be patient thanks in advance
    1. faseone's Avatar
      faseone -
      Quote Originally Posted by silentshadow2049 View Post
      Just wanted to update everyone on my progress.

      I updated my phone to original 2.0 firmware. After this update I created a new custom ipsw for at&t settings (Cydia only). I restored from the custom ipsw and am now in the process of restoring my backup.

      Windows Vista just can't seem to get over the custom ipsw hurdle. My XP machine had no problems doing any step of pwning my iPhone.

      For other legit at&t users who are stuck:
      -As others have said, you should definitely update your phone to official 2.0 before you attempt a custom 2.0 restore.
      -If you get the message about being unable to get the required information from the iPhone, you need to remake your custom ipsw file and make sure you have ONLY Cydia checked in your settings and advanced settings.
      -And lastly, you need patience, if you don't get it the first time, it may take 1 or 2 more times to get it working!

      Good luck to everyone.
      Glad to hear your up and running.... dont know why it aint working for some

      Quote Originally Posted by lachalupa09 View Post
      Hey guys by mistake i put the 2.0 not the custom one!! When i open winpwn i click on Browse i chose the 2.0 restore for 1 gen iphone, i do all the steps then i clicked on Build after is building and saved on my folders the automatically closes. On your guide it says Ipwner but if the program closes i can not do it, because is closed. So what i do i open winpwn, i click on browse and choose 1 gen restore now i'm able to hit ipwner then i choose the custome one (i guess that's the one i have to choose) then a pop up screen says "your itunes has been Pwned" but when i got to Itunes i hold shift and restore i choose the custom IPSW, i get the error 1403! As of now my phone is locked can someone help me? Be patient thanks in advance
      are you going into DFU mode when restoring...?
      properly?
    1. jsanchey's Avatar
      jsanchey -
      So when i push restore. Where is the firmware located at? What if i put my custom firmware in the place of the actual restore?
    1. Muggz5's Avatar
      Muggz5 -
      Quote Originally Posted by helpmetomod View Post
      I DID IT AFTER 1601 ERROR WHEN RESTORE CUSTOM FIRMWARE.

      Hi all,

      i have done update to 2.0 used winpwng2.0.0.2 after many tries. Here is the deal:

      I could not used vista to do it though, i dont know somehow winpwng doesnt like it. On my XP, i remove itune, quicktime, apple update, device support. Just remove all like you have never install itune before, also delete itune folder and then use winpwng2.0.0.2. It should work now if you try this. REMEMBER to put iphone into DFU corectly. Best wishes.


      Thats all well and good but did you reinstall itunes before installing the new winpwn? trying to understand how you would update without having itunes
    1. bigtruth's Avatar
      bigtruth -
      After 8 hours trying to get it working on Vista, I can confirm I got all errors repoted so far on Vista, I used 3 laptops all on Vista ultimate all with no luck, I then remembered I had other 2 old laptops still on XPsp2...... yes you guessed it right, it worked on the first try.

      Please do not waste you time using Vista.